Low Thermal Conductivity Rock Wool Product
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 300 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
rock wool material
density 60-200 kg/m3
moisture rate<5%
working temp. 268C-650C
thermal conductivity 0.03-0.044
rock wool specification:
1. fire rated
2. insulation.
3.light weight
4. density: 60-200kg/m3
Performance | Unit | Index | Standard |
Bulk Density | (kg/m3) | 60-200 | GB/T 11835-2007 |
Fiber Average Diameter | (μ m) | ≤6.0 | GB/T 11835-2007 |
Thermal conductivity | Mean temperature (°C) | 70 | GB/T 11835-2007 |
(w/n.k) | ≤0.044 | GB/T 11835-2007 | |
Thermal Load Shrinkage Tem. | (°C) | ≥350 | GB/T 11835-2007 |
Organic Content | % | ≤4.0 | GB/T 11835-2007 |
Shot Content | % | ≤12.0 | GB/T 11835-2007 |
Excellent for heat preservation, thermal insulation, sound absorption;
2. Non-combustible, nontoxic, and resistant to corrosion;
3. Low thermal conductivity, stable chemical property, low moisture rate and good hydrophobicity;
4. Low weight by volume, good rebound elasticity;
5. Low constructional cost, short cycle of works, non-stimulation to the skin.
Fire resistant quilt Glass wool ,Building materials
Mainly products:
Glass wool board , glass wool felt ,glass wool pipe ,glass wool bar
Rock wool board , rock wool felt , rock wool pipe ,rock wool bar
Aluminum silicate products
- Q: What are the building energy saving materials?
- At present, China's common energy-saving insulation materials are mainly rock wool, glass wool, polystyrene foam, cement, polystyrene board, silicate composite insulation mortar.
- Q: How can the exhaust pipe of a gas water heater be insulated by going through the glass?
- Gas water heater exhaust pipe are now dual structure: the inner tube is the exhaust pipe, the fan will strong combustion exhaust water heater forcibly discharges the indoor air inlet pipe; the outer tube is, the outer air (oxygen) gas suction water heater for combustion.
- Q: What's the difference between glass fiber and mineral wool?
- Referred to as mineral wool. With non flammable, no mildew, no borers and other properties. Made into felt, blankets, mats, ropes, plates and so on. Used as sound absorption, shock absorption and heat insulation material.
- Q: What are the differences between slag wool and rock wool?
- Rock wool and slag wool, chemical composition and acidity coefficient comparison in our country, the main raw material for blast furnace slag slag cotton general or other metallurgical slag, the main raw material for rock wool basalt or diabase, the chemical composition of the differences between them are larger (
- Q: Protective clothing is glass cotton wool type
- Rock wool is mainly a small number of fibers, more harmful to the human body, so it is recommended that operators wear protective clothing in operation.Pure textiles, natural fibers, cotton, hemp, wool, silk, chemical fiber, polyester, viscose, nylon, nylon, spandex, polypropylene fiber, Teflon, etc.. A blended fabric is a fabric woven from two or more of the above materials. Blended fabric is more suitable for the fabric of work clothes. According to the different personal style structure and loose. Before and after the open. Open cover and bare. Early and open. Then the body and in vitro.
- Q: What are the advantages of inorganic fiber spraying in construction engineering?
- Inorganic fiber spraying is a new type of environmentally friendly architectural coatings, mainly composed of inorganic fiber and water-based adhesive composition, by mixing by air pressure pump for spraying, spraying and atomized water mixed to form coating on the substrate to protect. The coating can meet the requirements of sound absorption, thermal insulation and fire protection.
- Q: The classification of exterior wall insulation and its main categories
- 1, exterior wall insulation usually(1) external thermal insulation of plate;(2) polyurethane rigid foam exterior insulation;(3) polyphenyl granule external thermal insulation;(4) inorganic insulation mortar external insulation;This is divided into small categories, such as sheet insulation, polystyrene board, inorganic insulation, expansion of glass beads2, rock wool exterior wall insulation, if there are rock wool board belongs to plate insulation, good combustion performance, good heat insulation performance, but relatively waterproof, bad, higher prices.Thin plastering exterior wall insulation does not indicate insulation material.Polyurethane insulation has been mentioned above, but the construction is not very convenient, and the combustion performance is poor and the price is higher.Polystyrene particles are good in every respect, and the only disadvantage is that the combustion performance can not reach the grade A (A1)
- Q: The water heater for what the security hole tube
- Asbestos exposure to the skin for a long time, harmful to the skin, eating into the body harmful. Pack on the exhaust pipe, do not move it, there is no harm.
- Q: What kinds of fire retardant coatings are there in steel structures?
- The utility model can be expanded and expanded slowly when the fire is in place to form a dense and hard fireproof heat-insulating layer, and the fireproof layer has strong fireproof impact property, and the temperature rise of the steel is delayed, and the steel member is effectively protected. Ultra thin intumescent steel structure fire retardant coating can be sprayed, brushed or rolled. It is generally used in building steel structures with a fire resistance requirement of less than 2 h. There have been fire resistance to meet or exceed the new ultra-thin fireproof coating for steel structure of 2 varieties of H, it is mainly based on the special structure of the poly methyl acrylate or epoxy resin and amino resin, chlorinated paraffin, compound as base adhesive, with high degree of polymerization of ammonium polyphosphate, double itrate alcohol, melamine as four fire retardant system, adding titanium dioxide, wollastonite and other inorganic refractory material, using 200# as solvent and solvent oil compound. All kinds of light steel structure, grid and so on, use this type of fire retardant coatings for fire protection.
- Q: Why should the insulation board be spliced when it is installed?
- The EPS plate shall be bonded in a vertical arrangement and the vertical seam shall be staggered along the line. Insulation board construction fault seam stitching truth with brick walls are brick seam is a reason for strong security.
Send your message to us
Low Thermal Conductivity Rock Wool Product
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 300 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords