High Efficent Small 4.5T Forklift Truck with Good Price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 500 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Name: High Efficent Small 4.5T Forklift Truck with Good Price
1. Specification
GENERAL INTRODUCTION | 1 | MODEL |
| FD40B-W1 | ||
2 | POWER TYPE |
| DIESEL | |||
3 | RATED CAPACITY | kg | 4500 | |||
4 | LOAD CENTRE | mm | 500 | |||
CHARACTERISTIC AND DIAMENSION | 5 | LIFT HEIGHT | mm | 4500 | ||
6 | FORK SIZE | L×W×T | mm | 1070×125×50 | ||
7 | MAST TILT ANGLE | F/R | Deg | 6°/12° | ||
8 | FRONT OVERHANG（Wheel center to fork face） | mm | 487 | |||
9 | GROUND CLEARANCE | mm | 140 | |||
10 | OVERALLDIMENSION | OVERALL LENGTH（Without fork） | mm | 2460 | ||
11 | OVERALL WIDTH | mm | 1150 | |||
12 | MAST LOWERED HEIGHT | mm | 1985 | |||
13 | MAST EXTENDED HEIGHT （With Backrest） | mm | 4030 | |||
14 | Overhead Guard Height | mm | 2070 | |||
15 | TURNING RADIUS (outside) | mm | 2170 | |||
PERFORMANCE | 16 | Speed | TRAVEL（Full load） | km/h | 19 | |
17 | LIFTING （Full load） | mm/s | 490 | |||
18 | MAX. GRADEABILITY | % | 20 | |||
FRAME | 19 | TIRE | FRONT | 7.00-12-12PR | ||
20 | REAR | 6.00-9-10PR | ||||
21 | WHEELBASE | mm | 1600 | |||
22 | SERVICE WEIGHT | kg | 3350 | |||
POWER AND TRANSMISSION | 23 | BATTERY | VOLTAGE/CAPACITY | V/Ah | 12/90 | |
ENGINE | ||||||
25 | MAUFACTURE |
| ISUZU C240 | |||
26 | RATED OUTPUT/R.P.M | kw/rpm | 37/2650 | |||
27 | RATED TORQUE/R.P.M | N·m/rpm | 148/1800-1900 | |||
28 | NO.of CYLINDER |
| 4 | |||
29 | BORE×STROKE | mm | 90×105 | |||
30 | DISPLACEMENT | cc | 2540 | |||
31 | FUEL TEAK CAPACITY | L | 60 | |||
32 | GEARBOX | TYPE | ELECTRICAL SHIFT/MANUAL SHIFT | |||
33 | STAGE | F/R | 1/1(2/2) | |||
2. Application
For Transporting Goods
3. Package
Put into containers.
FAQ:
Q1: Why buy Materials & Equipment from OKorder.com?
A1: All products have its ISO certifications, adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce some 4.5T Forklift Truck according to customers request?
A4: Yes, we can produce 4.5T Forklift Truck according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5:We have overseas branches all-around of world, If needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities &skilled personnel at site for training.
- Q: How does the fork of a forklift know that there is no balance
- Heavy load balance: is a problem distortion for the test fork or not. The payload is placed in the middle of the cargo fork. Stop at a few centimetres from the ground (for safety) to measure or measure. The fork tip is separated from the ground. Can be measured.
- Q: What is the tonnage of a few tons of forklifts?
- There are more than 10 tons of forklifts in the harbor, as well as the container size forklift. The standard forklift truck is usually one ton, two tons and three tons. Special choice in addition to the standard forklifts, forklift with a container for container operations, points into the tank container forklift forklift (2 ~ 5 t), the empty container stacking forklift (7 ~ 10 t) and a tank full of loading and unloading container forklift (20 ~ 42 (t). Each rating of the forklift truck crane quality refers to the cargo weight within the standard load center distance forklift, forklift truck door frame, vertical lifting by forklift standard lifting height (hoisting height provisions in China standard is 3000 mm) when lifting the quality of the goods. User when choosing forklift tonnage, therefore, should be based on the center of gravity of the loading and unloading goods compared with the size of the forklift truck standard load center, such as cargo center of gravity is equal to or less than the standard forklift load center distance, is the selected forklift lifting quality rating equal to or higher than the goods quality. If the center of mass of the cargo is greater than the standard load center of the forklift truck, the loading curve of the forklift truck will be determined according to the loading curve of the forklift truck.
- Q: How many kilograms are on the top of the forklift truck
- First of all, this depends on what brand, what specification forklift truck! Different brand of forklift with car body materials, basic is iron, second-line brand premium brands is the basic of steel, the steel quality will also because of the forklift truck manufacturers selected steel sites, brands are different.
- Q: Battery lift truck charging requirement
- Charge note Do not unplug or turn off the power switch when charging, otherwise the plug and the electrical component will be damaged. When the charging authority is closed, the plug is removed. The truck. When configuring the electrolyte, do not pour water into sulfuric acid, lest the temperature of the liquid surface suddenly rise, and the boiling acid droplets will hurl
- Q: What are some of the common failures of forklifts?
- First, if the generator is normal, if the generator is normal then it is the problem of the battery. The most stupid way to measure the virtual voltage of a direct battery is to charge the battery with a charger, and if it can't be plugged directly, the battery will be dead. Change generators or batteries. When you turn on the key switch, you turn on the key switch and start clicking. Change the starter 3, if the key switch is bad, start with a little bit of reaction fluid. In the key switch 4, the oil pump is not supplied with oil and this needs to be removed and sprayed. In exchange for oil pump or repair. There is no oil in the tank. Come on! There is no oil measuring tape. Add oil! 7 and 8, twist the key switch, and the motivation is normal, but you can't afford a car, or get up and stall. Repair engine!
- Q: After the forklift is killed, it will stall!
- Any mechanical direction killing will cause damage to the direction system! You're holding the engine out!
- Q: Is the stack a forklift truck
- It isn't. Stacking machines and forklifts are two things. Stacking vehicles refer to a variety of wheeled transports that handle loading, loading, stacking, and short-range transportation. International standardization organization ISO/TC110 is called an industrial vehicle. The structure is simple, the control is flexible, the micro motion is good, the explosion safety performance is high. Suitable for the narrow channel and limited space, it is the ideal equipment for the warehouse, workshop and unloading tray. Can be widely used in petroleum, chemical, pharmaceutical, textile, military industry, paint, paint, coal industry, and the port, railway, freight yard, warehouse, etc. The sites with explosive mixture, and can be tray into the cabin, car, and the container loading and unloading, stacking and handling of the goods.
- Q: Special equipment, the type of vehicle for forklift licence and corresponding driving vehicle
- The N2 forklift card can drive a forklift: 1, there is no limit to the type of driving car, and the tonnage can be opened. 2, short for "motor vehicle driving license", and "driving licence", in accordance with the law personnel required for motor vehicle driving licenses, previously known as forklift driver, now change to code, forklift driver code is N2. 3. The forklift driving is special operations, issued by the state production safety supervision and administration of the People's Republic of China special operations card ", forklift, generally are tools, only used in the unit within the work place. So generally speaking, you only need a position certificate or a license, but the average unit will ask for a driver's license.
- Q: What do you mean by the center spacing of the load on an electric forklift?
- Load center distance In short, it means the center of gravity of the cargo. For example, the length of the fork is one meter, and the center of the load is half a meter away. In turn, the 1.8-meter-long cargo fork, the center of the payload is 0.9 meters away. It is dangerous to use a one-meter fork fork, which is 1.8 meters long, and the center of mass of the cargo is at 0.9 meters. It's likely to fall!
- Q: What is the meaning of a forklift?
- Gasoline cars, gas bottles like gas, gas forklifts Compared to diesel cars, petrol cars save energy, burn more, and, of course, emit more environmental protection. In short, it's the greenest and most environmentally friendly of the internal combustion forklifts. The price is more expensive!
Send your message to us
High Efficent Small 4.5T Forklift Truck with Good Price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 500 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
