Cold drawn C type steel
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m.t.
- Supply Capability:
- 10000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of Carbon Steel C Channel:
1.We supply high quality Carbon Steel C Channel at reasonable price, including Chinese standard, Japanese standard and so on.
Standard | GB/JIS/EN/ASTM/DIN |
Material Grade | Q235B,Q235,Q345,Q345B,SS400,S235JRG1,A36,ST37-2 |
Technique: | Cold Rolled |
Sizes as per chinese standard: |
80×40×20×2.5 - 180×60×20×2.5
|
Sizes as per Japanese standard: |
180×60×20×3 – 300×80×20×3 |
Length: | 6meter, 9meter, 12meter |
Note: we are also competent to provide our customers other Carbon Steel C Channel based on other sizes according to customer’s requirements.
2. The detailed sections of MS C Channel Bar as per GB standard.Just as followings in the table-1:
Size | Weight（kg/m） | Size | Weight（kg/m） |
80×40×20×2.5 | 3.925 | 180×60×20×3 | 8.007 |
80×40×20×3 | 4.71 | 180×70×20×2.5 | 7.065 |
100×50×20×2.5 | 4.71 | 180×70×20×3 | 8.478 |
100×50×20×3 | 5.652 | 200×50×20×2.5 | 6.673 |
120×50×20×2.5 | 5.103 | 200×50×20×3 | 8.007 |
120×50×20×3 | 6.123 | 200×60×20×2.5 | 7.065 |
120×60×20×2.5 | 5.495 | 200×60×20×3 | 8.478 |
120×60×20×3 | 6.594 | 200×70×20×2.5 | 7.458 |
120×70×20×2.5 | 5.888 | 200×70×20×3 | 8.949 |
120×70×20×3 | 7.065 | 220×60×20×2.5 | 7.4567 |
140×50×20×2.5 | 5.495 | 220×60×20×3 | 8.949 |
140×50×20×3 | 6.594 | 220×70×20×2.5 | 7.85 |
160×50×20×2.5 | 5.888 | 220×70×20×3 | 9.42 |
160×50×20×3 | 7.065 | 250×75×20×2.5 | 8.634 |
160×60×20×2.5 | 6.28 | 250×75×20×3 | 10.362 |
160×60×20×3 | 7.536 | 280×80×20×2.5 | 9.42 |
160×70×20×2.5 | 6.673 | 280×80×20×3 | 11.304 |
160×70×20×3 | 8.007 | 300×80×20×2.5 | 9.813 |
180×50×20×2.5 | 6.28 | 300×80×20×3 | 11.775 |
180×50×20×3 | 7.536 | ||
180×60×20×2.5 | 6.673 |
Table-1
3. The chemical composition of MS C Channel Bar according to Q235B is shown in Table-2.
Alloy No | Grade | Element(%) | ||||
C | Mn | S | P | Si | ||
Q235 | B | 0.12-0.20 | 0.3-0.7 | ≦0.045 | ≦0.045 | ≦0.3 |
Table-2
Note: we are able to present our customers relevant SGS test report for chemical composition of Carbon Steel C Channel.
4. The mechanical property of Carbon Steel C Channel according to Q235B is shown in Table-3-1 and Table-3-2
Alloy No | Grade | Yielding Strength Point(Mpa) | |||
Thickness(mm) | |||||
≦16 | ＞16-40 | ＞40-60 | ＞60-100 | ||
≧ | |||||
Q235 | B | 235 | 225 | 215 | 205 |
Table-3-1
Alloy No | Grade | Tensile Strength(Mpa) | Elongation After Fracture(%) | |||
Thickness(mm) | ||||||
≦16 | ＞16-40 | ＞40-60 | ＞60-100 | |||
≧ | ||||||
G235 | B | 375-500 | 26 | 25 | 24 | 23 |
Table-3-2
Note: we are able to present our customers relevant SGS test report for mechanical property of MS C Channel Bar as customer’s request.
- Q: What does "M" mean?
- M section steel: sectional shape steel like M.
- Q: Does the profile include H?
- In addition, the profiles include: profile steel, including gear ring, horseshoe steel, pole steel, foot plate, shallow channel, small channel steel, T-shaped steel, ball flat steel, send steel, hot-rolled, six angles, etc.. There are also rivets, steel, farm tools, steel, window frames, steel. Cold bending, cold drawn steel and so on.
- Q: What does "BH" mean?
- BH is welded to H just, and RH is hot rolled H steel.
- Q: Elastic modulus of section steel
- Generally speaking, the elastic body exerts an external function, and the elasticity experiences the change of the shape (called strain). The general definition of the elastic modulus is that the stress is divided by the strain. When the material is in the elastic deformation stage, its stress and strain should be changed into a positive proportion (that is to say, according to Hooke's law), and the coefficient of proportionality is called the elastic modulus.
- Q: What kind of steel is used in steel columns?
- At present, there are 3 kinds of steel pile commonly used in engineering construction, they are steel pipe column, steel column and steel sheet pile.
- Q: What is special steel?
- Reinforcing bars for reinforced concreteIs a small type steel reinforced concrete. Including hot rolled round steel bar and prestressed concrete with reinforced concrete, thermal cold rolled steel. Steel reinforcement strip. In addition, also known as the other thread steel. Because the steel in rolling surface of rolled thread handle or reinforcement, steel reinforced concrete is in the construction industry reinforced. According to the material yield point and tensile strength, I, II, III and IV grade steel. The steel bars are used directly. The rebar, reinforced concrete to stress by heat treatment after heat treatment of high strength, but does not apply to steel welding and spot welding, reinforced by 40Si2Mn, 48Si2Mn, 45Si2Cr etc. steel after heat treatment is made, nominal diameter 6, 8.2, 10 mm. Cold rolled ribbed bar with Q215, Q235, 24MnTi steel, nominal diameter 4-12 mm. Steel after heat treatment should be rolled into plate, to heat treatment delivery.
- Q: Can the section steel butt joint in the end?
- Docking is usually available.If welding, it is mainly worried that the welding is not strong and the welding stress is too large. The wall thickness of the section steel is thin, and the butt welding itself is the most unreliable. So, in the joint lining board, fillet welded. Attention is paid to reducing stress in the process.Bolt connection also requires lining plate, pay attention to bolt size, quantity and spacing. To calculate whether thin-walled steel itself will be crushing, the solution is solder paste board, and bolt holes.In short, the principle is that the strength of the butt joint is not weaker than that of other parts, and there is no greater stress.
- Q: What are the common types of profiled steel?
- Section steel is divided into two types: simple section steel and complex section steel.Simple section steel: steel, wire rod, square steel, flat steel, six angle steel, triangular, elliptical steel, steel arch steel, etc..
- Q: How to distinguish cold formed section steel and hot rolled section steel?
- Hot rolled steel is a kind of steel with various geometrical cross section formed by heating billet. According to the different angles can be divided into flat steel, steel section, steel and I-shaped steel and hot-rolled L steel; steel according to the different section shape, divided into simple and complex section or section section and section three steel cycle:The characteristics of the simple section are the cross section, any point on the periphery as a tangent, generally not cross section, such as round steel, square steel, six angle steel, flat steel, triangular steel, arch steel and elliptical steel.Complex sections include angle steel, I-beam, channel steel, T steel, H steel, Z steel, rail, steel plate pile, window frame steel and other miscellaneous section steel;The periodic section shape and dimension along the length direction of the steel section changing periodically, such as rebar, axle and steel ploughshare.
Send your message to us
Cold drawn C type steel
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m.t.
- Supply Capability:
- 10000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
