Graphite Electrode India - G Grade Carbon Electrode 750-960 CNBM Silicon Production

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

Graphite electrode
-Low S,ash,resistance
-High anti-oxidation
-30000 tpa.output
-Free payment terms

Usage

Used for steel making in arc furnace
Dia:200mm-1200mm

Packaging Detai	WOODEN CRATES
Delivery Detail:	BASE ON THE QUANTITY OF ORDER

Specifications

	Regular Power (RP)	High Power (HP)	Ultral High Power (UHP)
Graphite Electrodes	Graphite Electrodes	Graphite Electrodes	Graphite Electrodes
Bulk Density	≥ 1.55g/cc	≥ 1.65g/cc	≥ 1.68g/cc
Specific Resistivity	≤8.0µΩ.m	≤ 6.8µΩ.m	≤ 5.8 µΩ.m
Flexural Strength	≥ 10.0MPa	≥ 11.0MPa	≥ 12.0MPa
Elastic Modulus	≤10.0GPa	≤12.0GPa	≤14.0GPa
Co-efficient of Thermal Expansion	≤ 2.4 x 10-6/°C	≤ 2.2 x 10-6/°C	≤ 1.9 x 10-6/°C
Ash	≤ 0.5%	≤ 0.3%	≤ 0.3%
Nipples	Nipples	Nipples	Nipples
Bulk Density	≥ 1.65g/cc	≥ 1.72g/cc	≥ 1.75g/cc
Specific Resistivity	≤ 6.5µΩ.m	≤ 5.5µΩ.m	≤ 4.5 µΩ.m
Flexural Strength	≥ 12.0MPa	≥ 14.0MPa	≥ 16.0MPa
Elastic Modulus	≤12.0GPa	≤16.0GPa	≤18.0GPa
Co-efficient of Thermal Expansion	≤ 2.0 x 10-6/°C	≤ 1.8 x 10-6/°C	≤ 1.4 x 10-6/°C
Ash	≤ 0.5%	≤ 0.3%	≤ 0.3%

G Grade Carbon Electrode 750-960 CNBM Silicon Production

Q: What are the structures of pyrolytic graphite electrodes? What are their properties and applications? We hope that some details will not be found: The high purity graphite component is put into the furnace, and nitrogen and methane are produced under vacuum high temperature. Then graphite is shown to produce 10% coating.

Q: Why should graphite paper be placed between the heater and the graphite electrode?: . Different single crystal furnace heaters may be of the same size or may be different. The heater is determined according to the size of the Czochralski single crystal furnace and the parameters of the drawn single crystal, and is generally designed in the form of a parallel circuit, and the following parameters. A heater, the heater, the shape of two inner diameters of three, four, the effective length of the heater heater, the heater piece is five thickness and gives the heater diameter. These parameters are determined according to Czochralski single-crystal furnace parameters and its crystal diameter. The power transformer parameters are mainly based on the single crystal furnace heating power: maximum output power, maximum output voltage and maximum output current, diameter and height of the crucible. The design of the heater has the following steps: 1. Selecting and determining the shape of the heater; the heater is made of high purity graphite; the resistivity of the high purity graphite; the heater is usually made into a cylinder at present.

Q: What's the purpose of the electrode material?When the electrolytic molten state of NaCl is said, what is the use of the graphite electrode and the iron electrode?: 1. graphite (two kinds of EDM3 and EDM200)2. copperIn general, graphite electrode for extensive escape material (graphite texture loose, discharge energy is relatively large, removal of materials faster, but face flowers that roughness is relatively large

Q: Why is the production of one ton of ultra high power graphite electrode requires 1.05 tons of coke?: Petroleum coke is divided into needle coke and sponge coke and projectile reef, fixed carbon content components of petroleum coke is around 80%

Q: How much does a graphite electrode cost about a ton?: And different sizes of prices also change, you simply say you use the environment, that is used in where? And how to use it to tell you the price

Q: What are the losses in graphite electrode?: In EDM, discharge principle is to remove the workpiece material by using the tool and the workpiece anode spark discharge explosion, spark discharge is bidirectional, not only will the workpiece removal part, forming processing, will cause some loss of electrode. Electrode loss is one of the main causes of machining errors in machining, and is an important technical parameter affecting the accuracy and quality of EDM

Q: How can the graphite powder be processed into high quality carburizing agent? Thank you: So that impurities on the high, so basically can not be processed into so-called quality, and can leave a contact, discuss each other

Q: What are the factors that affect the electrode wear rate of machine tools?: Effect of processing voltage on electrode wear. The processing voltage is the average voltage between the discharge time and the gap. When the voltage is lower than the power supply voltage (voltage) 25%, electrode loss will increase, which is due to the electrode and the workpiece is too close, the discharge column energy is too large, the electrodes generate heat radiation is too strong, at the same time, there are a large number of continuous arc discharge. But the working voltage is too high (partial load processing), bad conditions of thermal effect in the gap, is not conducive to the adsorption of copper electrode of carbon graphite, destroy the covering effect. Similarly, the electrode loss increase, therefore, corresponding to different processing standards should be selected to adjust the discharging gap voltage.

Q: What kinds of carbon are there?: The carbon block can be divided into blast furnace carbon block, aluminum carbon block and electric furnace block. Carbon products can be divided into carbon products, graphite products, carbon fibers and graphite fibers according to the depth of processing. Carbon products can be divided into graphite products, carbon products, carbon fibers and special graphite products according to the raw materials and the production process. Carbon products according to their ash content, and can be divided into multi gray products and less ash products (including ash below l%).

Q: How can I electroplate iron? I would like to use graphite as an electrode. Iron is plated on graphite with iron solution, so it can be processed into iron parts. I wonder if it can be done: Iron plating can be, with 2 valence iron, but on the graphite joint force is good, it is difficult to say, electroplating is bad, peeling is also common. Relatively speaking, iron parts on nickel plating is relatively simple, also more applicable

Send your message to us

*Email

*TEL

*Quantity

*Unit