Home Depot Plywood 1 2 Engineered Veneer Unreal Color Wood for Door Skins and Plywood
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of Engineered Veneer Wood:
Engineered Veneer Unreal Color Wood for Door Skins and Plywood
1.Thickness:0.3mm-0.6mm
2.Grade:furniture,door and panel grade
Specification of Engineered Veneer Wood:
(1)Regular Size: Width640mm*Thickness 0.30-0.6mm *Length 2500mm
(2)Application: Can be used in interior decoration,furniture and music equipments , plywood or MDF , door etc
(3)MOQ: 500m2
(4)Packing:Wood pallet covered with plastic and fixed by iron belt
(5)Terms of payment: TT, LC at sight
(6)Delivery date:within 7—10 days after order confirmed. Your special order is also welcome
Other Information of Engineered Veneer Wood:
Dimension | 2 x 8 feet/2.5mx64cm
| |
Thickness | 0.5mm/0.3mm | |
Grain | quarter cut/crown cut | |
Grade | Good quality | |
Moisture | To be 8%-10% at time of shipment. | |
Quality | Clear grain, uniformity color, no chew silk, no any defect | |
Usage | High grade Furniture, Restaurant and hotel decoration. Decoration board. Be pasted on MDF, Plywood. Other wood product, ect. | |
Package | Wooden pallet packing | |
Quanity fits in container | 20’GP | 35000m2 |
40’GP | 65000m2 | |
40’HQ | 75000m2 | |
MOQ | No requirements or can place a sample order to test our quality. | |
Delivery time | 5-15 days on receipt of deposit. | |
Price terms | EXW, FOB, CIF, CNF. | |
Payment terms | By T/T, 30% for depoait and 70% is paid before shipment or after goods' inspection | |
Process of Engineered Veneer Wood:
Log Selection
EV is generally produced from Chinese Poplar logs, grown locally either by local co-operatives,
or in registered plantation areas. The light natural colour and soft grain definition of Poplar makes it wellsuited to the production of EV. The process of converting timber into EV starts with the selection of logs, following which they are bought to the mill for processing. The timber is trimmed, sawn to length and debarked. The logs are now ready to be peeled.
Peeling of the Logs
The logs are mounted onto a giant lathe. Within minutes the logs are peeled into rotary veneers. This is achieved by pressing a rotating log towards a large blade, thinly peeling a continuous sheet of veneer off the log. The veneer is dried, stacked and then graded. It is now ready to be dyed.
Drying
EV veneers can be dryed to a consistent colour to suit the market requirement. The raw veneer leaves are stacked into a stainless steel cage. Once completely loaded, the stainless steel cage is immersed into a pressurized, heated vat that is filled with water soluble dry. This system ensures that each leaf is given the correct amount of time to allow the dry to completely penetrate each individual leaf of veneer. Once the desired colour has been achieved, the leaves are unloaded from the vat, dried and given a final inspection before going to the gluing stage.
Gluing
The gluing process is critical for the performance of the finished product. A layer of glue goes between each leaf of veneer, to bond the leave of veneer together. Once the stack has been laid up it is then put into a high pressure press to bond the leaves together, creating a large rectangular block.
Slicing of the Block
The block in now ready to be sliced into veneer leaves. Once the block has been produced, it is turned through 90 degrees, to present the end grain, then mounted to the slicing unit. The blade now runs across the end grain of the block, slicing thickness controlled leaves of veneer. The veneer leaves that are produced are approximately 0.4mm thick, and in 2440 x 1220 format. The veneer is now ready to be used as face veneer for Eucalyptus and Poplar core plywood products.
Packing of Engineered Veneer Wood:
- Q: How do you choose plywood in plywood production?
- Several kinds of said in the "veneer", "slices", "veneer" are reflected in the "plaque" the basic characteristics. But can not be cedar plywood, ash willow plywood and other abbreviations, because these referred to as refers to the plywood panel, the floor by the cedar or Ash made.
- Q: Plywood is a common material for furniture?
- Commonly used plywood type plywood, penta and so on. Plywood can improve timber utilization and is a major way to save wood
- Q: What harm does the plywood factory work?
- Plywood using adhesives, containing benzene, toluene, xylene and other solvents, with the corresponding occupational hazards
- Q: A brief introduction to plywood
- With the veneer after the wood by the direction of the criss-cross the composition of the slab, heated or not heated under the conditions of suppression.
- Q: Ordinary plywood is divided into four categories
- According to different density, divided into 80, 70, 60 three categories. Quality level for the premium, one, two three
- Q: Hard fiber board is also a density board
- the same texture direction. Adjacent two-layer veneer grain direction should be the same. The plywood should be the same tree.
- Q: Today, most of the furniture is made of wood, pine, bakelite and popla
- . At that time, high-quality furniture, timber supply is sufficient, those who are not beautiful or poor durability of wood used only for non-exposed parts of furniture.
- Q: Why is the plywood commonly used in the singular layer
- and the back of the stripes) from the beautiful and do not look good
- Q: Solid wood and plywood which is better?
- the difference between selection: multi-layer solid wood flooring due to take into account the different species of "alternative heterosexual", so that the production process can fully balance the "internal stress"
- Q: What are the types of veneer veneer veneer?
- according to the decorative veneer texture can be divided into radial decorative veneer veneer plywood chord decorative veneer veneer plywood
Send your message to us
Home Depot Plywood 1 2 Engineered Veneer Unreal Color Wood for Door Skins and Plywood
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
