Sigma Aldrich Graphite Powder 98FC VM 1% GPC as Carbon Additive for Steel Making
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 21.4
- Supply Capability:
- 5003 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Introduction
The High-purity Graphitized Petroleum Coke is made from high quality petroleum coke under a temperature of 2800°C. As a high-purity carbon material, it has characteristics of high fixed carbon content, low sulfur, low ash, low porosity, high absorptive character , no residue will be left and save production cost etc.
This product can be used as carbon raiser (Recarburizer) to produce high quality steel, special steel, cast iron and alloy or other related industry. We can get high quality steel if use it. It can also be used in plastic and rubber as an additive.
Features
The graphitized petroleum coke powder (grain) is made by graphitization heat treatment of high-quality low-ash petroleum coke at high temperature of 2800 ° C or above in vacuum. The product is featured by high carbon content, low hardness, high temperature resistance, large porosity and low heat conductivity coefficient. Compared with the traditional natural graphite and calcined coke, it can obviously improve caking property and stabilize friction coefficient, maintains the stable and comfortable braking process, and reduce the damage to mating plate surface, brake noise, wear and cost, and is an ideal material for the friction material plant. it is more and more widely used in the steel industry.
In order to control the package and quality, we send people to inspect the loading at loading port and take samples for third party inspection for everyshipment, and will keep customers updated about the loading condition and the inspection result.
Graphite petroleum coke is used in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, graphite petroleum coke has high absorptive character, no residue will be left, save production cost.
Specifications
Products | GPC | |
F.C.% | 98.5MIN | 98MIN |
ASH % | 0.8MAX | 1MAX |
V.M.% | 0.7 MAX | 1 MAX |
SULFUR % | 0. 05MAX | 0.1MAX |
MOISTURE % | 0.5MAX | 0.5MAX |
SIZE: | 1-5MM 90% min | |
Package | By MT jumbo Bag | |
Pictures
FAQ
1, Usage: used to improve the Carbon content in steel-melting and Ductile iron foundry
2, Characteristic: high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.
3, apply: Used in electric furnace steel smelting and cast-iron for improving the carbon content
- Q: How does graphite powder solidify into a lump? What bond is best used?After solidification can be more than 1000 degrees high temperature does not change
- The only way to do this is by using physical methods, high temperature and high pressure, to agglomerate the graphite powder from the molecular level. Now, by simulating the high temperature and pressure of the earth's crust, graphite can be turned into diamond (that is, diamonds)
- Q: It's hard to remove a lot of graphite powder on the glass cake. Who has a good way to remove the graphite powder above?
- Suggestion: use a certain amount of concentrated nitric acid infiltrated graphite part, nitrate solution the best there is a certain amount of 1-2 weeks (timing can also be placed with a glass rod, pour stirred) acid, diluted with water to acid and then scrub brush. Because the temperature nitric acid reaction is very slow, but the long-term infiltration, the graphite surface. Especially with the glass contact surfaces may be immersed in a small amount of acid, oxidation, then scrub may have the effect.
- Q: Can you tin to latex paint
- Yes, it's better to paint with antirust paint and putty,
- Q: What is the industry standard of graphite powder coating for casting?
- One is purity, that is, the size of impurities, the smaller the better.
- Q: Is the graphite electrode broken like graphite, fossil oil, coke and graphite powder?
- The graphite powder is soft, black and gray, greasy and polluting paper. Hardness is 1~2, along the vertical direction with the increase of impurities, its hardness can be increased to 3~5. The specific gravity is 1.9 ~ 2.3. Under isolated oxygen conditions, the melting point is above 3000 degrees Celsius and is one of the most refractory minerals. At room temperature, the chemical properties of stone toner are relatively stable, insoluble in water, dilute acid, dilute alkali and organic solvents. The material has high temperature resistance and conductivity, and can be used as refractory materials, conductive materials, wear-resistant and lubricating materials.
- Q: How does graphite powder look good or bad?
- Graphite powder is a kind of negative electrode material for batteries.The process of graphite powder, will after the bursting of the raw ore by car to crush the rock breaking machine, and ball mill by flotation, the flotation of graphite ball mill grinding wet material sending selected, wet material will be selected to bagging dry dry machine, shower shower has become dry, dry material is graphite products. Will pour into the dry drying workshop, drying after bagging, namely ordinary graphite powder, the carbon content of the finished product is an average of 90%.The utility model relates to a pencil core, a graphite electrode for a battery, and a lubricant for a cable carA dark gray, metallic opaque opaque flaky solid. Graphite is very soft, creamy feel. It has excellent electrical conductivity
- Q: Can graphite powder be used in lithium batteries?
- Qingdao Huatai graphite more than 20 years experience in the production of graphite powder to tell you that graphite powder can be used in lithium batteries.
- Q: Whether the lubricating oil toner is coupled with the conductor?
- You don't want to lubricate the rheostat. The metal piece in it is in direct contact, so even the lubricating insulator won't make any difference (as long as you don't rub it too much).
- Q: What if the key is inserted in the hole and can not be drawn out?
- This is not a simple question, to the dorm there, there will be someone to help you repair
- Q: How to measure the iron content in graphite powder?
- Excessive amounts of dilute sulphuric acid can be used to measure the amount of gas produced, and then the amount of iron is calculated according to the amount of gas.
Send your message to us
Sigma Aldrich Graphite Powder 98FC VM 1% GPC as Carbon Additive for Steel Making
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 21.4
- Supply Capability:
- 5003 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
