interconnect ribbon 0.23*1.6mm
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 339 ton kg/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
1、基材参数Base Copper Parameter
铜基材Base Material | TU1 oxygen-free C10200 |
成分含量 Content | CU＞99.97% |
导电率 Electrical conductivity | ≥100% IACS |
电阻系数Resistivity | ≤0.017241Ωmm2/m |
2、涂层成分Soldercomposition
涂层成分 Solder Type | 涂层成分比例 Solder composition rate | 单面涂层厚度(mm) Solder Single Thickness(mm) | 涂层厚度公差（mm） Solder Thickness Tolerance(mm) |
含铅 (Leaded) | Sn60%Pb40% | 0.01-0.04 | ±0.005 |
Sn63%Pb37% | 0.01-0.04 | ±0.005 | |
Sn62%Pb36%Ag2% | 0.01-0.04 | ±0.005 | |
无铅(Lead-free) | Sn97%Ag3% | 0.01-0.04 | ±0.005 |
其他成分比例可根据客户工艺要求定制Other solder composition available according to customer’s technical requirement | |||
3、产品几何尺寸及公差Physical Dimension and Tolerance
类别 Type | 厚度范围及公差(mm) Thickness Range and Tolerance(mm) | 宽度范围及公差(mm) Width Range and Tolerance(mm) | 长度及公差（mm） Length Range and Tolerance(mm) |
互联条 Interconnect ribbon | 0.15-0.3 ±0.01 | 1-2.5 ±0.05 | 28-500 ±1 |
汇流条 Bus Bar | 0.2-0.4 ±0.01 | 3-8 ±0.05 | 28-1205 ±1 |
其他尺寸可根据客户工艺要求 Other Dimension available according to customer’s technical requirement | |||
4、Have the best match with cells andwelding machine.Deduct to the broken for cells.
5、Also increases solderability andconductive,this also results in maximum output efficiecy from module。
- Q:Solar energy has some disadvantagesDetailed description of the problem, to help the respondents give accurate answers
- Second, the earth, no matter where there are solar energy, can be developed and used in the field, there is no transport problem, especially for the underdeveloped rural areas, islands and remote areas have more value. Third, solar energy is a clean energy, in the development and utilization, will not produce waste residue, waste water, waste gas, no noise, but will not affect the ecological balance.
- Q:What is the difference between photovoltaic products and solar energy?
- Photovoltaic and solar energy is a concept.Photovoltaic (Solar Power): solar photovoltaic power generation system (Solar power system) for short, is a kind of semiconductor material using solar photovoltaic effect, will be directly converted to a new generation of electric power system with solar radiation, operate independently and grid connected in two ways.
- Q:What about solar products?Solar panels solar panels
- Solar photovoltaic products: photovoltaic modules and photovoltaic components, modules and components of rural production equipment, photovoltaic power generation system, photovoltaic equipment installation and accessories, grid connected photovoltaic system and photovoltaic transmission and distribution equipment; photovoltaic power / battery, charger, controller, inverter, water pump, solar power system equipment, solar energy conversion equipment, fuel cell, silicon solar cell, thin film solar cells, silicon single crystal silicon cell / raw materials, photovoltaic panels, glass cutting machine, testing equipment, various kinds of stove; wind solar diesel battery hybrid power systems, solar desalination system, solar photovoltaic electric vehicles, hydrogen production system, photovoltaic power generation system of computer application software; testing equipment of photovoltaic power generation system.
- Q:What are the functions of the new vehicle negative ion solar charging humidifier?
- A lot of cities have Brown's physical store, go to the store to buy.
- Q:Solar derived products The role of solar panels is to convert solar energy into electrical energy, the output of DC stored in the battery
- Through the analysis of the site we came to the conclusion that the whole system we use wireless bridge hybrid network Winncam wireless bridge 2.4 and 5.8, from point to point and point to multipoint network, set up three level wireless transmission network, which can smooth the audio and video in the network through the front-end equipment; we recommend using infrared network the camera, rear end accept can use a computer, but also can use the DVR DVR to use the decoding function. Finally, we can view and manage the entire system at the back end. The most extensive application of solar energy in the early stage is to heat water, and millions of solar water heaters are now available all over the world. The main components of the solar water heating system include three parts: the collector, the storage device and the circulating pipeline. In addition, there may be auxiliary energy device (such as electric heaters, etc.) used to supply without sunshine, in addition still may have forced circulation with water, with water level control device or control electric parts or temperature and received loads of pipeline etc.. According to the cycle of solar water heating system can be divided into two kinds:
- Q:How much does it cost to install solar energy in rural areas
- Two see insulation performance. The storage tank is a hot water storage tank, and its performance is mainly reflected in the insulation effect. Good insulation not only depends on the thickness of the insulation layer, but also insulation materials and processes. The use of automatic numerical control constant temperature and constant pressure quantitative foam, high temperature curing, thickening insulation layer of the water storage tank to ensure that the layer is more compact symmetry, thermal insulation performance is more durable.Three see bearing strength. Like the solar stent skeleton, of course not fragile. At present, there is a more streamlined tower support, which uses reinforced, super high base, to overcome the traditional thin rod bracket thin wind resistance of the problem, wind, rain, hail, corrosion resistance.
- Q:30MW solar thermal power plant total investment
- The most expensive. Amorphous silicon solar cell conversion efficiency is the lowest, but the cheapest price, the most promising in the future will be used for general battery. Once a large area of the component photoelectric conversion efficiency of 10%, the price per watt power generation equipment down to $1 - $2, it is enough to compete with the current mode of power generation.
- Q:Now there is no sun, cloudy days can use solar products?
- At present, I have not found this kind of solar energy
- Q:What are the disadvantages of traditional solar water heater
- Because the water does not go glass tube, glass tube without fouling, the winter is not. The water heater can be pressurized, installed on the third floor, the first floor can also be used. If the water heater on the ground, the two floor, the third floor can also be used. So even if the existing architectural design is not perfect, the installation of solar energy, but also can be coordinated. At the same time, the electric water heater liner technology can also be used, so that the pressure bearing capacity of solar energy reached 6-10Kg.
- Q:What are the references of the solar automatic tracking system
- Using solar automatic tracking in the photovoltaic power generation system, can effectively improve the utilization of solar energy. Therefore, the research in this paper to improve the efficiency of photovoltaic power generation, has important significance to promote the popularization and application of photovoltaic power generation. This paper proposes a photoelectric tracking mode and solar tracking combined all-weather solar the automatic tracking method. Analyzed and sunny, cloudy and rainy weather condition three
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
interconnect ribbon 0.23*1.6mm
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 339 ton kg/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
