Button Type Toilet Flush Valve
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 300 Pieces pc
- Supply Capability:
- 5000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Flush Valve, Toilet Flush valve, Manual Type Toilet Flush Valve
*Haixin Item No.: GS-8113
*Material: brass
*Product Name: Flush Valve, Toilet Flush valve, Manual Type Toilet Flush Valve
*Haixin Item No.: GS-8113
Features:
1) Material: brass
2) Function: Water saving, self-closing
3) Flushing rate: 4-12 seconds, about 4.5L -12Lwater
4) Usage: Used in public toilet in order to save water, easily operated by hand or finger
5) Haixin Advantage: in high polish and plating finish, elegant appearance, easy to install and uninstall, covenient to operate, accessories can be supplied according to customer demand, inlet and outlet diameters can be chosen.
6) Product Design Merit:
This is an elegant looking flush valve, flushing effect is excellent.
Differrent outlet pipe lengths can be chosen.
Product Packing Info:
*Net Weight (KG/pcs): 2.1
*Gross Weight (KG/ctn): 24
*Package (pcs/ctn): 10
*1 bubble bag/pc
*Carton Dimension (CM): 36 X 31 X 36
- Q: Bathroom flush how to install better, toilet flush valve has been how to repair the water?
- To see whether the water pipe is installed or concealed. You can simply put the flush water pipe laying a good pipe after the stainless steel pipe size to do on the line. Concealed need to pay attention to the height of the pipe elbow set the height if it is the most commonly used 20 elbow pedal height to stay away from the completion of the surface is greater than 15 cm (too high does not look too easy to use too low foot pedal Not on) Flush stainless steel pipe from the wall to complete the surface 2 cm on the line.
- Q: What is good for the flush pallet flush valve?
- As the upper part of the valve body installed in the top of the mouth of the bucket, when the tank water level when the water tank into the water tank. An automatic flush valve is composed of a valve body, a self-control device, an electric motor, a transmission wheel, a dial shaft and a ceramic chip. The automatic control valve is characterized by the automatic control of the motor and the motor connecting the transmission wheel, The shaft is coupled to the ceramic chip so that the valve opens and closes.
- Q: Squat pan flush valve has been how to do water
- Do not repair or change the inside of a part of it, my home is.
- Q: How can the flush valve of the toilet be removed?
- In the middle of the lid with two buttons of the kind of flush valve is: the lid to win, his hands to seize the entire flush counterclockwise rotation about 90 ° can be won. It is the kind of buckle, not the thread.
- Q: What valve is the flush valve?
- Self-closing flush valves are suitable for use in homes and public flush toilets. The utility model is composed of the main body valve and the accelerator, and the accelerator can obviously increase the fluid flushing speed of the main valve and prevent the harmful gas from entering the valve chamber. The flushing valve design is reasonable, easy to use and maintenance, washing the amount of water consumption less. In addition to the seal, the rest are all made of engineering plastics, with small size, light weight, cheap and so on. This product can be a reasonable flow of electricity to obtain the maximum flow rate, rinse effect.
- Q: How to do the flushing valve leaks
- Flush valve works: When the water from the inlet into the water tank, the drain is pressed by the rubber film, can not drain. As the water level rises, water flows through the hole A through the hole and flows from the hole B into the elbow. As the rubber membrane is equal to the upper and lower water pressure, still hold the drain. When the water level continues to rise above the highest point of the elbow, the water will flow through the pipe into the drain. As the hole B is greater than the hole A, the water through the A hole when it is subject to greater resistance, pressure is also lost, so the ball within the crown to reduce the amount of water will appear at the top. At the same time, the upper pressure of the rubber membrane is drastically reduced, and the lower pressure is equal to the pressure of the atmospheric pressure plus the pressure generated by the water. It is much larger than the upper pressure, the rubber film is protruded and the drain is opened, and the water in the tank is discharged rapidly (about 10 seconds). When the water level in the tank drops, the water in the ball crown can still be discharged through the elbow due to the siphon phenomenon, keeping the vacuum present, so that the rubber film will not move down. When the water in the box is finished, the rubber film rubber mold is pressed again Drain, re-water storage. If the water flow in the inlet is controlled, the drainage cycle can be determined. So the cycle, so that the toilet can be automatic, regular rinse. This is the working principle of the toilet flushing valve.
- Q: Each flush must use a good effort to get down, rushed out of the water and small, small water is not a water problem,) is the kind of diameter is only 3 cm, the most common of the cylindrical Species. Is not the leading issue, or the line is not installed it? Please master advise
- Such a situation is best to see the scene, it is recommended to find a plumbing workers, to see,
- Q: Is the size of the flush delay valve for the toilet uniform?
- Second, we can also use the ruler to measure the inner diameter of the inner wire joint (not the diameter of the water pipe), if the inner diameter is about 2.5cm, then 6 points (DN20) flush valve; if the inner diameter is about 3cm, Then one inch (DN25) flush valve.
- Q: Delayed flush valve valve 1.2 kg pressure Why flush valve flush particularly small water faucet particularly large
- Remove the flush valve, in the water pipe hole in the hole there is a bowl of mesh, clean up debris just fine!
- Q: This flush valve can not close the water how to repair?
- Turn off the front of the water meter and then replace the valve.
1. Manufacturer Overview
Location | Zhejiang,China (Mainland) |
Year Established | 1990 |
Annual Output Value | US$50 Million - US$100 Million |
Main Markets | 30.00% South America 30.00% North America 20.00% Africa 5.00% Eastern Europe 2.00% South Asia 2.00% Southern Europe 2.00% Northern Europe 2.00% Central America 2.00% Western Europe 2.00% Eastern Asia 2.00% Mid East 1.00% Southeast Asia |
Company Certifications | ISO9001 Certificate |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | Ningbo, Shanghai |
Export Percentage | 51% - 60% |
No.of Employees in Trade Department | 6-10 People |
Language Spoken: | English, Chinese |
b) Factory Information | |
Factory Size: | 30,000-50,000 square meters |
No. of Production Lines | 10 |
Contract Manufacturing | OEM Service Offered Design Service Offered Buyer Label Offered |
Product Price Range | Average |
Send your message to us
Button Type Toilet Flush Valve
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 300 Pieces pc
- Supply Capability:
- 5000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords