Led rgb twinkling dance floor for events/parties
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 set
- Supply Capability:
- 500 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Led rgb twinkling dance floor
Technical parameter
| Input Voltage | 36V |
| Power Consumption | 400W |
Program | 7 programs |
Consumption per panel | 5W(2ft*2ft) 10W(2ft*4ft) |
LED Quantity | 16pieces(2ft*2ft) and 32pieces(2ft*4ft) |
| Functions | Twinkling Effect,Speed adjusted by remote controller |
| Material | Arylic(Surface), ABS board(middle of the panel), aluminum(undersurface) |
| LED Color | High-quality W/R/G/B/Y.Single Color |
| Size per panel | 2ft*2ft(604*604*30mm) and 2ft*4ft(604*1210*30mm) |
| Weight | 7kg(2ft*2ft) 13kg(2ft*4ft) |
Remote Key:
1. Red On | 2. Green On | 3. Blue On |
4. Yellow On | 5. Purple On | 6. Cyan On |
7. White On | 8. Twinkle(adjustable) | 9. Function(as below) |
10. Speed - | 11. Speed + | 12. Reset |
13. Brightness - | 14. Brightness + | 15. Turn Off |
With a pure gloss finish and twinkling lights dazzing you and your guest,
you can be sure to make a huge impression with this style of dance floor.
Suitable for weddings,party,event,and other special show.
No cables and tools required while setting up.
Quick and easy to lay.
Signal receiver,power supply and wireless remote
2x4ft panel,2x2ft panel:
Flight case for packing:
Our commitment:
-We only sell quality products.
-Factory sell directly,has price advantage.
-We have perfect after-sales service team.
Our team:
1, Reply your inquiry in 24working hours.
2, Deliver the goods to our customers all over the world with speed and precision.
3, Provide our clients with favorable price and high quality goods.
4, To offer excellent service to our customers is our final goal.
- Q: The beam lamp is not insured. How can it be blocked?
- The power is out of order, or somewhere the line is disconnected
- Q: teach me how to use 240 console, simultaneous control PA lamp and beam light. Finally, I hope to teach me programming
- It's not difficult, but it can be programmed. Stage shows and weddings are enough. White point is cross storage.
- Q: How to control the beam light controller?
- Each function corresponds to a channel, the channel is the corresponding program, composed of numerical value, the control channel value is how much control procedures travel, beam light is precisely positioned
- Q: What's the price of the beam200 beam lamp and how much is it?
- Domestic, different manufacturers, things are not the same, the price is not the same, look at what kind of configuration you want.
- Q: If the light beam has a horizontal vertical velocity channel, it can adjust the speed of the XY axis
- Well done can be very similar, but after all it is simulated
- Q: why does not have the effect to the beam lamp, asks the detailed explanation
- When someone says you are demanding and says you do, maybe you will be single in the future. They tend to mean that you can't afford what you want. But what do people say? Is it important? The more people look down on you, the more you want.
- Q: Light gate leakage, for what reason, thank you master pointing!
- If you are debugging a new light, it should be stroboscopic blade blocked, did not go to the location, can not turn off the light.
- Q: Method for connecting sound control of sunlight 512 console and light beam lamp
- Check the signal line card faucet is consistent, methods: a LEDpar lamp is set to 001, with 512 separate console test will know the signal line arrangement is correct, if the LED par is eight channel, second address code is 009 or more than 009 address code, after a good tune, find the corresponding channel in the 512 console can control the lights, and 512 channel console must address code corresponding to the lamp does not light, otherwise.
- Q: How can I control the beam light?
- There's a switch. Just put that on;Sound controller
- Q: With DISCO 240 light control, can you set the 4 beam lights of the same size (for example, 001), set the 8 lights on the same code (for example, 017). How is the light control station connected to the beam light? How far away is it? What's the connection? It's only 1 meters in line.
- With DISCO 240 light control, can you set the 4 beam lights of the same size (for example, 001), set the 8 lights on the same code (for example, 017).
Send your message to us
Led rgb twinkling dance floor for events/parties
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 set
- Supply Capability:
- 500 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
