Push on Plastic Pipe Fittings - New DIN Standard PPR Pipe Fittings for Hot and Cold Drinking Water Supply
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1500 set
- Supply Capability:
- 30000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
PPR pipe fittings
1.It is used in Industrial fields and Agriculture fields
2.Beauty appearance.
3.Thermal insulation and energy saving.
4.Easy installation
5.Excellent heat resistance and pressure resistance
Our advantages
(1) High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius.
(2) Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe.
(3) Corrosion Resistant: resist chemical matters or electron chemical corrosion.
(4) Lower Installation Costs: light weight and ease of installation can reduce installation costs by as much as 50% over metal piping system.
(5) Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes.
(6) Long Life: more than 50 years under normal conditions.
(7) Recycled and Environment-friendly
PPR pipe and fitting size
1.25MPa | 1.6MPa | 2.0MPa | 2.5MPa | |
Outer | Wall | Wall | Wall | Wall |
Diameter | Thickness | Thickness | Thickness | Thickness |
dn(mm) | en (mm) | en (mm) | en (mm) | en (mm) |
20 | 2.0 | 2.3 | 2.8 | 3.4 |
25 | 2.3 | 2.8 | 3.5 | 4.2 |
32 | 2.9 | 3.6 | 4.4 | 5.4 |
40 | 3.7 | 4.5 | 5.5 | 6.7 |
50 | 4.6 | 5.6 | 6.9 | 8.3 |
63 | 5.8 | 7.1 | 8.6 | 10.5 |
75 | 6.8 | 8.4 | 10.1 | 12.5 |
90 | 8.2 | 10.1 | 12.3 | 15.0 |
110 | 10 | 12.3 | 15.1 | 18.3 |
160 | 14.6 | 17.9 | 21.9 | 26.6 |
- Q: Can plastic pipe fittings be used in oil and gas applications?
- Yes, plastic pipe fittings can be used in oil and gas applications. They are commonly used in low-pressure systems, such as water and wastewater treatment plants, where they offer benefits like corrosion resistance, ease of installation, and cost-effectiveness. However, in high-pressure and high-temperature applications, metal fittings are typically preferred due to their superior strength and durability.
- Q: How do plastic pipe fittings differ from metal pipe fittings?
- Plastic pipe fittings differ from metal pipe fittings primarily in terms of material composition and durability. While metal fittings are typically made of materials like brass, copper, or stainless steel, plastic fittings are made of PVC (polyvinyl chloride), CPVC (chlorinated polyvinyl chloride), or PEX (cross-linked polyethylene). Plastic fittings are generally more affordable, lightweight, and corrosion-resistant compared to metal fittings. Additionally, plastic fittings are easier to install as they often require simple solvent welding or compression techniques, whereas metal fittings may require soldering or threading. However, metal fittings are generally stronger and more durable, making them suitable for high-pressure or high-temperature applications.
- Q: May I ask whether the steel mesh skeleton plastic composite pipe can be installed as the same PE
- Wire mesh frame plastic (polyethylene) composite pipe with high strength steel wire winding distribution in pipes for reinforced skeleton, the outer and inner layers with high density polyethylene matrix, and the new environmental protection hot melt adhesive composite by continuous extrusion tube
- Q: Can plastic pipe fittings be used for ductwork installations?
- No, plastic pipe fittings are typically not suitable for ductwork installations. Ductwork requires materials that are specifically designed to handle the air flow and pressure requirements, along with being fire-resistant. Plastic pipe fittings may not meet these necessary criteria and could pose a safety risk if used for ductwork installations.
- Q: Can plastic pipe fittings be used for chemical transportation?
- Plastic pipe fittings can be used for chemical transportation, but it depends on the type of chemical being transported. Certain plastic materials, such as PVC or CPVC, are resistant to a wide range of chemicals and can be suitable for transporting many types of chemicals. However, for more aggressive or corrosive chemicals, it is important to select the appropriate plastic material that is specifically designed to handle those substances. Additionally, it is crucial to consider factors like temperature, pressure, and compatibility with the specific chemical to ensure safe and effective transportation.
- Q: Can plastic pipe fittings be used for geothermal heating systems?
- Yes, plastic pipe fittings can be used for geothermal heating systems. Plastic pipe fittings are commonly used in these systems due to their durability, corrosion resistance, and flexibility. They are able to withstand the high temperatures and pressures associated with geothermal heating systems, making them a suitable choice for this application.
- Q: Can plastic pipe fittings be used for gas supply?
- No, plastic pipe fittings should not be used for gas supply. Gas supply requires fittings that are specifically designed and approved for gas applications, such as those made of metal materials like brass or steel. Using plastic fittings for gas supply can pose a safety risk due to the potential for leaks or failures.
- Q: Can plastic pipe fittings be used for stormwater management systems?
- Yes, plastic pipe fittings can be used for stormwater management systems. Plastic fittings are commonly used in such systems due to their durability, corrosion resistance, and ease of installation. They are also often preferred for their cost-effectiveness and ability to withstand various weather conditions.
- Q: Are plastic pipe fittings resistant to scale build-up?
- Yes, plastic pipe fittings are generally resistant to scale build-up.
- Q: Can plastic pipe fittings be used in fire suppression systems?
- No, plastic pipe fittings generally cannot be used in fire suppression systems as they lack the necessary fire resistance and may melt or fail under high temperatures, compromising the effectiveness and safety of the system.
Send your message to us
Push on Plastic Pipe Fittings - New DIN Standard PPR Pipe Fittings for Hot and Cold Drinking Water Supply
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1500 set
- Supply Capability:
- 30000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
