Air Vent Valve with High Quality Automatic Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q: What does the PN on the valve mean?
- 1, mark "ON25" and "PN16" respectively what does that mean? 2, the valve above has an outer six corners, so PN16 refers to the nominal pressure of 16 kg valve. Valves on the fittings are standard parts, special
- Q: Where is the Shanghai valve? What brand is good?
- A lot of Shanghai brand brand of Shanghai KaiWeiXi, Department of finance the Kemei high Lidun Shanghai Karon these are good
- Q: What is the choice of pneumatic valve or electric valve for ultrafiltration inlet control valve?
- Pneumatic valve compared to the electric valve, the valve can be the same, rubber lined butterfly valve or other valves, pneumatic valve opening speed (Basic 1 second can be fully open), the price is lower than the electric valve. But there must be process air (4-6bar compressed air). According to my experience, if the scene has compressed air, it is recommended to use pneumatic valve, if there is no compressed air, it is recommended to use electric (electric valve expensive, open valve slow).
- Q: such as gate valve, three way plug valve
- The lower part of the pressure gauge installed water pipe, there are water, avoid high temperature, medium pressure gauge contact directly cause damage, so regular cleaning, in order to avoid congestion, three way plug function is used for flushing, please see "how to operate them.".
- Q: Can the gas valves be switched off regularly?
- The small valve called skin stopcocks, his design is often switch, but for the sake of safety, natural gas company also installed a lock valve in front, once the leak immediately close the valve, the valve once closed to find a Gas Co came to open, so it is not necessary the case don't go off.What we usually need to pay attention to is..:1, every time you finish cooking, you must close the pipe plug valve (the valve you said).2, regular inspection of the skin tube leakage (3 months 1 can be this).3, the leather pipe and the leather pipe plug valve connected to the place has a ferrule, inspection found loose, must be tightened with a screwdriver, in case of leakage.4, the use of gas should pay attention to indoor ventilation, winter must open lampblack machine, in case of poisoning.Don't worry as long as you do the above.
- Q: What does valve DN50/80 mean?
- Hello landlord DN50 valve refers to the valve diameter of 50mm DN80 is 80mm if the valve is opening and closing function, so the valve diameter should be and pipeline with the diameter or smaller number, large waste, butterfly valve to be stuck in the flange, the influence of flow.If the role of the valve is adjusted, and that caliber will be different from the pipe diameter, this is not to reduce the cost of the problem, is a result of calculation, and this calculation results with flow, pressure drop and valve resistance curve.For example, control valve, usually smaller than the pipe diameter, such as pressure reducing valve, will be smaller than the pipe diameter to two, such as 57mm pipe with DN50.
- Q: I'm going to put a solar energy and an electric water heater installed in the same hot water pipe, a valve, a valve open and close the valve B and vice versa the installation of solar and electric water heater, there can be no linkage valve?
- In industry, you say this, such as using two butterfly linkage and composition of the three-way valve to use. But civilian should be few, demand is very little ah. It is estimated that you can only install two valves and then use both hands at the same time to perform linkage.
- Q: How much is the 150LB of the valve?
- Valves can be used to control air, water, steam, a variety of corrosive media, mud, oil, liquid metal and radioactive media and other types of fluid flow.
- Q: What is the term "Z41H-16C" on the line?
- Therefore, the opening position of the valve is determined by the position of the gate (i.e. the stroke).Z41H-16C closed, the sealing surface can only rely on medium pressure to seal, that is, only rely on the media pressure to the gate sealing surface pressure to the other side of the seat to ensure the sealing surface seal, which is self sealing. Most of the valve is forced seal, that is, when the valve closes, to rely on external force to force the gate to the seat, in order to ensure the sealing surface sealing.
- Q: How are the types of valves classified?
- Pneumatic and hydraulic valvesPneumatic valve and hydraulic pressure based on a certain air, water or oil as the power source, using the cylinder (or cylinder) and the movement of the piston to drive the valve, the general pneumatic air pressure is less than 0.8MPa, the hydraulic or hydraulic pressure is 2.5MPa~25MPa. Such as used to drive diaphragm valves; rotary gas and liquid drives are used to drive ball valves, butterfly valves, or plug valves. The driving force of the hydraulic device is large, and it is suitable for driving large diameter valves. If used for driving plug valves, ball valves and butterfly valves, the reciprocating motion of the piston must be turned into a rotary motion.
Send your message to us
Air Vent Valve with High Quality Automatic Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
