Met Coke of CSR 62
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Guarantee | |
Moisture (ARB) | 5% max |
Ash (DB) | 12.50% max |
Volatile Matter (DB) | 1.4% max |
Sulphur (DB) | 0.7% max |
Phosphorus (DB) | 0.035% max |
CSR | 62% min |
CRI | 28% max |
M40 | 82% min |
M10 | 8% max |
Size 30-90 mm | 90% min |
+90 mm | 5% max |
-30mm | 5% max |
Mean Size | 52 mm |
MET COKE:
Ash(DB) | Sulphur (DB) | CSR
| Size 30-90mm | +90mm
| -30mm | |
Guarantee | 12.5%max | 0.7%max | 62%min | 90%min | 5%max | 5%max |
NUT COKE:
Parameters | Ash(DB) | Sulphur (DB) | Volatile Matter (DB) | Size 20-50mm | +50mm
| -20mm |
Guarantee | 12.5%max | 0.65%max | 1.5%max | 90%min | 5%max | 5%max |
COKE BREEZE:
Parameters | Ash(DB) | (ARB)
| Volatile Matter (DB) | Fix Carbon (DB) | Size 3-6mm
|
+6mm |
-3mm |
Guarantee | 12.5%max | 15%max | 1.5%max | 83%min | 90%min | 5%max | 5%max |
Used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, compound and the function of stock column frame.
NUT COKE
Quality | Quality guaranteed | Rejection limits |
Moisture (As receive basis) | 7% max | --- |
Ash (dry basis) | 12.5% max | >13.5% |
Volatile Matter (dry basis) | 1.5% max | >1.8% |
Sulphur (dry basis) | 0.65% max | >0.75% |
Phosphorus (dry basis) | 0.035%max | >0.045% |
Size 10—30mm | 90%min |
|
-10mm | 5%max | >8% |
+30 | 5%max | >8% |
Quality | Quality guaranteed |
Moisture (As receive basis) | 7% max |
Ash (dry basis) | 12.5% max |
Volatile Matter (dry basis) | 1.5% max |
Sulphur (dry basis) | 0.65% max |
Phosphorus (dry basis) | 0.018%max |
Size 20—50mm | 90%min |
-20mm | 5%max |
+50 | 5%max |
- Q:What is the difference between the industrial analysis of coke and the industrial analysis of coal samples
- Coke GB/T 1996-2003, volatile coke is the most difficult to do
- Q:Coke is how to make it? What is the use?
- The production process has the following procedures:The preparation of coking coal is called coal preparation, which is prepared from various kinds of cleaned coal (or raw coal with low ash content), which is made up of coal, which has the advantages of high accuracy, good particle size, uniform quality and meeting the requirements of coking. Generally include: coal unloading, storage and mixing, mixing, crushing and mixing, and the preparation of coal to coke oven coal storage tower. In cold regions, there should be thawing and freezing equipment. To improve the quality of coke, we must pay enough attention to coal preparation. The coal blending is good, the accuracy of coal blending is improved, the fluctuation of coal quality is minimal, and the chemical composition and the physical mechanical property of the coke are ensured to stabilize the coke quality. Therefore, the coal blending equipment must be accurately according to the given value of coal blending; coal blending tank to be uniform continuous coal. In addition to the impurities in the coal, water can not be too high. The reasonable crushing of coal can effectively improve the mechanical strength of coke. According to the specific situation, the most suitable grinding particle size should be determined.
- Q:The total amount of heat released by the fully burnt 200g coke is 60% by mass of 10kg water absorption [q coke =3.0 * 107J/kg, C water =4.2 * 103J/ (kg = C)], q:(1) how much heat is absorbed by water?(2) if the initial temperature of water is 10 degrees C, then, after absorbing heat, the temperature will rise to how much?
- At a standard atmospheric pressure, the boiling point is 100 DEG C, the temperature of the water rises to a temperature of 100 DEG C, and the temperature will not change,So the water temperature can be increased to 100;Answer: (1) the heat absorbed by water is 3.6 * 106J;(2) after absorbing heat, the temperature of the water will rise to about 100 degrees centigrade
- Q:What is the difference between metallurgical coke and chemical coke
- Chemical coke:Chemical gasification coke, the intensity of the requirements are not strict, but requires a good reaction, high ash melting point; calcium carbide production requirements for coke to improve the fixed carbon contentQuality index of coke
- Q:Coking coal, coke, coal, steam coal what is the difference?
- Coal is used to generate electricity, which is used to burn coalPower coal is generally only coal
- Q:What is the effect of coke moisture on the blast furnace?
- 1, a large number of high coke moisture (when the rain open storage of coke in blast furnace smelting coke), if not timely load back down, will cause a relatively large impact on the furnace, coke is better then no timely adjusting load will cause heat phenomenon.
- Q:F.C Ash S V.M H2O SizeMore than 85 less than 15 less than 8 less than 0.8 less than 1.5 10-70mm over 90%,I would like to ask, what is the size of the corresponding coke? Metallurgical coke or something else, there is no relevant information about, thank youF.C = 85, Ash = 15, H2O = 8, S = 0.8, V.M = 1.5, Size:10-70mm 90% and above, so clear, like the product, the current price?
- Metallurgical coke indicators are as follows:A metallurgical coke: fixed carbon, 86%; calorific value 7300cal/kg; ash < 12%; volatile < 1.9%; all 5% "0.6%" water; sulfur;
- Q:What kind of coke is needed for smelting special steel
- 3) skeleton: smelting process in blast furnace is gas rise and decline occurred in the opposite charge of movement and interaction, the core permeability is the key operation of blast furnace. In the upper column, gas flow distribution of coke layer; in the middle of the column material, the coke from the skeleton effect, support has been melting the iron ore, the normal gas rise; in the lower column, high temperature in the solid massive existing coke and has become liquid hot metal and slag mixed together, become loose skeleton gas rising and falling iron and slag.
- Q:What does the M40% and M25% mean in the analysis of coke?
- (1) crushing strength (shatter strength): the ability of a certain particle size coal sample to fall under the condition of free fall.
- Q:Purpose of using coke in iron making raw materials
- The coke can provide the heat required for the reaction and has the reducibility
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Met Coke of CSR 62
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
