High Quality Engineered Veneer Wood Ground Contact Plywood for Door Skins
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of Engineered Veneer Wood:
Engineered Veneer Unreal Color Wood for Door Skins and Plywood
1.Thickness:0.3mm-0.6mm
2.Grade:furniture,door and panel grade
Specification of Engineered Veneer Wood:
(1)Regular Size: Width640mm*Thickness 0.30-0.6mm *Length 2500mm
(2)Application: Can be used in interior decoration,furniture and music equipments , plywood or MDF , door etc
(3)MOQ: 500m2
(4)Packing:Wood pallet covered with plastic and fixed by iron belt
(5)Terms of payment: TT, LC at sight
(6)Delivery date:within 7—10 days after order confirmed. Your special order is also welcome
Other Information of Engineered Veneer Wood:
Dimension | 2 x 8 feet/2.5mx64cm
| |
Thickness | 0.5mm/0.3mm | |
Grain | quarter cut/crown cut | |
Grade | Good quality | |
Moisture | To be 8%-10% at time of shipment. | |
Quality | Clear grain, uniformity color, no chew silk, no any defect | |
Usage | High grade Furniture, Restaurant and hotel decoration. Decoration board. Be pasted on MDF, Plywood. Other wood product, ect. | |
Package | Wooden pallet packing | |
Quanity fits in container | 20’GP | 35000m2 |
40’GP | 65000m2 | |
40’HQ | 75000m2 | |
MOQ | No requirements or can place a sample order to test our quality. | |
Delivery time | 5-15 days on receipt of deposit. | |
Price terms | EXW, FOB, CIF, CNF. | |
Payment terms | By T/T, 30% for depoait and 70% is paid before shipment or after goods' inspection | |
Process of Engineered Veneer Wood:
Log Selection
EV is generally produced from Chinese Poplar logs, grown locally either by local co-operatives,
or in registered plantation areas. The light natural colour and soft grain definition of Poplar makes it wellsuited to the production of EV. The process of converting timber into EV starts with the selection of logs, following which they are bought to the mill for processing. The timber is trimmed, sawn to length and debarked. The logs are now ready to be peeled.
Peeling of the Logs
The logs are mounted onto a giant lathe. Within minutes the logs are peeled into rotary veneers. This is achieved by pressing a rotating log towards a large blade, thinly peeling a continuous sheet of veneer off the log. The veneer is dried, stacked and then graded. It is now ready to be dyed.
Drying
EV veneers can be dryed to a consistent colour to suit the market requirement. The raw veneer leaves are stacked into a stainless steel cage. Once completely loaded, the stainless steel cage is immersed into a pressurized, heated vat that is filled with water soluble dry. This system ensures that each leaf is given the correct amount of time to allow the dry to completely penetrate each individual leaf of veneer. Once the desired colour has been achieved, the leaves are unloaded from the vat, dried and given a final inspection before going to the gluing stage.
Gluing
The gluing process is critical for the performance of the finished product. A layer of glue goes between each leaf of veneer, to bond the leave of veneer together. Once the stack has been laid up it is then put into a high pressure press to bond the leaves together, creating a large rectangular block.
Slicing of the Block
The block in now ready to be sliced into veneer leaves. Once the block has been produced, it is turned through 90 degrees, to present the end grain, then mounted to the slicing unit. The blade now runs across the end grain of the block, slicing thickness controlled leaves of veneer. The veneer leaves that are produced are approximately 0.4mm thick, and in 2440 x 1220 format. The veneer is now ready to be used as face veneer for Eucalyptus and Poplar core plywood products.
Packing of Engineered Veneer Wood:
- Q: Plywood in the material defects?
- resin leakage (resin) resin streak trees after the local injury, the resin gathered in a large number of them and through the surrounding wood and the formation of color than the surrounding normal wood deep
- Q: What does plywood mean and its synthesis?
- Plywood is cut from the wood section into a veneer or cut from the wooden square cut into thin wood, and then made of adhesive glue from the three or more layers of plate-like material
- Q: Four levels: Principal, First, Second, Third. Commonly used for one, two, three and so on
- partition panel, the board formed by drilling a variety of patterns, the surface spraying a variety of coatings, decorative effect is better
- Q: How is the current market outlook for plywood?
- Although China plywood has developed rapidly, but still encounter the EU and other importing countries of the anti-dumping complaints
- Q: Wood board, plywood, MDF What is the difference
- Can be single-sided sanding, double-sided sanding or both sides are not sanding.
- Q: What is the use of plywood for construction?
- The outermost front panel is called a panel, the back is called a backplane, and the inner board is called a core plate
- Q: The density of the plywood is greater than that of the same kind of wood
- The greater the unit pressure when gluing, the greater the density of the plywood. As the wood at high temperature easy to produce plastic deformation, hot glue gluing than the compression of the compression rate is greater.
- Q: Plywood in the decoration works how to use
- A group of veneers are usually in the direction of adjacent layers of wood grain perpendicular to the formation of each other, usually its table and the inner plate symmetrically arranged in the center layer or plate on both sides.
- Q: The usual length and width specifications are:
- 1220 × 2440mm, while the thickness specifications are generally: 3,5,9,12,15,18 mm and so on.
- Q: What are the types of veneer veneer veneer?
- according to the decorative veneer texture can be divided into radial decorative veneer veneer plywood chord decorative veneer veneer plywood
Send your message to us
High Quality Engineered Veneer Wood Ground Contact Plywood for Door Skins
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
