Induction Lamp
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 Sets pc
- Supply Capability:
- 10000 Sets per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High-Efficiency 165W High-Frequency Induction Lamp
High-efficiency and energy-saving
Green and environmental -protection.
165W High-frequency induction lamp
1. High-efficiency and energy-saving
The lighting efficiency of the system reaches up to 110 lm /w.And the power factor reaches up to 99%.The energy consumption of idle work is reduced.It saves above 90% energy when compared with incandescent lamp and saves above 50% energy when compared with high pressure mercury lamp and high pressure sodium lamp.
2. Green and environmental –protection.
Solid amalgam and lead free glass are adopted .Above 99% materials can be recycled.which meets the international requirement of environmental protection.
3. Excellent color rendering
The color rendering index is large than 80.And the light color is mild,which can present the natural color of objects.
4. Optional color temperature
The color temperature ranges from 2700K-6500k.And there are also many patterns of colorful light bulb.
5. Have no strobe
It works in 2.65Mhz high frequency ,which will not produce harm of stroboscopic effect .
6.Little light evanescence
The luminous flux maintenance factor of 2000 hours is 95%.The luminous flux maintenance factor of 20000 hours is 80%.The luminous flux maintenance factor of 30000 hours of 75%.
7.Ultra-long service life
The aging of lamp filament and electrode sputter are the main reason in limiting the service life tional light source .The Electrodeless lamp has no lamp filament and electrode inside and frequency electromagnetic induction coupling way to excite to shine.The working life is above 30000 hours.
8.Instant –on and restart
It is instant lighted.And the switching number reaches up to 200000.
9.Large range of working temperature
The amalgam technology is adopted and it needs no further warm-up.It can start-up and work normally in the temperature ranging from -40 to -55.
10.Good performance of shake-proof and explosion-proof
The shake resistance performance is excellent and the lighting spot can be any place because there is no lamp filament and electrode in the ligh bulb.Moreover ,the surface temperature is very low when it is lighted,which is suitable for the place
- Q: How to adjust light in fluorescent lamp
- The dimming of fluorescent lamp is a method of frequency modulation dimming. The power adjustment of the fluorescent light source is realized by the characteristics of the voltage conversion ratio and frequency correlation of the high frequency transformer in the ballast. The higher the frequency of the high frequency transformer in the ballast, the lower the output voltage of the high frequency transformer; the lower the frequency of the high frequency transformer, the higher the output voltage of the high-frequency transformer. The control circuit can adjust the oscillation frequency of the high frequency transformer, and can adjust the output luminous flux of the fluorescent lamp.
- Q: Is the energy-saving lamp a fluorescent lamp?
- The three primary colors of energy-saving lamps, high efficiency energy-saving fluorescent lamp, also known as compact fluorescent lamps and integrated fluorescent lamp, refers to the fluorescent lamp and ballast (ballast) are combined into a whole lighting equipment, the effective life of eight thousand hours or more.
- Q: Are there any differences between fluorescent lamps and energy-saving lamps? What are the differences between them?
- Three color phosphor (by fluorescent powder red, green and blue three kinds of rare earth according to a certain proportion) energy-saving lamps made of incandescent lamp, because the light efficiency is higher than two times, light or attention all over the world. A typical hot cathode fluorescent lamp is coated with phosphor powder on the inner wall of a glass tube and emits visible light under ultraviolet excitation.
- Q: What are the types of fluorescent lamps?
- Relationship between the diameter of fluorescent lamp tube and its electrical parameters:1, fluorescent tube, the smaller the diameter, the higher the light efficiency, the better power-saving effect2. The smaller the diameter of the fluorescent tube, the higher the ignition voltage of the glow lamp, the higher the technical performance requirements of the ballastThe diameter is larger than T8 (T8) fluorescent lamp starter ignition voltage is low. Compared with 220V, 50Hz AC, with starting ignition voltage less than 1/2 power supply voltage law. Can use inductive ballast, for starting and lighting operation.
- Q: What's the difference between an energy-saving fluorescent lamp and a LED light?
- Different lighting principleAn energy-saving fluorescent lamp uses mercury vapor at low pressure to release ultraviolet light after energizing so as to make fluorescent powder coated on the inner wall of the lamp tube shine.The light emitting element of the LED is a semiconductor crystal,
- Q: Why can fluorescent lamps emit various colors?
- Phosphor of red, green and blue three colors, yttrium oxide (red light, peak wavelength 611nm), magnesium aluminate (emitting green light),The peak wavelength is 541nm) and the barium magnesium aluminate (blue light, with a peak wavelength of 450nm) mixed in a certain proportion can be obtainedFluorescent powder of any color can be sent out
- Q: What is a fluorescent lamp? What are fluorescent lights?
- The traditional fluorescent lamp type fluorescent lamp and electrodeless fluorescent lamp, traditional fluorescent lamp is a low pressure mercury lamp, mercury vapor is the use of low pressure in the discharge process of ultraviolet radiation, so that the phosphors emit visible light emitting principle, so it belongs to low pressure arc discharge light source. The traditional fluorescent lamp is equipped with two filaments. The filament is coated with electronic emission materials, three yuan carbonate (barium carbonate, strontium carbonate and calcium carbonate), commonly known as electronic powder. The alternating filament acts as a cathode and anode under alternating voltage. The inner wall of the lamp tube is coated with phosphor powder. The tubes are filled with argon at 400Pa-500Pa pressure and a small amount of mercury. After discharge, the liquid mercury evaporates into mercury vapor at a pressure of 0.8 Pa. In the electric field, the mercury atoms continuously from the original state is excited into the excited state, then spontaneous transitions to the ground state, and the radiation wavelength of 253.7nm and 185nm (the peak value of ultraviolet wavelength is 253.7nm, total radiation energy 70-80%; peak wavelength is 185nm, accounting for about 10% of the total radiant energy), to the release of excess energy. The fluorescent powder absorbs ultraviolet radiation and emits visible light. Fluorescent powder is different, the light is also different, that is, fluorescent lamps can be made white and various colors reasons.
- Q: Maintenance and repair of fluorescent lamp
- If the voltage is low, the lamp will light up in the beginning of the two pollutants emitted tungsten, so that the lamp tube produces many point, one of the reasons to become tube damage so that, as far as possible in the high voltage under the condition of light.
1. Manufacturer Overview
| Location | Guangdong,China (Mainland) |
| Year Established | 2006 |
| Annual Output Value | |
| Main Markets | North America Australia East Europe Hong Kong Taiwan Japan & Korea West Europe Mainland China |
| Company Certifications |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Shenzhen |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b) Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Induction Lamp
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 Sets pc
- Supply Capability:
- 10000 Sets per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
