Aluminum Sheet/Coil/Foil Hoods Ventilation Duct Pipe
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m.t.
- Supply Capability:
- 80000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Aluminum Sheet/Coil/Foil Hoods Ventilation Duct Pipe
Products description
ASI – Jacket (sleeve) 1 layer aluminum +1layer polyester +1helix steel wire +1 polyester
Insulation: Glass wool 25mm (thickness) 220g/m2
Inner Duct: aluminum + polyester
Application: ASI is a range of fully flexible insulated ducting. And provides outstanding resistance and durability, suitable for use with heating, ventilation and air conditioning systems.
Material of Duct | aluminum foil + pet + helix steel wire+ polyester |
Thickness of Inner Duct | 25 ~ 27 micron |
Fire Resistance | Limited combustibility |
Temperature Range | -30 °C/+150 °C |
Operating Pressure | 3000 Pa |
Maximum Air Velocity | 30 m/s |
Available Diameters | 50mm - 1200mm |
Available Inches | 3" - 20" |
Standard Length | 5m, 6m, 7.5m, 10m |
Packing | Cardboard box |
Features
1. Acoustic insulated duct made of aluminum foil + pet + helix steel wire+ polyester
2. Apply for low/medium/ high pressure, use for air ventilation in each environment.
3. Round style, and easy to install oval or round connection.
4. Fireproofing, at high temperatures or in case of fire, no toxic gas emitted.
5. Easy to delivery.
6. Good insulated---heat insulated
7. Absorb noise---can absorb the noise from the shaking when ventilated
8. No corrosive---not corrosive the aluminum pipe and metal parts
9. Durability---not decay, mildew
10. Fire---resistance
11. Practicality: suitable for the densely-populated area(such as school, supermarket, office, stadium, theater, factory.),high requirement of the environment area, such as hospital, laboratory, howff, bus, train, broadcasting studio.
Construction
Single layer aluminum flexible duct (AFD-S)
1) 1 layer of the aluminium laminated with the polyester with the coil made of the spring wire.
2) Total 2 layers: 1st layer: Aluminum foil ( 10um); 2nd layer: Polyester(15um)
3) Spring wire: carbon steel from 0.9~1.3mm
Multi layer aluminum flexible duct (AFD-D)
1) 2 layers of the aluminium laminated with the polyester with the coil made of the spring wire.
2) Total 3 layers: 1st layer: Aluminum foil ( 10um); 2nd layer: Polyester(15um); 3rd layer: Aluminum foil ( 10um)
spring wire: carbon steel from 0.9~1.3mm
FAQ
--Q: Can I get your latest products catalogue?
--A: Yes, it will be sent to you in no time.
--Q: What is the MOQ?
--A: 2 tons
--Q: What are your payment terms?
--A: We accept L/C, T/T.
--Q: What kinds of alloy can you supply?
--A: 1000 series: 1050, 1060, 1070, 1100, 1145,1200
3000 series: 3003, 3004, 3105, 3104
5000 series: 5052, 5083, 5754, 5182
6000 series: 6061, 6063, 6062, 6063
8000 series: 8011, 8021
--Q: What kinds of temper can you supply?
--A: O-H112: O,H12,H14,H16,H18,H22,H24,H26,H,32,H34,H111,H112
T3, T4, T6
- Q:What's the advantage of plastic packing?
- Plastic can be made into transparent or different color packaging materials and containers, which is convenient for printing, bronzing, vacuum spraying, metal plating and embossing. Moreover, most of the plastic sealing, chemical resistance (acid, alkali, salt, etc.), moisture resistance and other aspects are better than paper and metal materials.
- Q:Accidentally put all the skin care products squeezed out, the kind of tubular packaging, and then I promptly put the skin care products sucked back, can I ask skin care products can still use it?
- This is also a lot of identity, it used in the face of things, try to pay attention to it, really spent, not money can cure the cream tube. Keep it as a hand cream.
- Q:What kind of material are plastic bags made of?
- Shrinkfilm-- shrink film (Shrinkfilm) is a thermoplastic film that is stretched during production, contracted, and subjected to thermal air treatment or infrared irradiation during use. After heat treatment, the film is wrapped tightly in the package, and the shrinkage force reaches the maximum value in the cooling stage and can be stored for a long time. LDPE-- low density polyethylene (LDPE), low density polyethylene (HDPE), or LDPE, is the most widely used plastic packaging and printing industry in many countries. The specific gravity is 0.92 ~ 0.93, and can float in water. Low crystallinity (60%), under the pressure of 1000 ~ 3000kg/C square meters of bulk polymerization of high pressure polyethylene. At 23 degrees centigrade, the density is about 0.92. It is difficult to roll forming and is suitable for tubular films. Applicable to food packaging, fiber packaging, daily necessities packaging.
- Q:What's the color strip in the tail of a cosmetic tube?
- When the material is finished, the hose is placed on the automatic sealing machine. The machine senses the color bar and begins to automatically seal the hose to ensure that the package is in the correct position at the end of the seal.
- Q:CLARINS body shaping cream is bottle shaped or tubular packaging
- Formal dress should be cylinder bottle, 200 ml, but there is a kind of sample is 75 ml hose installed, buy more than 250 online, about 300 of the more reliable.
- Q:What are the disposable medical plastic bags made of?
- Low density polyethylene (PE), or LDPE, is the most widely used plastic packaging and printing industry in many countries. The specific gravity is 0.92 ~ 0.93, and can float in water. Low crystallinity (60%), under the pressure of 1000 ~ 3000kg/C square meters of bulk polymerization of high pressure polyethylene. At 23 degrees Celsius, the density is around 0.92. It is difficult to roll forming and is suitable for tubular films. Applicable to food packaging, fiber packaging, daily necessities packaging.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Aluminum Sheet/Coil/Foil Hoods Ventilation Duct Pipe
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m.t.
- Supply Capability:
- 80000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords