Specification

Description of product:

Plain MDF Board, E2 grade

Specification:

Size: 16x1830x3660mm,1220x2440 or as request

Formaldehyde emission: E2 grade or E1, 

Density: from 640kgs/m3 to 850 kgs/m3

Thickness: from 2mm to 25mm

Quality standard: EN standard, GB/T standard

Surface: well sended or non-sanded

Benefits of MDF:

it Is an excellent substrate for veneers.

Some varieties are less expensive than many natural woods

Isotropic (its properties are the same in all directions as a result of no grain), so no tendency to split

Consistent in strength and size

Flexible. Can be used for curved walls or surfaces. Shapes is  well.

Stable dimensions (won't expand or contract like wood)

Easy to finish (i.e. paint)

General Informaiton:

Medium-density fibreboard (MDF) is an engineered wood product made by breaking down hardwood or softwood residuals into wood fibres, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperatureand pressure.MDF is generally denser than plywood. It is made up of separated fibres, but it can be used as a building material similar in application to plywood. It is stronger and much denser than particle board.

Comparison to natural woods

MDF does not contain knots or rings, making it more uniform than natural woods during cutting and in service.[5] However, MDF is not entirely isotropic, since the fibres are pressed tightly together through the sheet. Typical MDF has a hard, flat, smooth surface that makes it ideal for veneering, as there is no underlying grain to telegraph through the thin veneer as with plywood. A so-called "Premium" MDF is available that features more uniform density throughout the thickness of the panel.

MDF may be glued, doweled or laminated. Typical fasteners are T-nuts and pan-head machine screws.[6] Smooth-shank nails do not hold well, and neither do fine-pitch screws, especially in the edge. Special screws are available with a coarse thread pitch, but sheet-metal screws also work well. Like natural wood, MDF may split when woodscrews are installed without pilot holes. 

FAQ:

① why from okorder？

Okorder is a qualified supplier of all kinds of building matierials in China. All products have been showed in Okorder website are under well controlled by okorder QC team.

All products had been produced under a clear quality standard and the quality is consistence among the shipments.

Okorder has already setted up more than 20 warehouses in different markets to show the products. You are convenient to know the products from your local place and it will help you to make decision easyly.  

②How to guarantee the quality of the products？

We have established a perfect quality management system，as for raw material and semi parts all are under strict quality test and we have a IQC system to control the purchases.

QC on site is very strict and all steps of process are measured per drawings. Before delivery, we set a OQC system to make sure each piece meet the standard of order.from design to delivery, 

③How long can we receive the product after purchase?

Lead time depending on order quanity, The normal order can be deliveried with 3 weeks.