PVC Pressure Pipe 123 Made in China on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
2.Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: What is the method of making large diameter rubber joint?
- Rubber joint also known as shock absorber, shock absorber throat, the main function is to shock absorption, noise reduction, protection of the pipeline, compensation pipeline expansion, cold caused by displacement.Its structure: both ends are two carbon steel flanges, the middle is rubber shock absorption part.
- Q: What's the metal hose for fire fighting?
- 1 the metal hose is made of 1Cr18Ni9Ti stainless steel, and has strong corrosion resistance.The 2. hose tube is made of thin wall stainless steel tube. It has strong flexibility, flexibility, strong bending and vibration resistance, and reinforced protection of woven mesh sleeve, so that it has higher bearing capacity.The connection of the ends of the 3. flexible pipes can be made into other connecting ways except the thread and the flange standard, so that the connection and the use are convenient.4. the product is not only suitable for mating with rotating joint, but also widely used in soft connection of many kinds of fluid medium transportation.
- Q: Plastic metal hose connector model specification, who knows?
- Package type plastic hose is many, the most common is the DPJ thread joint, DPN joint, DKJ card connector, DGJ self fixed joints, Glenn joints, fittings
- Q: What are the matters that should be paid attention to when installing rubber hose joint in water pump?
- Installation notes:?1, Shanghai rubber pipe joint non super displacement limit at the time of installation;?, 2 installation bolts to be symmetric, gradually tightening pressure, to prevent local leakage;?3, flat, suspended, vertical installation of rubber pipe joint, actual axial displacement pressure rubber tube joints should be smaller than the pipe support, otherwise should install anti pull off device to prevent work pressure;?4, rubber pipe joints should be away from heat, ozone, no strong radiation light. Exposure and use of media that do not meet the requirements of the product;?5, rubber pipe joint in the transportation, loading and unloading, installation, no sharp instruments across the surface of the sealing surface;
- Q: How to distinguish the true and false corrosion resistant rubber soft joint?
- Method for distinguishing true and false corrosion resistant rubber soft joint:Put the rubber joint in the corrosive liquid which needs to pass. One day, 24h can see that the swelling ratio is not more than 5%!
- Q: High pressure hose crimping connector, pressed on what position can effectively prevent the head off?
- High pressure hose crimping connector, pressed on what position can effectively prevent the head off, need professional technology, you can find professional installation.If the burst pressure is greater than the standard 4 times the work pressure, even the qualified hose.
- Q: How to replace natural gas hose? Steps?
- Replace the natural gas hose first pressure relief, and resolutely put an end to the operation with pressure;According to the connection way of the hose, if it is O ring sealed, just tighten it directly;If it is cone thread, it can be wrapped with raw material tape or sealant.
- Q: What material is the rubber joint used in the desulfurization pipeline? What's the difference?
- The desulfurization pipeline can be used with three yuan EPDM rubber ring joint, and PN4-6 is no problem.Generally, the desulfurization pipeline is weak acid base.
- Q: The selection of valves and fittings has the following requirements
- The joint of the valve is threaded with an internal thread, so that the connection in the installation is easier to select transition joints.
- Q: Faucet hose connection problem
- It is recommended to buy two kinds of hard bellows, soft metal hoses (black silk stripes). When the metal hose is installed, the joint should be horizontal or vertical, and the water pipe and gasket are not sealed properly. It will leak and do not need to be eaten with raw material.
Send your message to us
PVC Pressure Pipe 123 Made in China on Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
