Defrost Timer(Freezer Timer)
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 50000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Defrost timer(freezer timer) is designed to control defrosting time for refrigerators, showcases, freezers,ice maker and so on.
Defrost timer(freezer timer) is applicable for controlling defrost timing in the refrigerating systems of the refrigerator and other freezer.Defrost timer( series) driven by mini-ACS(Alternating Current Synchronous) motors, good timing, little power consumption, low noise; high capacity switch design, better loading capacity; sophisticated structure, suitable for installing inside or outside .
Specification as below:
1.Ratings:AC100~127V 50/60Hz AC200~240V 50/60Hz
2.Insulation Resistance:≥100MΩ
3.Contact rated power:5A
3.Power:≤1.5W
4.Noise:≤30dB
5.Environmental conditions: Temperature -20 °C ~ 63 °C, relative humidity below 95%
6.Useful Life:≥250000
TIMETABLE
NO. | Prodiuct Model | Working Cycle Time | Defrost Time | ||
50Hz | 60Hz | 50Hz | 60Hz | ||
1 | TMDE-309 | 3hr40m | 3hr04m | 10m | 7m30s |
2 | TMDE-320 | 3hr41m | 3hr04m | 20m | 16m |
3 | TMDE-409 | 4hr | 3hr19m | 9m | 7m25s |
4 | TMDE-415 | 4hr | 3hr19m | 15m | 12m39s |
5 | TMDE-418A | 4hr50m | 4hr | 18m | 15m |
6 | TMDE-420 | 4hr | 3hr19m | 20m | 16m39s |
7 | TMDE-424A | 4hr50m | 4hr | 24m | 20m |
8 | TMDE-425 | 4hr | 3hr19m | 25m | 20m49s |
9 | TMDE-617 | 6hr1m | 5hr | 17m40s | 14m43s |
10 | TMDE-625 | 6hr2m | 5hr | 25m | 20m49s |
11 | TMDE-630 | 6hr2m | 5hr | 30m | 25m |
12 | TMDE-706 | 7hr54m | 6hr35m | 7m30s | 6m15s |
13 | TMDE-802 | 8hr46m | 7hr18m | 2m24s | 2m |
14 | TMDE-807 | 8hr1m | 6hr40m | 7m3s | 5m53s |
15 | TMDE-814 | 8hr | 6hr40m | 14m | 11m40s |
16 | TMDE-8030 | 8hr1m | 6hr40m | 30m | 25m |
17 | TMDE-909 | 9hr21m | 7hr48m | 9m | 7m30s |
18 | TMDE-1210 | 12hr06m | 10hr05m | 10m48s | 9m36s |
19 | TMDE-1211 | 12hr21m | 10hr18m | 10m48s | 9m36s |
20 | TMDE-1240 | 12hr06m | 10hr05m | 40m | 33m20s |
21 | TMDE-1302 | 13hr | 10hr50m | 2m24s | 2m |
22 | TMDE-1305 | 13hr | 10hr50m | 5m | 4m10s |
23 | TMDE-1310 | 13hr | 10hr50m | 10m48s | 9m |
24 | TMDE-1441 | 14hr26m | 12hr01m | 41m | 34m10s |
25 | TMDE-2415 | 24hr02m | 20hr01m | 15m | 12m |
- Q:Get the method of the relay time parameter
- This method can detect the time parameters such as relay action time, action hopping time, release time, release back time
- Q:Contactor dynamic performance detection technology and comprehensive evaluation method
- and can not be on the dynamic characteristics of electrical appliances and mechanical life of the impact of comprehensive assessment.
- Q:Why should the thermal relay be used with the AC contactor
- If the fault occurs at this time, the motor is overloaded, then an excessively large current is applied to the thermal element of the thermal relay FR
- Q:What causes the AC contactor to be damaged
- Damage to the product itself (such as the coil broken or burned, the mechanical moving part was stuck, the shaft rust or skew, etc.) 5. Contact spring pressure and overtravel. Increase the supply voltage
- Q:The difference between electromagnetic contactor and AC contactor
- but the most advanced contactor for the thyristor (thyristor) contactor, without the use of electromagnetic systems, directly from the thyristor conduction And trigger, and does not belong to the electromagnetic contactor
- Q:Electrical performance test technical status related to the connector
- contact electrical parameters of the main detection by the voltage, current transformers, data acquisition card and PC to complete.
- Q:How to use Star Triangle to start contactor orders and processes
- the motor connected into a star, and make contactor KM was electric, the motor star start. In order to prevent this time KM
- Q:How does the contactor interlock?
- The normally closed contacts of the KM2 contactor are connected in series to the coil circuit of the KM1 contactor, but if a contactor is welded
- Q:AC contactor technology development
- with permanent magnet drive mechanism to replace the traditional electromagnet drive mechanism and the formation of a micro-power contactor.
- Q:What about the number of AC contactors?
- and the auxiliary normally open contact is disconnected , Thereby cutting off the power supply
1. Manufacturer Overview |
|
---|---|
Location | Zhejiang, China (Mainland) |
Year Established | 2000 |
Annual Output Value | US$1 Million - US$2.5 Million |
Main Markets | South America; Eastern Europe; Southeast Asia; Africa; Oceania; Mid East; Eastern Asia |
Company Certifications | TEST REPORT; TEST REPORT; TEST REPORT; CE certificate |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Ningbo, Shanghai |
Export Percentage | 51% - 60% |
No.of Employees in Trade Department | 3-5 People |
Language Spoken: | English, Chinese |
b)Factory Information | |
Factory Size: | 3,000-5,000 square meters |
No. of Production Lines | 3 |
Contract Manufacturing | OEM Service Offered Design Service Offered |
Product Price Range |
Send your message to us
Defrost Timer(Freezer Timer)
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 50000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords