SAE 100 R7/EN856 R7 DN32
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
| DN | Hose I.D | Hose O.D | Working Pressure | Burst Pressure | Minimum Bend Radius | Weight | Length | |||
| inch | mm | mm | MPa | Psi | MPa | Psi | mm | kg/m | metres | |
| 3 | 1/8 | 3.3 | 8.5 | 17.2 | 2500 | 68.9 | 10000 | 13 | 0.037 | 20~100 |
| 5 | 3/16 | 4.8 | 10.8 | 20.7 | 3000 | 82.7 | 12000 | 20 | 0.068 | 20~100 |
| 6 | 1/4 | 6.4 | 13.0 | 20.7 | 3000 | 82.7 | 12000 | 33 | 0.085 | 20~100 |
| 8 | 5/16 | 7.9 | 15.1 | 17.2 | 2500 | 68.9 | 10000 | 46 | 0.103 | 20~100 |
| 10 | 3/8 | 9.5 | 17.0 | 15.5 | 2250 | 62.1 | 9000 | 51 | 0.141 | 20~100 |
| 13 | 1/2 | 12.7 | 20.7 | 13.8 | 2000 | 55.2 | 8000 | 76 | 0.210 | 20~100 |
| 19 | 3/4 | 19.0 | 27.1 | 8.6 | 1250 | 34.5 | 5000 | 127 | 0.287 | 20~100 |
| 25 | 1 | 25.4 | 34 | 6.9 | 1000 | 27.6 | 4000 | 203 | 0.542 | 20~100 |
- Q: Could you tell me the maximum pressure that the hose can bear?
- It doesn't make any sense because there is no higher hydraulic pump that can work above 35MP. Of course, there is a super high-pressure hydraulic hose, the working pressure of up to 80MP., using 6 layers of steel wire or more winding process.
- Q: High pressure hose K type joints KJR32 and KJR31.5D what is the difference between ah, please give us a answer,
- K type joint has the distinction between national standard and German standard. In general, 32 and 38 tubes are used more often. The joints used on 32 of the tubes are KJR32 and KJR31.5D. 38. The joints used on the tubes are KJR38 and KJR B40
- Q: The copper joint is leaking, and the tap water hose and copper joint are leaking
- 1, the expansion of aluminum pipe is not expanded, and re - do the side.2, copper joints are non-standard products, replaced by standard parts.
- Q: Can the natural gas hose not exceed 1.5 meters or 2 meters?
- The gas hose on the principle of not more than 1.2 meters, and regularly check the technical requirements, 1-2 must be replaced if the temporary gas can also be longer, if long-term use, as far as possible the use of metal pipe joint and the gas stove can also use metal hose, high safety factor.
- Q: What is a hose valve?
- Hose valve structure is simple, easy to overhaul and replace rubber hose, with a multi-purpose valve, hose valve can also replace the gate valve, stop valve, control valve use. Manual hose valve cold resistance and good wear resistance, according to the needs of chemical production users, using a variety of recipes produced.
- Q: How do the automobile rubber hoses combine with the quick couplings?
- The blue fast joint with fluorine is corresponding to the pressure, and the red fast joint with fluorine is corresponding to the high voltage
- Q: How to replace natural gas hose? Steps?
- Rubber products are rotten, especially the kitchen fume gas hose to erosion, and temperature will cause the hose and hose aging, but also bear the pressure of gas altar, for safety, or in accordance with the gas company's proposal to replace a 2 year.
- Q: How often do the oil - resistant rubber pipes undergo atmospheric pressure testing?
- Suction flat test: in the 1min vacuum, after maintaining 10min, with diameter of 0.9 times the diameter of the hose rolled over, check the degree of collapse of the hose. Some standards used to measure the rate of change in the outer diameter of the hose to indicate the extent of deformation of the hose.
- Q: What is the high and low pressure circuit of diesel engine?
- Low pressure means the fuel tank to the big pump (directly driven by the engine). High pressure means the large pump to the injector
- Q: How can the tightness of rubber tube and metal pipe joint be ensured?
- See how much your pipe diameter, diameter is around 10%, the metal pipe is inserted into the 2-3 rubber tube diameters, almost, don't worry, coupled with a hose clamp.
Send your message to us
SAE 100 R7/EN856 R7 DN32
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
