Plastic Tubes 2024 PPR Pipe for Landscape Irrigation Application
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Overview
1) Cold / hot water supply facilities for public buildings
2) Food, chemical, electronic industry pipeline networks; Such as Pipeline networks for transporting all kinds of corrosive liquids
3) Drinking water production system pipeline networks; Such as Pure water and mineral water
4) Air conditioning facility pipelines
5) Compressed gas pipeline networks for industry
6) Pipeline networks for swimming pools
7) Pipeline networks for solar energy facilities
8) Agriculture and garden production transporting systems
Advantages
1)Light weight, convenient to transport and handle
2)High strength
3)less resistance
4)Corrosion resistance
5)Sound insulation
6)Easy to install
7)long lifespan
8)low cost
9)Recyclable: thereby benefiting the environment
10)OEM/ODM welcome standards
11)Reliable installation
Product Description
Pressure | Size(mm) | Pressure | Size(mm) |
PN1.25MPA | 20*2.0 |
PN1.6MPA | 20*2.3 |
25*2.3 | 25*2.8 | ||
32*2.9 | 32*3.6 | ||
40*3.7 | 40*4.5 | ||
50*4.6 | 50*5.6 | ||
63*5.8 | 63*7.1 | ||
75*6.8 | 75*8.4 | ||
90*8.2 | 90*10.1 | ||
110*10.0 | 110*12.3 |
Product Show
FAQ
Q: How do you guarantee the quality of your product?
A: Every process will be checked by responsible QC which insures every product's quality.
Q: How much is your delivery time?
A: Normally within 30 days of receipt of LC original or prepayment, but mostly according to the specific requirements or the quantity
Q: I need sample, could you support?
A: We can supply you with the sample for free, but the delivery charges will be covered by our customers. For avoiding the misunderstanding, it is appreciated if you can provide the International Express Account for Freight Collect. Also you can have a visit to us, welcome to CNBM!
- Q: I was given an Mellita One:One coffee maker and I noticed when inter running it through a cycle it would leak all the water through the bottom. So I opened it up and noticed that one part of waterpump tubing is not attached so I attempted to use super glue to reattach it. So do you think it will hold during use?
- the chemicals would be poisonous.Put a small hose clamp that size or make one using a soft but firm wire around twice twist ends to draw tight.Caution: A wire too hard twisted too tight may bust the plastic inside tubing.Will be fine if pipe you are putting on is steel A light stainless steel alloy is best to eliminate corrosion.
- Q: 1995 Honda Civic1.6L V-TECH Motor v4This is a good car there is only one problem the engine overheated and melted the plug wires. I replaced the Part but needs to have plug tubes cleaned out due to melted plastic. I need help from a mechanic expert about this as i do not have the tools to do the job but i could get them tools.
- unless the melted plastic interferes with the new tubes or spark plugs, there is no reason to try to clean the plastic out. if you can get the plugs out and put new ones in and put the wires on with no problem then just leave the residue in there...it won't hurt anything. you are talking about a major undertaking if you want to remove the tubes to clean them. The valve cover has to come off to get to the tubes and the tubes are usually pressed into the base of the head so the head may have to come off as well. you might want to just pull the wires and try to use a rat-tail file down into the tube to scrape away the excess plastic on the inside of the tube (leave the spark plugs in place if you try this so the filings don't get into the engine). Then use a vacuum cleaner to suck the filings out of the tube before you put the wires back on. I'd recommend that as the best thing to do if the burnt plastic is a concern. Otherwise, I'd leave it alone. hope that helps
- Q: My bridge had broken and I got someone to make me a new one, but when I reviewed it over, I noticed they moved the plastic tube to the bottom of the violin. Should I not worry about it or have someone fix it?
- Does the bridge have a protective cover glued to it under the string - it's called a parchment? Or does the bridge have an insert in it, usually made from Ebony? If either of these is a yes, you don't need the tube. If the answer was no to both, the tube should probably be there to protect the bridge from the string cutting in. Here is a pic of the two possibilities I've mentioned.
- Q: Can plastic tubes be used for electrical conduits?
- Yes, plastic tubes can be used for electrical conduits. They are commonly used in residential and commercial settings to safely route and protect electrical wires and cables. Plastic conduits offer advantages such as flexibility, durability, and resistance to corrosion and moisture. However, it is important to ensure that the specific type of plastic tube being used meets the required electrical code standards for safety.
- Q: Are plastic tubes available in flame-retardant options?
- Yes, plastic tubes are available in flame-retardant options. These tubes are specially designed and treated to have a reduced flammability and slow down the spread of fire.
- Q: Can plastic tubes be used for bird feeders?
- Yes, plastic tubes can be used for bird feeders. They are commonly used to create tube-style bird feeders, where bird seed is placed inside the tube and birds can access it through small feeding ports. Plastic tubes are lightweight, durable, and easy to clean, making them a popular choice for bird enthusiasts.
- Q: Can plastic tubes be used for drainage systems?
- Yes, plastic tubes can be used for drainage systems. They are commonly used in residential, commercial, and industrial applications due to their durability, flexibility, and resistance to corrosion. Plastic tubes are also lightweight, easy to install, and cost-effective compared to other materials such as metal or concrete.
- Q: Are plastic tubes suitable for outdoor signage?
- No, plastic tubes are not suitable for outdoor signage as they may not withstand harsh weather conditions and can easily fade or deteriorate over time.
- Q: Can plastic tubes be used for hydroponic lines?
- Yes, plastic tubes can be used for hydroponic lines. They are commonly used for delivering water, nutrients, and oxygen to plants grown in hydroponic systems. Plastic tubes are lightweight, flexible, and easy to install, making them a popular choice for hydroponic growers.
- Q: What are the different end types available for plastic tubes?
- There are several different end types available for plastic tubes, including open-ended, closed-ended, threaded, flanged, barbed, and push-fit.
Send your message to us
Plastic Tubes 2024 PPR Pipe for Landscape Irrigation Application
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
