Reach Lift Truck- CQD20H
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Model | | CQD20 | CQD20H |
Power | | electric | electric |
Operator type | | seated | seated |
Capacity/rated load | Q(kg) | 2000 | 2000 |
Lift height | h3(mm) | 3000/5000/6200/7400 | 8000/8600/9500 |
Load centre distance | c(mm) | 500 | 500 |
Load distance,centre of driva axie to fork | x(mm) | 380 | 320 |
Wheelbase | y(mm) | 1500 | 1500 |
Service weight | kg | 3300/3700/3800/3900 | 4100/4150/4240 |
Tyres type | | polyurethane | polyurethane |
Drive wheel | mm | φ406×152 | φ406×152 |
Fork wheel | mm | φ340×104 | φ340×104 |
Wheels,number front rear(x=driven wheels) | | 2.1 | 2.1 |
Height,mast lowered | h1(mm) | 2086/2240/2740/3190 | 3390/3590/3890 |
Height,mast extended | h4(mm) | 3800/5800/7000/8200 | 8800/9400/10300 |
Height of overhead guard(cabin) | h6(mm) | 2200 | 2200 |
Seat height/stand height | h7(mm) | 1068 | 1068 |
Overall length | l1(mm) | 2440 | 2510 |
Length(barring fork) | l2(mm) | 1950 | 1950 |
Overall width | b1(mm) | 1260 | 1510 |
Fork dimensions | s/e/l(mm) | 40/120/1070 | 40/120/1070 |
Fork carriage width | b3(mm) | 928 | 928 |
Distance between fork-arms | b5(mm) | 680 | 850 |
Recah distance | l4(mm) | 600 | 600 |
Aisle width for pallets 1000×1200 crossways | Ast(mm) | 2880 | 2880 |
Aisle width for pallets 800×1200 lengthways | Ast(mm) | 2930 | 2930 |
Turning radius | Wa(mm) | 1820 | 1820 |
Travel speed ,laden/unladen | Km/h | 8/8.3 | 8/8.3 |
Lift speed, laden/unladen | m/s | 0.19/0.2 | 0.19/0.2 |
Lowering speed, laden/unladen | m/s | 0.5/0.4 | 0.5/0.4 |
Acceleration time, laden/unladen | s | 4.8,4.3 | 4.8,4.3 |
Service brake | | hydraulic | hydraulic |
Battery voltage,nominal capacity K5 | V/Ah | 48/500 | 48/500 |
Battery weight | kg | 860 | 860 |
Battery dimensions l/w/h | mm | 1220x344x727 | 1220x344x727 |
Type of drive control | | DC/AC | DC/AC |
--------
1) Joystick hydraulic controller
2) LCD display and camera (LCD for cold storage are available)
3) Height selection and height position system
4) EX explosion proof type
--------
STABILITY
●The large and strong chassis ensures sufficient stability of the forklift.
●The max lifting height can reach 9.5 meter.
●Use “H” type mast steel is imported from Germany enhance the use time and stability.
●Large and comfortable compartment with adjustable seat reflects a concept of ergonomic design.
●Use double controllers to realize stepless speed regulation of both lifting and travelling.
SAFETY AND HGH EFFICIENCY
●Have safety travelling speed limited device in the mast. Travelling speed will automatic lowering when forks height is up 5M.
●Full hydraulic steering system makes turning easy and flexible.
●Adopts hydraulic brake for two front wheel and electric brake for electric brake for driving motor, offer simple operation for travelling and braking .
●Integrated design of driving and steering system without chain transmission, resolve the problems of chain fall-off caused by chain transmission.
EASY MAINTENANCE
●Battery changing offers two type methods:
(1)Side way battery changing by a trolley
(2) Automatic push- out and pull-in function by a simple battery handle controller
●Bolt fixed back cover is easy to open for daily maintenance.
- Q: Where can I get a forklift
- There are so many places in dongguan that can be verified, but all of them are exam-oriented teaching. It's a long way from the factory job. I don't have a license to find a job, Be sure to find a professional place to learn about fork and warehouse training.
- Q: What if the forklift oil is burned and the oil is burned
- First open the hood, and pull out the distributor of the central high tension line, from the cylinder block there is 6 or 7 mm, switch on the ignition switch, turn the crankshaft, view the high tension line to produce edm. If there is no spark, there is a fault in the low voltage circuit with short circuit, broken circuit or ignition coil and central high voltage line. Interchangeably disconnecting, closing contact, observing the meter pointer reading. If the current meter instructs the discharge 3 ~ 5A and the intermittent oscillations, the low voltage circuit is good, the fault occurs in the high voltage circuit. If the current meter pointer does not oscillate, it indicates that the low voltage circuit is broken. If discharge of large current of electric current meter, indicates that there is an iron failure in low voltage circuit. If the spark is too strong, it creates a blue and white spark. The low voltage circuit and the ignition coil are good, the fault is in the distributor and the spark plug high voltage circuit. From the top to remove the high tension line head, spark plug rocking-turn crankshaft to the body tries to fire, such as no fire should check the distributor rotor, distributor cap, and whether high subsection line leakage, is when the spark ignition timing shall be checked and the performance of the spark plug.
- Q: The advantages and disadvantages of exhaust and exhaust in the forklift truck
- Imported forklifts are used for exhaust, and of course the cost will increase. The reason is that the height of the exhaust is exactly the same as in the middle of the body, which causes the pollution to spread to the human body, causing damage. The exhaust will blow up the dust of the ground and cause pollution. Are you satisfied with the answer?
- Q: There are several forklift drivers in China
- Widely used in the national economy, such as station, port, airport, factory, warehouse, etc., it is an efficient equipment for mechanized loading and unloading, stacking and short distance transportation
- Q: What is the main risk of forklift property insurance?
- The forklift is generally covered by special vehicles, and the main risk is the risk of the car It's just that the insurance clauses are different from that of the general car. In fact, if it is a forklift, it can be covered by business insurance. That's cheaper than car insurance, and more.
- Q: A manual forklift oil leak, what if you can't get up?
- The relief valve spring failed Work pressure relief valve is used to adjust system, keep the pressure in a certain range, prevent due to overloading, the hydraulic cylinder piston to the limit position or other reasons caused by the damage of parts of hydraulic system. The relief valve is mainly composed of spring force to press the ball to achieve the purpose of open and close of valve position. When the hydraulic pump output pressure in excess of the prescribed value, high pressure oil pressure overcomes the part of the oil in the high pressure relief valve oil spill tank back. When the oil reaches specified value, the spring under the action of prestressing force in itself, the steel ball pressure on the valve position, the relief valve closed. If the relief valve spring failure, hydraulic oil under pressure from below system regulation would have forced from ball valve position into the oil spill: and cause of leakage, make the system failure. Repairs must be replaced the spring, and then using the adjusting screw to adjust the spring pressure to the provisions of the 14 mpa. The adjustment according to the 600 mm from the center of the load in the demand of load 7.5 t of the goods, when goods in seems up with locking nut locking, the pressure is needed to adjust the pressure.
- Q: Hydraulic forklift and what hydraulic oil
- Winter 46 # hydraulic oil summer 32 # hydraulic oil In the summer, you can use the 668 # hydraulic oil for the summer
- Q: What happens when you do the force forklift
- If it's a manual, it could be a disjoint. Or pressure plate.Your car (dangling from side to side of the wheel) is supposed to be the shaft of the door.
- Q: Where should I take the special operation equipment certificate for the forklift?
- I got a preliminary certificate for forklift in a free training session for the community summer vacation. There is no working experience. Big companies hire forklifts for special operations.
- Q: What is the difference between a forklift and an operation certificate
- The certificate that must be dealt with in the labor bureau is the proof that the laborer has the knowledge and skills necessary to engage in a particular profession. It is laborer qualification certificate of employment, office, practice, is unit of choose and employ persons is the main basis of recruitment, hiring workers, and overseas employment, foreign labor service cooperation, personnel skill levels notary valid documents. Mainly used to adjust wages.
Send your message to us
Reach Lift Truck- CQD20H
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
