Fiber Laser Cutting Equipment 400W
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 100 Sets per Month set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
400W Optical Fiber Laser Cutting Equipment
1. optical fiber;
2. 20m/min max cutting speed;
3. 1070nm laser wavelength;
4. 400W laser output power;
5. water cooling.
400W Optical Fiber Laser Cutting Equipment uses the best SPI laser source from British combined with precision mechanical drive systerm to ensure higher cutting speed and good cutting quality than traditional high-power CO2 laser cutting machine.
Advantages
1. 40%high electronic / optic convention rate, more efficiency ;
2. laser beam quality(M2<1.1 ) ,line width is less than 0.12mm;
3. 100,000 hours(more than 10 years ) service life without consumable parts;
4. 5-6 degrees electricity consumption per hour ,lower cost;
5. 20 meters per minute max cutting speed;
6. Fiber transmission ,maintainance-free;
7. Power consumption of whole cutting system is less than 2.5KW.
Applied area and materials
Widely used in metal crafts, metal products, precision machinery, auto parts, glasses, jewelry, nameplates, electronics, toys, advertising and other industries
Technical parameters
Model ML-WF400
Laser Medium Diode-pumped continuous Yb-Doped Fiber
Max Cutting Range 3000mm X 1500mm
Max Cutting Speed 20m/min (up to the material)
Cooling Way water cooling
Laser Wavelength 1070nm
Laser Output Power 400W
Laser Input Power <1.2KW
Minimum Line Width ≤0.12mm
Cutting Depth 0.2-3mm(up to the material)
Driving Way Imported Servo Motor
Tranmission Way Imported Ball Screw
Power Requirement 380V/50Hz/50A
Environment Temperature 5°C-35°C
Continuous Working Time 24 hours
Weight of Machine about 2000KG
External Dimension 2000mm×1800mm×1200mm(Optional)
After service terms
1. One years free warranty and lifetime maintenance;
2. We can assemble the machine in customer’s factory ,and train1-2 engineers for customer for free ,but the travelling expenses (tickets for arrive and depart) should on customer;
3. In One year of purchase, such as machine failure is a quality problem ,free maintenance. The service does not include human or environmental factors, customers fault and supplies section.
4. After One year warranty period, Herolaser should charge all the traveling expense if we go to customer’s place for problem solving .
- Q:What brand of laser welder is good, how much is the price?
- Laser welding machine which strong, new Hua Peng laser super Lan Xiang?. Do not want to blow, directly to the company interview machine.
- Q:Which material is suitable for welding of fiber laser welding machine?
- Fiber laser welding machines are mainly welded metal, such as stainless steel, copper, nickel and other metal materials.
- Q:What are the advantages and disadvantages of laser welding machines? What areas are they applicable to?
- Shortcomings are not convenient, a little thick products can not be welded (for ordinary laser welding), can only burn 0.2-0.4mm thick, melting depth is not very good, means that the degree of bonding is not very good. The utility model has the advantages of high accuracy, suitability for high requirement products and little heat influence. Apply to mold welding (plastic mold, press mold), precision stainless steel welding, etc..We produce precision welding (imitation laser welding), is a combination of the advantages of argon arc welding and laser welding, laser welding precision can reach the precision (0.2-2mm), the combination of degree can reach argon arc welding, small thermal effect, does not cause discoloration of the phenomenon of workpiece deformation.
- Q:If the safety energy is 1.6J, 48KW is adjusted to 4.5J, only press the OK, not press the SAVE machine to report the alarm, cause the capacitor to break down, the 1 power will be closed, the computer will save the 4.5J data Is it only human possibility to have such a problem? Has this power been scrapped?Equipment model sp90 rcu-f
- Never played this kind of machineAccording to common sense, general numerical control machine tool does not press save, won't save dataAnd you're power off. It's even more likely to save the data
- Q:What are the regulatory requirements for laser welding machines? What materials need to be prepared for export laser welding machine and do we need to do the inspection? The HS encoding is 8515800090.
- Congratulations, this code is not subject to inspection.Advantages of all ports to pay customs declaration, commodity inspection certificate of origin
- Q:I am a boy, 19 years old, engaged in laser welding work for half a year, listen to them all say radiation, I want to know how much harm to the body in the end?
- Well, let me tell you something. The following are the main points:The laser source emits a general contact laser can not, can not see, that almost no harm, but do note that non professionals don't contact laser source, otherwise it is very dangerous, as long as it is because of the invisibility and the energy is too high. In addition, the laser also belongs to the electromagnetic wave, but the welding machine uses the laser wave length to be very big, therefore does not have the ultraviolet ray and so on short wave long wave light radiation harm.Welding process should pay attention to ventilation, pay attention to dust, metal particles inhalation, pay attention to the protection of gas, are generally inert gas, although this type of gas is not toxic, but do not inhale too much.The best welding process from the welding position, while the radiation laser source welder almost no harm, but the welding process will lead to the other two kinds of radiation, ionizing radiation and stimulated radiation, the radiation induced by this lack of short wave, but for the eyes, the body is not a small impact, preferably away from the spot, don't look more.To sum up, if you are working at close range, it is better to bring breathing protectors, wear radiation protection clothing, with goggles.
- Q:Is laser welding machine universal with laser cutting machine?
- It's all the same. The switch is welded and changed into a cut, cut, change, welding
- Q:How much money a laser welder
- With more and 3C digital products and people's life and the rapid development of the society is higher, with the development of science and technology, towards the direction of the civilian life around smart devices derived social demand more and more fine, obviously visual effects brought by the technology, I believe that NOKIA Kingdom ran down with the apple boom, A new force suddenly rises. not accidental. Science and technology is still the leader of our life. In the future, 3C digital products will be upgraded in the direction of high integration and high precision, and the components in their products are becoming smaller and smaller, and the degree of electronic integration will be higher and higher. Therefore, the appearance, deformation and drawing force of the inner structure become more and more demanding for welding technology. Laser products are widely used in internal welding of 3C digital products because of their high energy, high precision and high directivity. At present, the production process of high-end digital equipment, laser welding technology plays an important role in the volume of product optimization and quality improvement, make the product more lightweight and slim, better stability etc..
- Q:How to adjust the light path of laser welding machine
- The spot should be rounded and positioned at the center of the aperture
- Q:I mean, which is more effective for flat panel solar energy, ultrasonic welding or laser welding? Domestic ultrasonic welding equipment has been better manufacturers?
- Ultrasonic contact welding, laser welding is a non-contact, no doubt the laser efficiency is high, because of the material itself by injecting contact type of thermal vibration complete heat, while the laser is injected into the energy directly, the energy injection ratio is not a grade, so only the laser efficiency is high, but the disadvantage is the limited laser in the infrared spectral characteristics, which is the limit of material
1. Manufacturer Overview |
|
|---|---|
| Location | Guangdong, China (Mainland) |
| Year Established | 2009 |
| Annual Output Value | US$2.5 Million - US$5 Million |
| Main Markets | North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe Central America Northern Europe Southern Europe South Asia |
| Company Certifications | ISO9001:2000 quality management system;Tax Registration Certificate(local tax); Model unit valuing quality and abiding by credit;Tax Registration Certificate(national tax) |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | shenzhen |
| Export Percentage | 31% - 40% |
| No.of Employees in Trade Department | |
| Language Spoken: | English, Chinese, Korean |
| b)Factory Information | |
| Factory Size: | 3,000-5,000 square meters |
| No. of Production Lines | 3 |
| Contract Manufacturing | OEM Service Offered Design Service Offered Buyer Label Offered |
| Product Price Range | Average |
Send your message to us
Fiber Laser Cutting Equipment 400W
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 100 Sets per Month set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
