Product Description:

This mini IR 24key RGB controller adoptsthe advanced micro control unit.Its mainly used to controlled all kinds ofconstant voltage led lights,such as:LED source, LED strips,led wall washer,wallGlass curtain lights,etc.It integrated with low cost,easy connection,simple manipulationand others advantages.User can choose the mode of fade, strobe,Blasting flash,flicker,andother Static color model. What’s more, this controller have the characteristicsof small volume, easy to carry,etc, its popular amount the many markets.

Technical Parameters:

  ● Working temperature：-20-60℃

  ● Input voltage：DC5-12V

  ● Output：3 circuit

  ● Connection mode：Common anode

● controller size：L40.0×W12.0×H5mm

● remote size：L85×W52×H7mm

● Net weight：35g

● Gross weight：40g

● Static power consumption：<0.5W

● Output current：<2A*3A(each circuit)

● Output power： 5V:<30W,12V:<72W

Direction for use:

●  Connectthe load wire at first,followingby the power wire; Please ensure short circuit can notoccurbetween connecting wire before you turn onthe power；

●  Operation:you will receive infrared remote control in front of infrared receiver toensure that there is no barrier between the remote controller and receiver.

● The key functions are as below:

Direction: When switching to the four dynamicmode (7 color jump change, Strobe flash, 7 color fade change, 3 color jump), the button of “Brightness +”/ “Brightness-” means the speed of light change is up/ down, there are 32 step in all.

Steps for reorder the sequencing:

In the light on station, continuous to pressthe OFF key for 5 times(the light OFF),than press the Static straw yellowkey and change to “+RGB” sequencing,and then press the “ON” key to save thesequencing.

In the light on station, continuous to pressthe OFF key for 5 times(the light OFF),than press the Staticsky blue key and change to “+GRB” sequencing,and thenpress the “ON” key to save the sequencing.

In the light on station, continuous to pressthe OFF key for 5 times(the light OFF),than press the Staticpurple key and change to “+BRG” sequencing,and then press the “ON”key to save the sequencing.

Typical Applications:

cautions

1、Thisproducts Input voltage is DC5V~12V,other input voltage are not allowed.

2、Leadwire should be connected correctly,according to the wire color and the connectingdiagram offers

3、Overloadare prohibited.