General Information of Masking Tape MY690

 1. PACKING:

Core I.D.: 3” (76mm +/- 1)

Jumbo Roll：990mm x 1800m; 80 rolls/20' without pallets

Cut Roll: As per customer’s requirements; fistly several rolls shrink together, then certain quantities into a carton, finally be loaded into container with or without pallets.

 2. Application:

Interior paint masking, silk screening, Light duty packaging, bundling, holding, splicing &Tabbing, painting autos, boats, and Electrical industry.

 3. Temperature resistance: 60-70°C

 4. Colors available: White, light yellow, yellow, blue, black, red, green etc.

 5. We could supply OEM service such as core printing with customer's LOGO; round label with design of customers etc.

 6. Special requirements will be satisfied after communications

Technical Data of Masking Tape MY690

CONSTRUCTION:
Carrier: Crepe Paper
Adhesive: Rubber based adhesive

TYPICAL PHYSICAL PROPERTIES of Masking Tape MY690

Total Thickness (adhesives + carrier): 145 +/- 5 micron
Initial Tack (steel ball):  8 #
180 Peel Adhesion (to steel):  6.5 +/- 0.5 N/25mm
Holding Power:  4 hrs
Tensile Strength: 65 +/- 5 N/25mm
Elongation: 10%
Temperature resistance: 60-70°C

Remarks of Masking Tape MY690

1. The data above are typical results and subject to change without notice.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

1. The products should be stored at room temperature and be kept away wet and/or heat source.

2. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

3. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.