Met Coke of 40 to 100 mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 1000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Metallurgical Coke of Met Coke of 40 to 100 mm Description：
Coke physical properties including coke sieve grouped into truth, coke, coke powder density depending on the relative density of density, coke, coke gas porosity, thermal conductivity for the heat capacity of coke, coke, coke, coke ignition temperature, coke thermal expansion coefficient of thermal stress, coke shrinkage rate and coke, coke resistivity permeability, etc.
Gasification coke is dedicated to the production of coke gas.Mainly used for fixed bed solid slag discharge coke gas generator, as a feedstock for gasification, in the production of combustible component for CO and H2 gas.
2. Main Features of the Metallurgical Coke of Met Coke of 40 to 100 mm ：
• Quality assurance
• Mutual benefit
• Preferential price
• Various choice
3. Metallurgical Coke of Met Coke of 40 to 100 mm Images:
4. Metallurgical Coke of Met Coke of 40 to 100 mm Specification:
Guarantee | Rejection | |
Total Moisture (As received basis) | 5% max | |
Ash (dry basis) | 12.5% max | > 13.5% |
Volatile Matter (dry basis) | 1.5% max | > 1.8% |
Sulphur (dry basis) | 0.65% max | > 0.75% |
Phosphorus (dry basis) | 0.035% max | > 0.045% |
M10 | 7% max | > 9% |
M40 | 84% min | ＜82% |
CSR | 65% min | ＜63% |
CRI | 25% max | > 27% |
Size 30-90 mm | 90% min | |
+90 mm | 5% max | > 8% |
-30mm | 5% max | > 8% |
5. FAQ
C+O2→CO2+408177KJ
CO2+C→2CO-162142KJ
C+H2O→CO+H2-118628KJ
C+2H2O→CO2+2H2-75115KJ
- Q: Coke is how to make it? What is the use?
- The production process has the following procedures:The preparation of coking coal is called coal preparation, which is prepared from various kinds of cleaned coal (or raw coal with low ash content), which is made up of coal, which has the advantages of high accuracy, good particle size, uniform quality and meeting the requirements of coking. Generally include: coal unloading, storage and mixing, mixing, crushing and mixing, and the preparation of coal to coke oven coal storage tower. In cold regions, there should be thawing and freezing equipment. To improve the quality of coke, we must pay enough attention to coal preparation. The coal blending is good, the accuracy of coal blending is improved, the fluctuation of coal quality is minimal, and the chemical composition and the physical mechanical property of the coke are ensured to stabilize the coke quality. Therefore, the coal blending equipment must be accurately according to the given value of coal blending; coal blending tank to be uniform continuous coal. In addition to the impurities in the coal, water can not be too high. The reasonable crushing of coal can effectively improve the mechanical strength of coke. According to the specific situation, the most suitable grinding particle size should be determined.
- Q: Ask: coking coke tower tower and what is the relationship?If you can give a working principle to explain what is better!Coking tower in oil coking plant
- Coking plant production capacity on the exclusion of the tower is also on the two: first, the coal tower; the two is coke bin;
- Q: What is the sample quantity of coke moisture test? What is the test time? How many degrees? That is the national standard.
- Test procedureDetermination of total moistureA, said the samples size less than 13mm with pre dried and weighed for about 500g (referred to 1g), smooth specimen,B, a sample tray is placed on the 170 a 180 C in the drying box, LH removed after cooling, weighing 5min. C, check dryness, each time 10min, until the two consecutive quality difference in LG, calculate the quality of the last time.Determination of moisture content of samplesA, with the weighing bottle drying to constant quality in advance and has quickly called weighing samples size less than 0.2mm uniform mixing of the 1 + 0.05g (referred to 0.0002g), flat on the weighing bottle.B, will be filled with a sample of the bottle to be placed in the 105-110 drying box drying 1H, remove the weighing bottle immediately covered with lid, put into the dryer to cool to room temperature (about 20min), weighing.C, check of dry, insult 15min, until two consecutive poor quality in 0.001g, take the quality of the last calculation, if quality is weight gain first calculated on the basis of.Five, the calculation of test resultsCalculation of total moisture content according to formula (L):
- Q: Coking coal, coke, coal, steam coal what is the difference?
- Coke is used for blast furnace ironmaking and iron ore in the steel furnace to play the role of the heating skeleton to support reducing agent
- Q: What kind of coke is needed for smelting special steel
- It is necessary to add coke, pellet, sinter ore, ore and other materials into the blast furnace in a certain proportion, batch and sequence, and then to produce molten iron in the reducing atmosphere of the blast furnace
- Q: Why is coke used in blast furnace steelmaking?Why not use coal?
- (2) reduction: high temperature gas generated in coke combustion in the raceway, passed to the material in the process of heat rising, the endothermic reaction and coke formation, CO and H2, then CO and iron oxide in iron ore reduction reaction is transformed into metallic iron.(3) the role of the skeleton: the blast furnace smelting process occurs in the movement and interaction between the rising of the gas and the falling of the charge. The pellets, coke, iron ore, ore and other materials according to a certain proportion, and batch sequence into a blast furnace, blast furnace smelting in reducing atmosphere under the hot metal, after providing to the steelmaking plant of the steel-making.
- Q: Coke and coal is one thing
- Coke is bituminous coal under the condition of isolated air, heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, solidification, shrinkage and other stages of the final coke, this process is called high temperature coking (high temperature carbonization).Coke is a deep processing of coal products.
- Q: How to remove the bottom of coke steel
- Two, with cooking shovel (Mason's Pihui knife is best) to remove surface soft.Three, the same with a spade close to the bottom of the pot to eradicate. Until the last thing left is black.Four, wash the metal wire ball friction force discoloration, and always use water to clean out the dirt.
- Q: Coke crushing, coke plant equipment, coke jaw crusher, coke crushing equipment prices, manufacturers offer? How is the output of these equipments?
- It is a solid product of high temperature carbonization, the main component of which is carbon, which is a kind of crack and irregular pore structure.
- Q: What is the difference between coke and coking coal
- Coking coal is a kind of bituminous coal with a high degree of deterioration, and the thermal stability of the resultant colloid is good when the coke is produced separately. The block size of the coke is large, the crack is small and the strength is high
Send your message to us
Met Coke of 40 to 100 mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 1000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
