Exterior Plywood Bintangor Face Commercial Plywoo for Furniture and Packing
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 10000 m³/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
1.face/back:bintangor/okoume/pencil cedar and other hardwood
2. poplar or hardwood or finger joint as core
3.1220x2440x5-18mm
3.grade:BB/CC
4.glue:MR/E2
Commercial Plywood
core | poplar,hardwood,combi,eucalyptus,etc |
face/back | okoume,bintangor,keruinging,poplar,pine,melamine paper etc |
grade | bbcc grade |
glue | MR, E2, |
moisture | 12-16% |
size | 1220mm*2440mm&1250mm*2500mm or as your demand |
tolerance | ≤6mm:0.3mm; ≥6mm:0.5mm |
pressed | two time hot press |
size | 1220*2440/ 1220*1830/ 910*1830/ 910*2130 |
usage | furniture/wooden pallets,plywood boxes,etc |
packing | pallet packing |
payment | T/T,L/C at sight |
delivery time | within 15 days after receiving deposit |
FAQ:
1. samples are available
2. discount is allowed for big orders
3. welcome to our factory for a visit at anytime
FEATURES:
1.It can be put in cold water for 5 days with no damage
2.Wear-resistant,anti-cracking,anti-acid and alkaline-resistant
4.Tight construction and high strengt
5.No ratten or decay
6.Low formaldehyde emission
7.The productions are suitable for the construction of viaduct and tall frame building
- Q: What is the general use of plywood in decoration works?
- Plywood is cut from the wood section into a veneer or cut from the wooden square cut into thin wood, and then made of adhesive glue from the three or more layers of plate-like material
- Q: Plywood is a common material for furniture?
- Commonly used plywood type plywood, penta and so on. Plywood can improve timber utilization and is a major way to save wood
- Q: The Decorative veneer veneer plywood grade classification
- for example,such as some manufacturers logo level "AAA", which is corporate behavior.
- Q: What are the processing defects of plywood?
- Edge defects at the edges of the panel due to sanding, sawing or collision caused by the corner defects.
- Q: The density of the plywood is greater than that of the same kind of wood
- As the plywood from the criss-cross the preparation of the veneer, the thermal conductivity is lower than the same species of wood
- Q: What are the key points for plywood selection?
- if you do not consider the panel pattern and color, should also be based on the environment and reasonable cost Selection of plywood grade, category
- Q: What is a joinery board?
- Blockboard thickness specifications for the 16,19,22,25 mm quality grade is divided into one, two, three three levels
- Q: Class III resistant tide plywood class IV tonic resistant plywood
- Mild wood veneer: with Ash, willow wood, color wood, birch and other peeling into 0.1-0.5mm thick sheet, plywood as a substrate made of glued, its beautiful pattern, good decorative
- Q: Does plywood contain formaldehyde?
- 12 cm plywood is usually 3-4 layers of natural wood chips "glue" together, each layer of double-sided roller plastic hot forming, the whole board about 3 kg of glue
- Q: The usual length and width specifications are:
- Solid wood refers to pure solid wood, that is, all materials are not re-processed natural materials, do not use any furniture made of wood furniture.
Send your message to us
Exterior Plywood Bintangor Face Commercial Plywoo for Furniture and Packing
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 10000 m³/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords