MET COKE of 30-90mm
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
CNBM MET COKE of 30-90mm
We export many kinds of coke, such as metallurgical coke (met coke) of 40-100 mm, theNUT coke of 20 to 50 mm, coke breeze of 3 to 6 mm, and so on. The main source isShanxi coking plant.
Coke is mainly used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, compound and the function of stock column frame.
Very unequal distribution of coking coal resources in our country, mainly concentrated in north China, east China.The shanxi coking coal resources reserves largest, find out resource is 155.184 billion tons, accounting for 55.35% of the national reserves.Xishan coal and electricity, LuAn ring can have more abundant coking coal reserves.
Coking coal is a major production of steel material, especially high-quality coking coal, the lack of domestic resources, domestic high-quality coking coal resources often comes from imports.
The intended use of CNBM MET COKE of 30-90mm
Our CNBM MET COKE of 30-90mm are ideal for:
· Power plant
· Steel mills
The advantages of CNBM MET COKE of 30 -90mm
Not only are OKorder's CNBM MET COKE of 30 -90mm of the highest quality and reliability, we are able to quickly ship orders within 20 days of receiving a deposit or original L/C.
Main features of CNBM MET COKE of 30 -90mm
l Unique Frame Design For Easy Installation
l High energy conversion efficiency
l Reliable performance
FAQ:
Q:
How long can we receive the product after purchase?
A: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 7 to 10 workdays.
Metallurgical Coke of Coke 30 -90mm Images:
Specifications:
Parameters | Guarantee |
Moisture (ARB) | 5% max |
Ash (DB) | 12.50% max |
Volatile Matter (DB) | 1.4% max |
Sulphur (DB) | 0.7% max |
Phosphorus (DB) | 0.035% max |
CSR | 62% min |
CRI | 28% max |
M40 | 82% min |
M10 | 8% max |
Size 40-100 mm | 90% min |
+100 mm | 5% max |
-40mm | 5% max |
Mean Size | 58 mm |
At present, the main customers are NOBLEGROUP, IMR and so on. Our main overseas markets are Japan, India, Brazil, Iran,Vietnam, and so on.Let me know your demands then I can check availability.
- Q: What is the concept, relationship and difference between coke and coke? The main difference and contact, thank you
- Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke ". Since more than 90% of metallurgical coke is used for blast furnace ironmaking, it is often referred to as coke. Coke is a special and molten iron cupola coke. Coke is the main fuel cupola molten iron. Its role is to melt the burden and make the hot metal overheating, the support column to maintain good ventilation. Therefore, the foundry coke should have large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.
- Q: Which heroes know, please give the source of the data.
- From the production equipment and technology of the popular view, a ton of coke oven gas produces about 400 cubic meters, of which about 200 cubic meters of coke oven returned through the pipeline used for coking heat source, the remaining more than and 200 cubic meters was emptying, "or the lantern".
- Q: How to calculate the average particle size of coke
- That is, "(volume) of the table of the percentage, in addition to the corresponding boundary value", these values are added, then the countdown. For example, the boundary 0 to 1 has a value of 10%, between 1 and 2, and between 2 and 4 has a value of 40%, and between 4 and 8, then D (3,2) = / (0.1/0.5 + 0.3/1.5 + 0.4/3 + 0.2/6) = 1/ (+ + 0.2 + + + 0.13 + +) = 1/0.56 = = =
- Q: Effect of coal fineness on coke
- The fineness of pulverized coal, which is less than 3mm of grain size, has a great influence on the quality of coke. The fineness of coal is one of the indexes of coal blending quality. In the production, when determining the fineness of coal, we should consider two aspects of the quality uniformity and production operation.
- Q: Coke boiler belongs to coal-fired boiler
- They produce coke boiler to clean fuel production to reduce emissions as the main content.
- Q: What is the phosphorus content in coke
- Generally, the phosphorus content of coke is low, about 0.02%.The bituminous coal is heated to 950-1050 DEG C under the condition of air isolation
- Q: I see that there are metallurgical coke and coke on the Internet, what is the difference between them (I hope to be able to say in detail) and a level of two points, how is this going on?.. Where is the quality of coke in China? Hunan good coke plant which? Although the problem is a little bit more, I hope that insiders can give some useful information. Extremely grateful.
- The following indexes: Metallurgical Coke metallurgical coke: fixed carbon, 86%; calorific value 7300cal/kg; ash < 12%; volatile < 1.9%; all 5% "0.6%" water; sulfur; two metallurgical coke: fixed carbon 84.5-85%; calorific value 7000cal/kg; ash < 13.5%; volatile "1.9% full" water; 6%; "three sulfur 0.7%; metallurgical coke: fixed carbon 83-84.5%; calorific value 6500cal/kg; ash < 15%; volatile < 1.9%; all 6%" 1% "water; sulfur;
- Q: What's the connection between coking coal and coke
- The coke can be obtained with the advantages of large grain size, few cracks and high crushing strength, and the abrasion resistance is good. But the expansion pressure, the coke pushing difficulties must be allocated to coal, lean coal, in order to improve the operating conditions and improve the quality of coke. Coking coal can play the role of coke skeleton and relieve shrinkage stress, so as to improve the mechanical strength of coke.
- Q: Why in the blast furnace ironmaking with coke instead of charcoal why coke can produce heat to improve the heat of the furnace how to produceWhy in the blast furnace ironmaking with coke instead of charcoal why coke can produce heat to improve the heat of the furnace how to produce
- The role of coke in the blast furnace: 1 reducing agent 2 heating agent 3 skeleton role. Combined with the effect of coke in the blast furnace can know compared with coke instead of charcoal. The coke oven gas is produced high calorific value of fuel, and is an important raw material for organic synthesis industry.
- Q: Natural gas can replace coke smelting pig iron
- No, it's not just the temperature. It takes the chemical reaction of carbon and iron oxide to produce iron.Chemical equation: C+Fe 3O4 - Fe+CO2
Send your message to us
MET COKE of 30-90mm
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords