LED Spotlight MR16-PL021-2835T3W-12V
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 1000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
LED Bulb Light was designed to replace the tradintional wasteful incandcent bulbs.With more than 90% energy saving, is an idea repalcement for 40W -70W traditional bulbs & lighting fixtures.
Specifications of LED Bulb Light
1. 960Lm
2. 80 CRI
3. 100W incandescent bulb replacement
4.12W
Features of LED Bulb Light
1. Mini sizes, similar as traditional incandescent candle bulb.
2. Over 100lumens per watt, Cooling system inside reduces the heat, doubles the life time compare to normal LED lamp.
3. 360° uni-directional light with no blind angle.
4. Shock resistant, drop proof casing.
5. Waterproof casing (IP65).
6. CE, RoHS, ERP and UL certified products.
Applications for LED Bulb Light
Replacement bulbs for traditional halogen lamp, such as store, supermarket, especially for museums, art galleries, cosmetic, counters where UV or IR radiation is undesirable.
FAQ:
Why choose LED lighting products from CNBM?
Q: What is the Operating temperature?
A: -20 to +40 degree Celsius
Q.What is the Light efficiency ?
A: Upto 100LM/W
Q:What is the starting time of LED bulb ?
A: Instant
Q:What is the Power Factor of Led Bulb ?
A:0.5 or 0.9
Q:What is the CRI ?
A: we offer CRI 80
Q:What is the beam Angle?
A:180° / 360° beam angle, no dark space
Q:Any Mercury or Radiation or UV ?
A: NO
Q: Are your product IEC satisfied ?
A: YES
Q: How Much Energy It Can Save ?
A:Can save power over 80%
Q: Your Product 100% Real Wattage ?
A: Yes, 100% enough
Q:What is the percentage of replace Incandescent Bulb Light ?
A: 9W can replace 60-75W Incandescent bulb light, 12W replace 100W Incandescent Bulb
Q:Which Kind of hold base you can offer ?
A: E27,E14,B22 and others
Q: How Long of Warranty
A: Minimum 3 years
- Q: The led lamp is necessary to use good
- Home use must be good, cheap will surely regret it
- Q: The difference between the LED lamp
- Applied position Tube light is usually thought to be installed in the ceiling, condole commonly need over 150 mm to pack. Of the canister light, of course, there are external type. In the absence of dome light or droplight installation tube light is a good choice, relative to shoot the light wants downy light. Shoot the lamp to be generally can be divided into orbit type, hanging and embedded, etc. Shoot the light with transformer, but also have without transformer. Embedded within the lamp can be installed in the ceiling. Lamp is mainly used in the need to emphasize or performance. Such as TV wall, hang a picture, accessories, etc., can play the light to enhance effect.
- Q: The led lamp or built-in good external constant current driver
- Built-in like to drive in a work of the oven, the outer is working in normal temperature, which long life are you talking about? But some environment: such as moisture, dust environment, have to consider the external, LED lamp bead every working environment temperature 10 ℃, life will be reduced by half.
- Q: A few questions about LED lights
- 1 power supply voltage must be the same as the load, the power of the output current is larger, can provide the greater the power, the power of the load ability is stronger, so the output voltage of 12 v, the power of the output current of 700 ma can be used for you to shoot the light. Of course, if a larger output current of the power supply can also use just a little too wasted. 2 and 3 for the power supply voltage of 24 v, most likely have to burn the load (leds and circuit component), if want to use, with a voltage divider to be available 24 v down to 12 v. 2 the output current and load is the same, but actually does not reach 350 after partial pressure and loss ma output, so 2 after decompression can not use or scrape can be used. 3 the same supply voltage is too high to buck can use until about 12 v, otherwise it will burn, 700 ma output current can meet the requirements of shoot the light. Summary: the power of the output current must load than old do line, otherwise due to the load is too heavy to burn the power supply, power supply voltage and load the same or close to, can have a little error, but the difference is too large, high voltage too much, may burn load circuit and LED (lamp), is too low, could not move or inefficient work load and the load is not work.
- Q: The original old how long pole to shoot the light to LED lights
- The assembly Electronic transformer is fixed on the original position of lamps and lanterns, two output connecting line respectively with that of the original lamp socket is linked together, good insulation and voltage polarity on the socket, and then do the LED board according to the polarity insert inside the lamp holder, even a good power cord. Check the wiring and correct after insert the 220 v power source, the light, each with 10 v voltage measurement resistance pressure drop, use the formula I = U/R calculated through the current of each group of LED lights, as long as no more than 20 ma.
- Q: Shoot the lamp to use of what brand is good? How much is a led lamp?
- The led must not keen on gaining petty advantages Don't use that I hadn't heard of the name brand or brand than energy-saving lamps are cheaper The short life than incandescent bulbs
- Q: Does the LED light have to be transformer?
- There are two kinds of leds to shoot the light, the 12 v power supply voltage and 220 v power supply voltage. If the power supply voltage is 220 v, without additional transformer, lamp has a built-in transformer.
- Q: Ask high people to instruct the LED light maintenance method
- In power, is the driver of the upstairs said, his bad repair, capacitance is the most common problems, the death of the current if light could be LED will be burn out, the whole lamp should be changed.
- Q: Excuse me how many W LED lamp appropriate gallery
- LED12W I did an auction house's case, is also a gallery. With warm white 12 w, the effect is very good.
- Q: LED to shoot the light flash when open, a period of time is normal
- The LED lamp LED lamp is to use leds as a light source to shoot the light. Traditional lamp used more halogen lamp, luminous efficiency is lower, more power consumption and environment temperature rise by illuminate, service life is short. LED light source on the luminous principle, energy-saving, environmental protection level are much better than traditional lighting lamps and lanterns. And LED the unidirectional formed to shoot the light distribution of the perfect support. LED lamp is mainly composed of shell, light bead, aluminum version of the driver
Send your message to us
LED Spotlight MR16-PL021-2835T3W-12V
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 1000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
