Solar Aviation Obstruction Light
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 3000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Solar aviation obstruction light
Solar obstruction light
low intensity light
Specifications of Solar Aviation Obstruction Light
Description | Parameter |
International standard | ICAO(Aerodromes Annex 14)low intensity light TYPE-A |
Light source | LED |
Intensity | >10cd (flashing) |
Flash settings | 60time/min(other type can be customized) |
Horizontal divergence | 360° |
Vertical divergence | ≥10° |
LED lifetime | 100,000 hrs |
On/off level | 70/100 Lux |
Battery capacity | 3.6V/8AH (maintenance-free) NIMH |
Solar Battery power consumption | 1.8W |
Ambient temperature | -30°C~+70°C |
IP Protection | IP65 |
Continuous operation in rainy time | 20 days |
Mounting | 177mm (Dr) * 238mm(H) |
Visible distance | >3.6Km (atmospheric transparency=0.85) |
Weight | 2.3Kg |
Functions & Features
Based on LED technology
Aviation red type
Base material-- Die casting aluminum LM6
Lamp housing -- Polycarbonate with UV resistance
Bird spike
Built-in photocell
Steel wire is used to connect base to housing against falling in operation
Built in NIMH battery, ease for replacement
No RF-radiations, EMC compliant
Shockproof and corrosion resistance
Extremely Reliable -- Major maintenance cost saving
Very low power consumption -- Low energy cost Mount the solar light in the most suitable place such as under direct sunlight, to ensure its continuous operation.
Screw the lamp on the G3/4'' threaded pipe, which should be fixed on a smooth surface with enough mechanical strength (see mounting drawing).
When first operation, if the light does not light up in dark places, please put the light under direct sunlight for approx. 12 hrs.
Please keep the light in a very dry place, such as places with low humidity if do not use the light for a long time. Put the light under direct sunlight for three days every 40 days, to ensure the battery capacity.
Built in NIMH battery, after being used 450 times (15 months), the battery capacity is approx. 80% of previous capacities, at this moment, please replace the battery in time.
- Q: [emergency lights] emergency lights and ordinary lights what is the difference?
- In this type of emergency lighting system, all the complex electronic circuits in the lamps are omitted.
- Q: What's wrong with the emergency lights?
- You just press him to cancel the alarm, and if so
- Q: What's wrong with fire emergency lamp fault alarm?
- when the emergency response time of the emergency lamp is less than 30 minutes, the alarm rings and the malfunction indicator light is always on.
- Q: Under what circumstances can the vehicle turn on the emergency light?
- when towing a motor vehicle, both the tractor and the towed vehicle should open a hazard warning flash to remind the car that it is in a state of abnormal condition.
- Q: The emergency light went off suddenly, so it suddenly lit up
- Special case: when the grid voltage is below 187V, it also enters the emergency state.
- Q: Why does the emergency light appear when the power supply is normal?
- Emergency lamp control circuit is composed of Q3, Q5, Q7 and K G, in the key, no electricity, press the K key (open), Q5 saturation conduction, the collector current of Q5 by R12 to keep Q7 conduction
- Q: Installation of emergency lamp switch
- Also a line of fire, without switching directly to the emergency module, power side L, zero line N.
- Q: Where should fire emergency lights be installed?
- Three, auditorium, building area of more than 400m2 of the exhibition hall, business hall, multi-function hall and restaurant, building area of more than 200m2 studio;
- Q: How should the fire emergency light switch be connected?
- Emergency lighting has two kinds: 1, general lighting +UPS or EPS power supply, the light run line is connected with a power supply of ok2,
- Q: What is the power of emergency lighting?
- Use ambient temperature 25, 10, 10, and use ambient air relative humidity: < 90%
1. Manufacturer Overview
Location | Shanghai,China (Mainland) |
Year Established | 2009 |
Annual Output Value | US$50 Million - US$100 Million |
Main Markets | South America 3% Southeast Asia 6% Africa 8% Mid East 2% Western Europe 80% |
Company Certifications | ICAO Certification; CE Certificate; CE Certificate; CE Certificate |
2. Manufacturer Certificates
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability
a) Trade Capacity | |
Nearest Port | |
Export Percentage | 31% - 40% |
No.of Employees in Trade Department | |
Language Spoken: | English, Chinese |
b) Factory Information | |
Factory Size: | 5,000-10,000 square meters |
No. of Production Lines | Above 10 |
Contract Manufacturing | Design Service Offered |
Product Price Range |
Send your message to us
Solar Aviation Obstruction Light
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 3000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches