Rubber fuel hose cover braid,EPA,CARB approved high pressure
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 500000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
One Layer Steel Wire Rubber Braided Hose
Construction of one layer braided hose :
Inner tube: Oil resistant synthetic rubber
Reinforcement: 1 high tensile steel wire braided
Cover: Oil, abrasion and weather resistant synthetic rubber
Working temperature: -40C ~ +100C
Application of one layer braided hose
Widely used in all kinds of hydraulic engineering machinery, coal, petroleum chemical industry, construction, transportation and other industries
Specification of one layer braided hose
I.D | O. D | W.P | Test Pressure | B. P | Min. Bend Radius | Weight | ||
inch | mm | mm | psi | bar | bar | bar | mm | kg/m |
3/16 | 4.6 - 5.4 | 11.9 - 12.5 | 3045 | 210 | 420 | 840 | 89 | 0.2 |
1/4 | 6.2 - 7.0 | 12.7 -13.5 | 2784 | 192 | 384 | 768 | 102 | 0.25 |
5/16 | 7.7 - 8.5 | 14.6 - 15.4 | 2538 | 175 | 350 | 700 | 114 | 0.31 |
3/8 | 9.3 - 10.1 | 16.7 - 17.5 | 2277 | 157 | 314 | 628 | 127 | 0.36 |
1/2 | 12.3-13.5 | 19.8 - 20.6 | 2030 | 140 | 280 | 560 | 178 | 0.45 |
5/8 | 15.5-16.7 | 23.2 - 24.0 | 1523 | 105 | 210 | 420 | 203 | 0.52 |
3/4 | 18.6-19.8 | 26.9-27.7 | 1262 | 87 | 174 | 348 | 241 | 0.65 |
1 | 25.0-26.4 | 34.6-35.4 | 1015 | 70 | 140 | 280 | 305 | 0.91 |
1 1/4 | 31.4-33.0 | 43.3-44.1 | 624 | 43 | 86 | 172 | 419 | 1.3 |
1 1/2 | 37.7-39.3 | 49.7-50.5 | 508 | 35 | 70 | 140 | 508 | 1.7 |
2 | 50.4-52.0 | 62.4-63.2 | 377 | 26 | 52 | 104 | 635 | 2 |
- Q:What are the uses of rubber materials in automobiles?
- Hose for automobile. No matter what the car has a lot on the root rubber tube, such as radiator pipe, air-conditioning pipe, water pipe, gas pipe and so on, because these tubes need to experience vibration and bumps in the car environment, so we have various performance requirements, it must be used in automotive rubber parts.
- Q:What's the use of the rubber in the middle of the front axle?
- This is to balance the weight of the role, so that the transmission shaft transmission more smoothly.
- Q:What material is the rubber hose on the tank truck?
- The tanker can be used: carbon steel, stainless steel, plastic, glass, steel lining plastic cans (PP), following to tank tanker common material to share.
- Q:How does the new car remove the smell of rubber in the car?
- The so-called "strange smell" is a new car leather, paint, adhesives, rubber and plastic and other materials generated pollution, such as formaldehyde, benzene, acetone, TVOC and other harmful substances.
- Q:What is the function of the automobile exhaust lug?
- The rubber suspension lug of the automobile exhaust cylinder is used for preventing the vibration of the vehicle from being too large.
- Q:How about a rubber bar in a lathe?
- Because this material is the most soft, with high-speed steel lathe tool grinding sharp point processing, open wide and shallow groove, bad lubricating bottom light chip, cut with white steel knife knife cutter head 0.2mm wide angle needle like
- Q:Can the waterproof sealing strip for sunroof glass be changed?
- Pay attention to the aging and deformation of the slide rail.Skylights used for a long time, in its slide, gap, usually there will be a lot of sand deposition, if not cleaned regularly, it will wear sunroof components.Operation 1: for electric sunroof, in the bumpy road, it is better not to open the sunroof completely, otherwise it will cause the deformation of the relative parts because of the vibration between the skylight and the slide rail, and even damage the motor.Operation 2: clean drain pipe and proper lubrication rail every two years.Should be cleaned regularly around the slide, usually in the use of 2 to 3 months, the rail with gauze stained with clean water cleaning, and after wiping clean, apply a little oil or butter on it.Operation 3: when the vehicle is ready for long-term parking, it is necessary to thoroughly clean the skylight track with talcum powder, so as to avoid the long time and cause the chemical reaction of the sealing ring in the air to cause the ageing.
- Q:Please help to understand what parts of the car are used rubber parts, must be more specific Oh!
- The screw or the bracket is connected with the place with damping function, such as steel plate fixed position; the need to seal the place, such as doors and windows on the edge of the body is sealed, such as valve, gearbox, engine upper and lower cover connection; and tire, tubing, pipe etc.
- Q:What are the mechanisms of the action of the eye plate and the cutting ring of the concrete pump?
- Cost reduction function: because of the function of the glasses plate and the cutting ring, they replace the wear between the feed port and the material cylinder, and protect the service life of the two.
- Q:How to properly clean automobile engines, rubber and tires and other parts?
- In addition to the car body needs regular cleaning, beauty, and other parts also need to wash beauty, but less than the body appearance, the use of detergent should also be different. The engine and chassis, the use of higher pH alkaline cleaning agent; for automotive glass, containing high amount of isopropanol freshener use should be away from the fire source; of the automotive electric circuit, safe cleaning and beautifying solvent type, high volatile, can keep the insulation performance of electric circuit, can not use water cleaning beauty agent; automobile brake system, with the rapid evaporation of the solvent degreasing agent.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Rubber fuel hose cover braid,EPA,CARB approved high pressure
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 500000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches