Evacuated Tube Solar Collectors Price 2024 New Design Heat Pipe Solar Water Heater System
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Non-Pressure Solar Water Heater:
Non-pressure Solar Heater is one of the most economical solar water heating device with pretty high efficiency at the same time. It consists of hot water storage tank, solar vacuum tubes with mouth plug in storage tank, and bracket supporting tank and tubes.When cold water in evacuated tubes is heated with solar irradiation, as the specific gravities of hot water and cold water are different, hotter water goes upward to storage tank and colder water goes downward to glass tubes. through this continuous circulation, the cold water in storage tank will be gradually heated till sunset.
Specialty:
1. High thermal performance and working temperature: the heat exchanging rate even in winter can up above 55%.
2. Heat collecting efficiency is at least 20% above common solar systems.
3. Work in all day and all season: no matter any corner of the world, this system can work well even -40℃ to avoid the tube freezing problem.
4. Reliability: No water following through the tube, so water scale can not generate and tube cracks could be avoided, the system still can keep working even with some damaged tubes.
5. It can connect with water tap and work automatically with pressure0.6Mpa, bring enjoyable washing experience.
6. Safety: P/T valve would release pressure and temperature to protect tank..
Technical Specification:
1. Outer tank material: SUS304 stainless steel or powder coated color steel
2. Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
3. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
4. Frame material: 1.2mm thickness stainless steel
5. Insulation material: 55mm thickness polyurethane
6. Suitable for mains pressure water(up to 8 bar/116psi)
7. Easy plug-in installation
8. Install the T/P valve on the pressurized tank
9. Seal material: Stabilized High Temperature Silicon
Outer tank material: SUS304 stainless steel or powder coated color steel
Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
Frame material: 1.2mm thickness stainless steel
Insulation material: 55mm thickness polyurethane
Suitable for mains pressure water(up to 8 bar/116psi)
Easy plug-in installation
Install the T/P valve on the pressurized tank
Seal material: Stabilized High Temperature Silicon
19. Vacuum Tube | 20. Size (mm) | 21. Φ47*1500 / Φ58*1800 / Φ70*2100 | |||||
22. Tube (pcs) | 23. 10 / 12 / 15 / 18 / 20 / 22 / 24 / 30 / 36 / 42 | ||||||
24. Material | 25. Borosilicate 3.3 glass, magnetron spluttering selective coating | ||||||
26. Coating | 27. Single-target AL-N/AL or Three-target AL/N-Cu-SS | ||||||
28. Water Tank | 29. Capacity | 30. 80L ~ 500L for hot water storage tank | |||||
31. Inner tank | 32. Food-grade stainless steel SUS304-2B / SUS316 | ||||||
33. Insulation | 34. High-density polyurethane foam with 70~80 hour heat preservation | ||||||
35. Tank shell | 36. Food-grade stainless steel SUS304-2B | ||||||
37. Bracket | 38. Shaped strong aluminum alloy structure adaptable for flat or slope roof | ||||||
39. Accessories | 40. Anti-aging silicon seals, Dustproof seals, Air-vent cap, Stainless screws | ||||||
41. Auxiliary Devices | 42. Assistant tank, Intelligent controller, Electrical heater, Magnesium anodes | ||||||
43. Tilt Angle | 44. 25 ~ 50° | ||||||
45. Water Output | 46. 45 - 95°C | ||||||
47. Hail Resistance | 48. Φ25mm diameter | ||||||
49. Model Number | 50. Solar Vacuum Tube | 51. Tank 52. Liter | 53. System 54. Liter | 55. Container Loading Qty /sets | |||
56. Size /mm | 57. Qty /pcs | 58. 20GP | 59. 40GP | 60. 40HQ | |||
61. VNS-58SA12-100 | 62. Φ58*1800 | 63. 12 | 64. 100 | 65. 132 | 66. 58 | 67. 119 | 68. 140 |
69. VNS-58SA15-130 | 70. 15 | 71. 130 | 72. 170 | 73. 54 | 74. 108 | 75. 131 | |
76. VNS-58SA18-150 | 77. 18 | 78. 150 | 79. 198 | 80. 43 | 81. 86 | 82. 105 | |
83. VNS-58SA20-170 | 84. 20 | 85. 170 | 86. 223 | 87. 40 | 88. 80 | 89. 97 | |
VNS-58SA24-200 | 24 | 200 | 263 | 35 | 70 | 85 | |
VNS-58SA30-250 | 30 | 250 | 329 | 28 | 56 | 68 | |
VNS-58SA36-300 | 36 | 300 | 395 | 23 | 47 | 57 | |
Product Show
Our Services
1. OEM service
2. Warranty: 5 years
3. Considerable after sale service
Color steel Compact pressure Thermal solar heater
FAQ:
1. What’s the delivery time?
10 days after receiving deposit.
2. How long is the warranty?
5 years for whole system, 1 year for accessory
3. What’s your production capacity?
6000sets/month
4. What’s the MOQ?
1 set.
5. What’s your payment term?
Container: 30% T/T in advance for deposit, 70% T/T before shipment for fist order.
70% T/T after seeing copy of B/L from second order
Sample: 100% T/T in advance
Other choices: L/C at sight.
6. What certifications do you have?
CE, SOLAR KEYMARK, SRCC and etc.
- Q: Can solar collectors be used for heating bus stations?
- Yes, solar collectors can be used for heating bus stations. Solar thermal collectors can capture and convert sunlight into heat energy, which can then be used to warm up the air or water in the bus station. This renewable energy source can provide a sustainable and cost-effective solution for heating bus stations, reducing the reliance on traditional heating systems and minimizing environmental impact.
- Q: Can solar collectors be used in electronics manufacturing?
- Yes, solar collectors can be used in electronics manufacturing. They can provide a renewable and sustainable source of energy to power various manufacturing processes and equipment, reducing reliance on traditional energy sources and minimizing the environmental impact.
- Q: Can solar collectors be used in swimming pools?
- Yes, solar collectors can be used in swimming pools. Solar collectors, such as solar panels or solar thermal collectors, can effectively heat the pool water by harnessing the energy from the sun. This eco-friendly solution helps to reduce energy costs and extend the swimming season by providing a sustainable and efficient way to heat the pool water.
- Q: Can solar collectors be used in agricultural applications?
- Yes, solar collectors can be used in agricultural applications. They can be utilized to power irrigation systems, heat greenhouses, dry crops, and provide electricity for farming operations. Solar energy can play a crucial role in reducing reliance on fossil fuels and promoting sustainable farming practices.
- Q: Can solar collectors be used in residential homes?
- Yes, solar collectors can indeed be used in residential homes. In fact, they are increasingly being adopted as a sustainable and cost-effective solution for generating renewable energy at the residential level. Solar collectors, such as photovoltaic panels or solar water heaters, are installed on rooftops or in open spaces to harness the power of the sun and convert it into electricity or heat, respectively. This allows homeowners to reduce their dependence on traditional energy sources and lower their carbon footprint, while also potentially saving money on utility bills.
- Q: Can solar collectors be used for drying timber?
- Yes, solar collectors can be used for drying timber. Solar collectors harness the energy from the sun and convert it into heat. This heat can be used to create a controlled environment for drying timber, helping to remove moisture from the wood. Solar drying is a sustainable and energy-efficient method that can be used in various industries, including timber drying.
- Q: What is the best orientation for solar collectors?
- The best orientation for solar collectors is typically facing south, as this allows them to receive the maximum amount of sunlight throughout the day. However, the optimal orientation may vary depending on the specific location and desired performance of the collectors.
- Q: Can solar collectors be used in carbon capture and storage?
- No, solar collectors cannot be directly used in carbon capture and storage. Solar collectors are designed to convert sunlight into usable energy, while carbon capture and storage involves capturing and storing carbon dioxide emissions from industrial processes. Different technologies, such as chemical absorption or adsorption, are typically used for carbon capture and storage.
- Q: Are solar collectors eligible for government incentives?
- Yes, solar collectors are typically eligible for government incentives, such as tax credits and grants, as they are considered a renewable energy source that helps to reduce reliance on fossil fuels and decrease greenhouse gas emissions. These incentives aim to promote the adoption of solar technology and make it more affordable for individuals and businesses to invest in solar collectors.
- Q: What is the ideal tilt angle for a solar collector?
- The ideal tilt angle for a solar collector depends on various factors such as the geographical location, time of year, and specific application. However, a general rule of thumb for optimal energy capture is to set the tilt angle equal to the latitude of the installation site. This helps maximize solar energy absorption throughout the year and optimize the performance of the solar collector.
Send your message to us
Evacuated Tube Solar Collectors Price 2024 New Design Heat Pipe Solar Water Heater System
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
