Silica Fiber Textiles Basalt Fiber Fireproof Fabric for High Temperature Proofing
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1500 m²
- Supply Capability:
- 1000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Basalt Fiber Fireproof Fabric Introduction
Continuous basalt fiber fabric is made by impregnating woven basalt fiber scrim with asphalt and then drying to be made.
In the normal temperature, the ratio of the elastic modulus between the basalt fiber concrete and the asphalt concrete is 24: 1.
Basalt fiber textile woven into the fiber grille, molded and dried after dipping treatment. The main role of the Basalt Mesh is to improve resistance to fatigue cracking, high temperature rutting, low temperature shrinkage crack, delaying reflective cracking, for cement mortar or concrete. Mainly used for reinforcement, filter and high temperature resistant.
Advantages of Basalt Fiber Fabric
Basalt fibre concrete has the excellent resistance to deformation, the elongation at break is about 3.1%. Basalt Fiber owns the high-temperature resistance, frost resisting resistance (-260~650 ℃), the same thermal expansion coefficient with the asphalt concrete, the high tensile strength, ultraviolet resistance, the stable chemical resistance, ageing resistance. The stirring temperature of the asphalt concrete is up to 190℃. The high-temperature Basalt fiber is the best alternative of the polyester fiber. It can satisfy the asphalt stirring temperature (190 ℃), and it is the excellent construction material for reinforced cement & concrete, and it has the outstanding penetration resistance.
Basalt textile/geotextile is more durable than metallic and glass-fiber reinforcement due to basalt fiber’s excellent performance.
Specifications of Basalt Fiber Fabric
Item no. | warp | weft | Density(inch) | Weight(gsm) | Thickness(mm) | Length/Roll |
WP105-1000 | 33Tex | 33Tex | 37.5×37.5 | 105 | 0.1 | |
WP180-1000 | 33Tex*2 | 33Tex*2 | 37.5×30 | 180 | 0.18 | 100 |
WP600-1000 | 600Tex | 600Tex | 12.2×12.2 | 600 | 0.6 | 50 |
WD250-1000 | 600Tex | 68Tex | 8.7×3.5 | 250 | 0.25 | 100 |
WD300-1000 | 600Tex | 68Tex | 12.3×3.5 | 300 | 0.3 | 100 |
Specification for part of satin basalt fiber geotextile
Item no. | warp | weft | Density(inch) | Weight(gsm) | Thickness(mm) | Length/Roll |
W300-1000 | 33Tex*3 | 33Tex*3 | 45×30 | 300 | 0.3 | 100 |
W430-1000 | 33Tex*4 | 33Tex*4 | 40×35 | 430 | 0.4 | 100 |
Application of Basalt Fiber Fabric
Plain basalt fiber fabric is widely used in electrical appliances, electronics, transportation, chemical engineering, construction, fire control, environmental protection and the field of medical apparatus and instruments.
FAQ:
1. Which payment do you accept?
For you convinience, our payment can be L/C,TT
2. Is free sample available?
We can supply free samples. You'll just need to pay for express cost.
3. How about your quality?
We have strict quality control system, we make testing on incoming raw material and finished products. Your third party testing is also welcomed. With high quality, our products are used on government projects at home and abroad. Our product quality is accepted by clients from all over the world.
4. When will you reply my request?
You are our expected customer, we’ll reply your request within 24hours. Please feel free to contact us at any time.
Photos
- Q:Can quartz watches be set with mobile phones and computers?
- General quartz watch maintenance is so, avoid strong impact: now watches, although there is shockproof function, still should avoid sudden impact, so when doing exercise, it is best to take off the watch.
- Q:Can fiber quartz heater regulate temperature?
- No way, because the inside of the silk, general skills are fixed
- Q:How are quartz products made?
- Concrete, cementitious material, road building material, artificial marble, cement, physical property test material (cement standard sand), etc.chemical industryA raw material for silicon compounds and water glass etc.; a filler for a sulphuric acid tower; amorphous silica powdersMechanicsThe main ingredient in sand casting, grinding materials (sand, hard abrasive paper, sandpaper, emery cloth, etc.)ElectronicsHigh purity metallic silicon, optical fiber for communications, etc.Rubber, plasticFiller (improved abrasion resistance)coatingFiller (to improve the weatherability of coatings)Quartz is also a general term for crystals, because they can be used as crystal minerals and are produced by quartz cutting and grindingAre the same ingredients, identification and other characteristics, the difference is that the crystal can be used as a gem grade materialsQuartz after staining, most can be as imitation jade, such as jade, Dushan jade etc..
- Q:Don't know how Pang Ming fiberglass cloth cloth good or good and Heikki Haijibu quartz
- Zirconia containing mesh, fiberglass cloth, Hangzhou fiberglass, fiberglass self-adhesive tape, sealing tape of Hangzhou fiberglass, carbon fiber, carbon fiber cloth, carbon cloth
- Q:What are the uses and characteristics of quartz fiber cloth?
- Glass fiber is brittle and coarse. It is easy to break when weaving, so the fiber used for weaving glass cloth is between 3.8 and 15.5 microns. Glass fiber can be made into spun yarn and staple fiber yarn. The filament is raw materials used in high temperature melting spinning, spinning and similar general synthetic filament; short fiber is melt through the nozzle, and then by the injection blow off fine compressed air or high pressure steam and, by bundling, twisting and plying into glass staple yarn. The weaving method of glass cloth is the same as that of ordinary cotton fabric. It is usually made of coated fabrics, such as resin, and also made of printed glass cloth. Anticorrosion and insulation cloth (pipe package Jabu) products: Usage: mainly used for anticorrosion, thermal insulation.
- Q:How much is Armani dermal quartz watch ar1647?
- See: pattern and pores should be the first to identify the leather, leather can be seen on the surface of natural pattern, the pores do exist, and the distribution is uneven, the opposite side section, level of animal fiber, recognizable, lower animal fibers, with fingernails scraping on the leather fiber will be erected, pile feeling a small amount of fiber, can also be dropped, and synthetic leather fabric can see the opposite side, no animal fiber, general skin without pores, but there are some imitation pores, there will be no obvious pores, some pattern is not clear, or have a regular pattern of artificial pores are quite consistent. Natural leather shape is irregular, thickness is not uniform, its surface is often more or less there are some natural defects, the surface smooth degree, General belly relaxation, full leather surface has obvious pores and patterns, leather in the general pile. Synthetic leather and uniform thickness, smooth surface, no natural pores and incomplete, the pattern is very uniform, the leather in general without pile.
- Q:Want to buy a heater, check on the Internet, found that all kinds of heaters have their own advantages and disadvantages and applicability.I would like to ask: what are the advantages and disadvantages of carbon fiber tube heaters?Thank you
- At present, people still cannot be pumped into carbon fiber with carbon or graphite, with only some carbon containing organic fibers (such as nylon yarn, acrylic yarn, rayon, etc.) as raw materials, organic fiber and plastic resin together, on the rare gas atmosphere, under certain pressure under high heat carbonization of carbon fiber is carbon fibrous material, the chemical composition of carbon content of at least 90%. Since the elemental carbon can not be melted at high temperature (sublimation above 3800K) and is insoluble in various solvents, carbon fiber can not be made from carbon elements. Carbon fibers can be obtained by solid phase carbonization of high molecular organic fibers or by pyrolysis of low molecular hydrocarbons. At present, most of the carbon fibers produced in the world are made by solid phase carbonization of polyacrylonitrile fibers. The process is A pre oxidation: heated in air and maintained at 200-300 degrees for tens to hundreds of minutes.
- Q:What are the differences between the two models of quartz microfiber filter paper QM-A and QM-H?
- Micro quartz fiber filter is applicable to high temperature acid gas sampling, the biggest difference is that QM-H is pure quartz micro fiber filter, compared to QM-A more high temperature, QM-A can withstand 500 degrees, and the QM-H can withstand high temperature of 900 degrees
- Q:Can quartz watches be set with mobile phones and computers?
- Do not close the magnetic items: watch parts for metal products, although the antimagnetic device, but in case of magnetic objects, easy to make the time allowed, it is best to put a small radio, TV and other electrical products.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Silica Fiber Textiles Basalt Fiber Fireproof Fabric for High Temperature Proofing
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1500 m²
- Supply Capability:
- 1000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
