Super Brightness 110LM/W 150W Outdoor LED Street lights
- Loading Port:
- Shenzhen
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED STREET LIGHT
LED STREET LIGHT WITH 4 MODULE
KEY DATA OF LED STREET LIGHT
Power Range:150W (OPTIONAL)
Color Temperature : 2500-6000K
Color Rendering Index :Ra Option: >65/>70/>75
Power Efficiency>90%
Light Efficiency :>110LM/W minimum
Working environment -60℃~70℃
IP rating- IP66,Working life >50000hours
With Housing ,With Fixture
AC 85-265V INPUT ,BRIDGELUX CHIPS
Application:
The street light is perfectlly for replace the traditional sodium lamp, HID lamp, Metallic lamp etc .
FAQ:
Why choose ALL IN ONE INTERGRATED SOLAR STREET LIGHT fom CNBM?
Q: What is the Operating temperature?
A: -20 to +40 degree Celsius
Q.What is the Light efficiency ?
A: Upto 100LM/W
Q:What is the starting time of LED Panel Light ?
A: Instant
Q:What is the Power Factor of Led Bulb ?
A:0.5 or 0.9
Q:What is the CRI ?
A: we offer CRI 65 (OPTIONAL 70RA, 80RA )
Q:What is the beam Angle?
A:270° beam angle, no dark space
Q:Any Mercury or Radiation or UV ?
A: NO
Q: Are your product IEC satisfied ?
A: YES
Q: How Much Energy It Can Save ?
A:Can save power over 80%
Q: Your Product 100% Real Wattage ?
A: Yes, 100% enough
Q:Which Kind of mount installation you can offer ?
A: Recessed type and Surfaced mounted Type
Q: How Long of Warranty
A: Minimum 2-3 years, and upto 5 years
- Q:Constraints on LED street lights
- According to the world financial crisis response, the central NDRC took 4 trillion together with the local financial support is expected to have 10 trillion funds to support enterprises, and improve the national transportation infrastructure. The Ministry of science and technology has launched the "Ten City, ten thousand" LED street lighting semiconductor lighting application project in the whole country. Under this strong east wind, the semiconductor lighting industry, which has been supported by the government, will be a great opportunity for development. Many enterprises are optimistic about the development of this sunrise industry, especially the obvious energy-saving advantages of semiconductor outdoor lighting. In the past 2 years, many enterprises have been put into production. They have made their products in the market by imitating, imitating and following the conventional lighting street lamps. Most products have varying degrees of problems.
- Q:Where are the batteries located in the installation of solar street lamps? Buried?
- The specific situation depends on the local decision. You are advised to use buried ground.
- Q:How high should the installation height of the LED street lamp be?
- In order to avoid glare, you can choose the f (d) (E), the installation height of street lights should not be less than 4.5m. The distance between the poles of the street lamp can be 25 to 30m, and the distance between the lamp posts entering the curve should be reduced appropriately.
- Q:Technical requirements for LED street lamps
- Market street lamp lens material for the improvement of optical materials, transmittance is more than 93%, high temperature -38 +90, anti ultraviolet UV ` etiolating rate for 30000 hours without change.3.LED street, the main lens for LED street lamp, spot is rectangular, the material is PMMA optical material, transmittance is more than 93%, high temperature -38 +90, anti UV UV ` etiolating rate for 30000 hours without change,
- Q:Does the LED street lamp 80W or 100W need to be compensated by a single light capacitor?
- Capacitor compensation is reactive power compensation or power factor compensation. The power system of electric equipment in use will produce reactive power, and is usually inductive, it will make use of the capacity of power efficiency, and by increasing the capacitance of the way properly in the system can be improved.
- Q:What ballast does the street lamp use?
- Inductance ballast, and generally use sodium lamp. The color of sodium lamp is yellow, not dazzling
- Q:What is the role of heat phase change material on a LED street light?
- I think that a product is not only from raw material to it, but also from the process of enterprises to work on each detail can be improved, with innovative thinking to consider the product of each process! Closely grasp the quality, seize the service. Treat the product, you want to treat their children, in order to make the product to perfection!
- Q:How much solar panels and batteries do 9W+10W solar light sources use for solar street lamps? LED
- Solar street lighting LED light source 9W+10W, how much solar panels and batteries, look at the following solar street lighting configuration method will understand.
- Q:What happens if the LED street is ungrounded? Is it a big problem?
- If a lamp holder is expensive, it should be sold for ten thousand yuan. If it is not damaged by grounding, it will be more harm than good.
- Q:What is the actual service life of the LED street lamp?
- In good heat dissipation, rated current work, with constant flow drive, high quality LED life up to 50 thousand small season
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Super Brightness 110LM/W 150W Outdoor LED Street lights
- Loading Port:
- Shenzhen
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 set
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords