Oil Water Resistant Working Industrial Safety Boot
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pair
- Supply Capability:
- 10000 pair/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Application of Working Safety Boot
Construction industry,Mining industry,Oil field,Chemical Industry,
Scientific Research,Pharmaceuticals Industry ,Marine Fishery,
Agriculture,Breeding Industry,Gardening,etc.
2. Specification of Working Safety Boot
PVC boots,protection of toes: metal tip resistant to: A shock of 200J;Pressure of 1500kg;Sole: metal plate resistant to 1100N.
water repellent; antistatic, puncture resistant,SJ Flex/composite sport S3 SRC, shock proof, antislip, plaxtic steel toe cap, S1P PU/PU sole, Low-density polyurethane and profile of the heel.
Upper:：PVC black,1.6mm thickness
Front:Thickness:1.2mm
Lining:No lining
Back:Thickness: 1.0mm Heel energy absorption
Insole:Antioil, absorbent, resistant to abrasion and to exfoliation; abrasion resistance.Premounlded and breathable.
Midsole:Anti-perforation
Outsole:Anti-perforation
Outsole:Put outsole;0upper anti-perforation; antistatic double density polyurethane injected directly on the upper, shock proof, anti-slip SRC level, mineral oils and industry acids.
Environment used:Petrochemical industry; manufacturing; airport; outdoor; automobile repaired; special force; aviation and shipping etc.
3. Images of Working Safety Boot
4. Packaging & Shipping of Working Safety Boot
Precaution and maintenance:
To extend the life of your shoes, we recommend to clean them regularly and to product them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source.
Instructions for storage:
To be stored in its original packing in a dry place, sheltered from sun light.
CE EN ISO20345
EN ISO 20345 codes explained:
SB indicates minimum protection under EN ISO 20345 with 200 joule impact toecap;
SBP add anti-penetration midsole or insole;
S1 as SB, plus anti-static properties and enclosed energy absorbent heel;
S1P as S1, plus anti-penetration midsole or insole;
S2 as S1, plus resistance to water penetration and absorption;
S3 as S2, plus anti-penetration midsole or insole and cleated outsole;
S4 indicates antistatic, heel energy absorption, fuel & oil resistant
S5 as S4, plus penetration resistant above
Slip resistance has its own codes:
SRA indicates slip resistance on ceramic surface with dilute soap;
SRB tested on steel with glycerol;
SRC tested in both conditions
SJ certification include:CE S3; JIS(Japan); AS/NZS2210:3(Aust); Gost-R(Russia); ASTM(USA)
5. FAQ of Working Safety Boot
Q: How to get a quotation and start business relationship with your company?
A: Please send us email and our sales representive will contact you as soon as we receive your email.
Q: How to receive a price quotaion in the shortest time?
A: When you send us an enquiry, please kindly make sure all the details, such as the mateiral, product size, surface treatment and packaging are mentioned.
Q: How to start a custom project with your company?
A: Please send us your design drawings or original samples so that we can offer a quotation first. If all details are confirmed, we will arrange the sample making.
Q: What types of payment terms do you accept?
A: Currently, the payment terms we accept are T/T (30% before production, 70% against B/L copy) and irrevocable L/C at sight.
- Q: What are the national standards for the implementation of shoes for labor insurance?
- The puncture proof safety shoes standard is GB21148-2007. This standard requires that the puncture strength is greater than or equal to 1100N to be qualified products. It is suitable for mines, fire protection, construction, forestry, cold work, machinery industry, etc..
- Q: How to do the Baotou steel foot of safety shoes?
- Of course, may also be the number is too small, but look from your description, your husband can wear, it should not be like this, safety shoes, foot wear is small, the biggest danger is such heavy hit, because the distance is too close to the ladle head toe, it is easy to cause harm to your toes, Qiang Liejian on a replacement a good pair of safety shoes as soon as possible, it is best not to buy too cheap, 100 yuan!
- Q: What are the specifications of labor insurance shoes for labor insurance products?
- Test machine is provided with a pressing plate provided with a test for a nail, nail test cut tip head, the nail head hardness should be greater than 60HRC. Placing the sole sample on the chassis of the test machine, the position allows the test pins to pierce through the outsole. The test pin pierces the sole at a rate of 10 mm/min + 3 mm/min until the penetration is achieved, recording the maximum force required. Each shoe is selected on 4 points for testing (at least 1 points in the heel), each point is no less than 30mm, and the distance from the inner bottom edge is greater than 10 mm. The bottom of the block should be pierced between the blocks. The 2 points in the 4 points shall be tested at a distance of 10-15 mm from the edge of the base wall. If humidity affects the result, the sole shall be dipped in deionized water of 20 + 2 DEG C before testing, 16 + 1h.
- Q: What are the advantages of using injection end safety shoes, and why?
- It is obvious that the PU material is safe and the sole is very light, so the safety soles required by the customers can definitely meet the lighter requirements.
- Q: Bacou safety shoes shelf life
- Anti crash safety shoes: Baotou has high safety performance. It is suitable for metallurgy, mining, forestry, port, loading and unloading, quarrying, machinery, building, petroleum, chemical industry, etc..
- Q: Classification of safety shoes soles and their respective features
- Bottom: TPR (T, P, R thermal plastic rubber) TPR is a general term of generalized, including TPV, SEBS, SBS, TPO, TPU, EVA and other products.TPR sole is mainly refers to the modified material commonly known as SBS (a TPR application belongs to the material) is the special material.TPR for shoes a new type of polymer material for shoes mainly manufactured by thermoplastic SBS, rubber properties for processing and recycling, according to thermoplastic plastic is wear-resistant, easy shaping, low price; safety shoes TPR base material has the characteristics of lightweight, comfortable, high elasticity, good air permeability, easy staining high strength, especially excellent low temperature resistance, high friction coefficient, adhesion is strong. But the contact oil solvent will slip. Heavy material, poor abrasion (no wear), flexibility is poor, poor bending (without folding), shock absorption ability is poor, poor ventilation can use ordinary plastic. The forming machine Made of injection molding, extrusion molding, blow molding, rubber products. TPR pellets after hot melt injection molding, forming molecules in emission movement
- Q: What are the differences between anti break shoes, safety shoes, shoes for labor protection, and steel head shoes? How to use and maintain?
- Often wipe, keep clean, often polish shoes, can extend the use of safety shoes.Specification for preventing oil area of oil or oil spills places safety shoes; waterproof shoes for ground water or water workplace; proof shoes for foot protection of low temperature workers, to avoid frostbite. Anti stab shoes for foot protection, to prevent a variety of sharp objects stabbed. The main function of anti squashy shoes is anti falling by foot.
- Q: Which brand of safety shoes is better?
- After selected safety shoes styles and colors, first check whether the safety shoe materials materials required. The sole materials for safety are rubber, plastic, rubber and plastics, polyurethane, natural leather and so on. When shopping, please check whether the bottom is smooth and the patterns are clear.
- Q: Which brand is the panoply safety shoes?
- This is a French brand, but now a lot of safety shoes are basically domestic manufacturers, OEM very much, safety shoes we also often help the many brands of OEM, you can get on with secul shield safety shoes to look at the top, English is sikidu. In the Pearl River Delta, relatively large numbers of users have been using it!
- Q: What are the main functions of anti static and anti crash safety shoes?
- . There are many kinds of shoes, such as toe protection, anti puncture, insulation, acid and alkali resistance shoes. They are shoes used to protect feet and legs from predictable damage in different working situations. I hope my answer will satisfy you and accept it,
Send your message to us
Oil Water Resistant Working Industrial Safety Boot
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pair
- Supply Capability:
- 10000 pair/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
