LED PAR38 LAMP WITH BEST PERFORMANCE THREE YEARS WARRANTY
- Ref Price:
-
$4.60 - 7.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 500000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED PAR LAMP PAR 38
General Introduction of PAR LAMP
White Surface E27 Base Plastic Lamp Par38 Led Bulb
Specifications: | |
Bulb | PAR38 |
LED Counts | SMD LEDs |
Lamp type | LED Warm White/Neutral White/Daylight |
Light Output | 1380 Lumen |
Beam Angle | 25° |
Body Materials | Plastic with Aluminum inside |
Voltage | AC90-250V |
Wattage | 17W |
CRI | 80 |
Life Span | 30000hrs |
Primary Application | Indoor Floodlight/reflect lamp |
DIMENSIONS | |
Maximum Overall Length (MOL) |
|
Bulb Diameter (DIA) | |
Special Features not for use on dimmers | |
Feature of PAR LAMP
-PC lens with high light transmittance
-Aluminum heat sink with special technology on surface for cooling
-No screws design and un-disassembled
-Long lifetime 25,000 Hrs,2-years warranty
Switch off the electricity replacing the lamp.
Keep a way from direct sunshine and high temperature.
Be good at heat-releasing
Highly shock and vibration resistant
FEATURES OF PAR LAMP
FAQ:
Why choose LIGHT fom CNBM?
Q: What is the Operating temperature?
A: -20 to +40 degree Celsius
Q.What is the Light efficiency ?
A: Upto 100LM/W
Q:What is the starting time of LED Light ?
A: Instant
Q:What is the Power Factor of Led Bulb ?
A:0.5 or 0.9
Q:What is the CRI ?
A: we offer CRI 65 (OPTIONAL 70RA, 80RA )
Q:What is the beam Angle?
A:270° beam angle, no dark space
Q:Any Mercury or Radiation or UV ?
A: NO
Q: Are your product IEC satisfied ?
A: YES
Q: How Much Energy It Can Save ?
A:Can save power over 80%
Q: Your Product 100% Real Wattage ?
A: Yes, 100% enough
Q:Which Kind of mount installation you can offer ?
A: Recessed type and Surfaced mounted Type
Q: How Long of Warranty
A: Minimum 2-3 years, and upto 5 years
- Q: Shoot the light is led lights
- Lamp are ordinary lamp and LED lamp, but with the development of science and technology, the ordinary lamp has been basically eliminated, so now on the market said to shoot the light is narrow sense points to the LED lamp
- Q: 1. I bought the LED tube light, there is some light is driven with constant current, while the input voltage is 220 v, but tend to be low voltage dc output voltage, there are some inserts the 220 v can directly, didn't see any of the constant current drive, so is built into the still say there are two kinds of LED tube light, is a kind of the working voltage of the dc low voltage, a kind of ac 220 v. 2. About the LED tube light, dimmer, I already according to one of the LED constant current drive found the corresponding LED light, that if I was the LED directly to the adjustable light can directly replace the LED constant current drive.
- Do you want to light is adjustable brightness or light color? If it is a variable degree of directly replace driver IC is ok, if is the color temperature of the lamp bead can not suitable for you. 3. Your driver output voltage and current, the series multiple lamp after share current, light can't take much more
- Q: What about the size of the led light?
- Size of the LED lamp Are generally as the lamp wattage increases with the increase. The general 3 w hole between 60 mm to 85 mm, according to the wattage increases with the increasing.
- Q: A transformer with 10 led to shoot the light, to buy what kind of transformer?
- 10 only 3 w LED series, high efficiency, but high output voltage, 9.6 V * 10 = 96 V, filter capacitance pressure is high also, only 1 circuit, all is not lit up. Current 300 ma, power = 96 v to 102 v * 300 ma = 28.8 to 30.6 W, considering the power reserve, it is recommended to use 40 W constant current source.
- Q: The led will shoot the lamp to warm the white heat?
- Fever is for all the led lamp bead inevitable problems, lamps and lanterns is inevitable. So has the corresponding cooling measures or properly reduce the working current of the led to reduce fever, to extend and embody the characteristics of led high brightness, long life
- Q: Best lighting distance of LED to shoot the light
- LED lamp its rays distance depends on the light Angle. The power relationship between size is not very big.
- Q: The led lamp is suitable for reading?
- To reading lamp can choose color is white, 3 w shoot the light is illuminated distance is limited, additional LED shoot the light when there is a shadow of the fluorescent lamp is not. Your room how many lamp?
- Q: Does the LED light have to be transformer?
- It's not called transformer. LED lights need drive power, has permanently flow drive and resistance capacity drive, usually 220 v50hz ac power input.
- Q: LED to shoot the light flash when open, a period of time is normal
- The LED lamp LED lamp is to use leds as a light source to shoot the light. Traditional lamp used more halogen lamp, luminous efficiency is lower, more power consumption and environment temperature rise by illuminate, service life is short. LED light source on the luminous principle, energy-saving, environmental protection level are much better than traditional lighting lamps and lanterns. And LED the unidirectional formed to shoot the light distribution of the perfect support. LED lamp is mainly composed of shell, light bead, aluminum version of the driver
- Q: Led to shoot the light is broken how to change
- Nails dig is commonly used in the edge of the lamp tube (position) linking to the smallpox condole top, a little bit hard pull became one! Two used to locate the wire spring clip!
Send your message to us
LED PAR38 LAMP WITH BEST PERFORMANCE THREE YEARS WARRANTY
- Ref Price:
-
$4.60 - 7.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 500000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
