Electronic Ballast 150W
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 Set set
- Supply Capability:
- 1500 Piece Per Month set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Type |
Value |
Output power |
150W |
Input frequency |
50Hz-60Hz |
Current crest factor |
<1.5 |
Voltage |
220-240V |
Power Efficiency |
95%(Max) |
Material |
Aluminum |
Fan |
no |
THD |
<10% |
Lamp distance from ballast(max) |
15m |
Certificate |
CSA/CE/ROHS/UL |
Dimension |
150*80*30mm |
Max case temperature(T C) |
90°C |
Warranty |
3year |
2.Applications of Electronic Ballast 150W
Application for public lighting, like street lamps, marketplace, highway tunnel, public plaza,
theater, advertising and publication, industrial and mining enterprises, station dock, construction scene, horticulture and hydroponics
3.Package & Delivery of Electronic Ballast 150W
Protected with Polystyrene foam, Packaged by Export Carton/Pallet
- Q: Daylight lamp tube do not ballast, can connect directly electricity
- This voltage can't make neon bulb conductive (neon bulb breakdown voltage is 150 v or so) and shine, bimetallic strip is no longer connected, at this time, the fluorescent lamp can continuous light. Is a core inductance coil inductance ballast, the inductance of the nature is when the current in the coil change, will cause the change of the magnetic flux in coil, thus produce inductive electromotive force, the direction and the current in the opposite direction, thus hindering the current changes.
- Q: What is an electronic ballast? What is a inductive ballast? What's the difference between these two? How to distinguish? What's the difference between today's LED?
- Electronic ballast is an alternating current that changes the frequency (50HZ / 60HZ) alternating current to a higher frequency, and can make one or more fluorescent lamps normal A converter that starts and stabilizes the work. The basic principle: use electronic components to make up high-frequency circuit. Turn the light ac power supply into direct current, and then change from the inverter For high frequency alternating current, the high frequency voltage of 20 ~ 50KHZ is produced by oscillating circuit to start and light fluorescent lamps, and adjust correctly to match the lamp. Meet the starting voltage of different power lamp, the voltage of the lamp and the current of the lamp. Advantage - electronic ballast has the following advantages:
- Q: What does the ballast do
- The light tube is the effect of the ballast (limiting flow), which makes the lamp tube work properly. Gas discharge lamp has a higher starting voltage and low discharge voltage. When the lamp by high pressure after start-up, voltage drop, current increase, such as unrestricted, lamp current will continue to increase until the lamps may be burned, and so must be concatenated in the discharge lamp lighting circuit a ballast and lamp type, specification matching with the lamps start high start voltage, and limit the lamp current make the stability of a specified range
- Q: The effect of the ballast on the lamp tube
- I am explains: fluorescent lamp on the rev limit flow and instantaneous high pressure equipment should call ballast, he is at the core of silicon steel ingot enameled wire, such iron core coil, power outages, in an instant can produce high voltage, self inductance on the electrodes at the ends of the tube (filament).
- Q: How do you get a u-tube of two lines from the electronic ballast
- Resolved. It should be a short answer to the four wires, and the rest of them will be even better, and the answer is closer, thank you. Each side is welded two leads come out to become four root!
- Q: What is the difference between a energy-saving lamp and a fluorescent lamp?
- Daylight tubes convert electricity to light energy by about 75%. Heat energy 20%. Energy consumption 5%. (ballast) (1.5% of new ballast). Energy-saving lamp and fluorescent lamp principle is the same. The difference is the electronic ballast less volume, inside, electric fluorescent starter is inside, and you didn't pay attention to. And it is not the same as the gas inside. Its electric energy into light energy about 80% and fluorescent lamp's not much difference.
- Q: How does the selection of the ballast choose the ballast
- High-pressure sodium lamps and ballast High pressure sodium lamp and high pressure mercury lamp in performance is different, not only mercury search within high pressure sodium lamp, also filled with sodium, during the lamp work, sodium and mercury in the form of liquid sodium mercury gas storage in the cold end section of the discharge tube. During the lifetime of a high-pressure sodium lamp, the power of the lamp changes as the voltage of the lamp changes. This situation is different and high pressure mercury lamp, high pressure mercury lamp in power changes lamp voltage is relatively stable, because high pressure mercury lamp light while working inside the mercury vapor pressure in saturated condition. The relationship between the voltage of the lamp and the power of the lamp is based on the excess of sodium mercury in the discharge tube. During the lamp work, only part of the mercury and sodium vapor pressure, vapor pressure also is reflected in the light of high and low voltage, it depends on the discharge tube "cold end temperature. The change of the temperature of the cold end result in the change of the vapor pressure, the change of the lamp voltage, and the change of the power of the lamp. The relationship between lamp voltage and lamp power in a certain power range is approximately linear
- Q: Can electronic ballast be used?
- Electronic ballast, a kind of ballast, refers to Electronic devices that use Electronic technology to drive electric light sources to produce the needed lighting. Corresponding to this is the inductor type ballast (or ballast).
- Q: Can ballast be replaced with the usual daylight tube ballast?
- You can. In fact, the uv tube is a normal fluorescent tube that is not coated in fluorescent powder; And that's what you do with the uv tube, if you put a fluorescent agent in it, that's the normal daylight tube... So, the elements on the circuit can be interchanged. Pay attention to the power match..
- Q: The difference between an led drive and a power source and a ballast
- They're all on the switch Leds require dc work, and the current is constant: 3.3vdc, 350 milliamps A fluorescent lamp usually requires alternating current: 77VAC, 0.2 ampere. 3 from 220V to their way of communication. Power supply, electronic ballast is just a power switch. 4 early is inductive ballast, fluorescent tube is nonlinear load, current and voltage on both ends is small, the current is bigger, so there must be something curb its current. This is an early inductance ballast, now electronic ballast The pure power supply is constant pressure, the output 12V, which is 12V, is small, and the load can range from zero to maximum. Leds now do constant current, which is a lot more volatile and has to do with LED properties.
1. Manufacturer Overview
Location | Guangzhou, China |
Year Established | 2004 |
Annual Output Value | Above US$ 0.15 billion |
Main Markets | 30.00% Northern Europe 25.00% North America 45.00% China Mainland |
Company Certifications | ISO 9001 |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | Huangpu |
Export Percentage | 41% - 50% |
No.of Employees in Trade Department | 40 People |
Language Spoken: | English; Chinese |
b) Factory Information | |
Factory Size: | Above 100,000 square meters |
No. of Production Lines | Above 4 |
Contract Manufacturing | OEM Service Offered; Design Service Offered |
Product Price Range | Average |
Send your message to us
Electronic Ballast 150W
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 Set set
- Supply Capability:
- 1500 Piece Per Month set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords