Forklift 1.3T Mini Electric Pallet Truck
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Model | CBD13 | CBD20 | CBD20 | |
Configuration No. | 610 | 460 | 150 | |
Power type | Electric | |||
Operator type | Walkie | Rider | Walkie | |
Load capacity | Q(kg) | 1300 | 2000 | |
Load centre | c(mm) | 600 | ||
Wheel base | y(mm) | 1234 | 1460 | 1390 |
Overall height(with control handle) | h14(mm) | 1220 | 1455 | 1385 |
Overall length(without pedal) | l1(mm) | 1630 | 1910/1960 | 1750/1800 |
Rear length | l2(mm) | 500 | 760 | 600 |
Overall width | b1(mm) | 724 | 790 | 720 |
Lifting height | h3(mm) | 120 | 110 | |
Ground clearance +fork thickness | h13(mm) | 74/85 | 85 | |
Minimum turning radius | mm | 1400 | 1465/2140 | 1575 |
Maximum traveling speed | km/h | 3.5/4 | 6/6 | 4.5/4.5 |
Service weight( with battery ) | kg | 854 | 612 |
- Q: How many decibels is the sound of a battery forklift? Is it noise? How much does it have to do with neural tinnitus in this environment?
- Electric forklifts are less noisy, less than 70 decibels for foreign brands, not noise The domestic is larger, it is 75 to 80 decibels, the diesel car has more than 80 decibels
- Q: How to solve the oil spill?
- Internal leakage: It is common to cause the hydraulic cylinder of forklift truck to rise or fail to rise, and the fork of the fork falls on its own. The reasons for the leakage and the elimination method: (1) there is too much friction between the stem and the valve body The wear of the stem and body is accelerated due to the long-term use of the dispensing valve and the non-cleaning of the oil, which destroys the sealing surface of the valve and causes the leakage of oil. If the valve stem is worn lighter, it can be polished to the stem plate. If the stem is worn badly, it needs to be replaced (2) oil leakage between the body Failure of sealing ring to produce internal leakage; The valve body is damaged or damaged when installed, and it is easy to leak between the body when the oil pressure is applied. If the body damage is done, it is necessary to grind, replace the o-ring, and tighten the bolts in order and torque
- Q: Diesel forklifts generally take a long time to replace the oil
- For the first time in the period suggested 50 hours to do the first oil change And with better oil level is above the CD, if you use the bad environment, see the purity of the oil, without a viscous dark or replaced. After the mill period, change every 200 hours. Basically 200 hours, the best method is to look at oil
- Q: The width of the forklift truck aisle should be left over.
- Linde R14 forklift rectangular storage radius, for example, 800 * 1200 along the fork, if the width is 2455 tray security extended length of 75 mm, so both sides is 150 mm, the minimum width of roadway is 2605 mm, width of general design in more than 2800.
- Q: Notice those items before the forklift
- Forklift yearly check just need certification, then the body on the nameplate on, can clearly see that the above information such as the factory number, if not the first time a yearly check, just the last annual inspection report, but your forklift every performance must be in good condition.
- Q: Electric forklifts can be used for a long time
- Look at the use case, look at work environment, look at worker's labor attitude, average about a year and a half.
- Q: Does the forklift have only one wheel? Front engine
- They say there is nothing wrong, if you can walk in a day can only two feet from the distance, so your life can only walk on a straight line, this is the principle of differential, there must be slow to shift! The tire case about who knows how to skate! And you don't have the right place to work. Top wave back! It is. Or a forklift truck
- Q: Why is the front wheel of the forklift narrow
- The rear wheel is smaller, so the needed floor area is smaller and the radius becomes smaller, making the shift more flexible.
- Q: What the forklift needs to be aware of...
- No more than 30km/h when driving a forklift in the main road of the factory, no other road should exceed 20km/h. Keep a certain distance from the vehicle in front of you, and when you go forward, you should send a signal to pedestrians or vehicles. The speed of the driving forklift should be slow and steady while unloading, and notice that the wheel should not be crushed by any other object, such as cushioning, etc. After unloading the cargo, you should land the cargo fork to the normal driving position before moving again.
- Q: The forklift in the factory is a special equipment
- Forklift truck is an industrial transport vehicle, which is a variety of wheeled transport vehicles for loading and unloading, stacking and short-range transportation. The forklift is a kind of special equipment management.
Send your message to us
Forklift 1.3T Mini Electric Pallet Truck
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches