3M Double Sided Tape 2 Hot Melt Adhesive DSH-100H Double Sided Tissue Tape
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
CONSTRUCTION:
Carrier: Tissue paper
Adhesive: Hot melt adhesive
Liner: Silicone release PE-coated paper, white colour.
TYPICAL PHYSICAL PROPERTIES:
Total Thickness (adhesives + tissue): 100 ± 5 micron
Initial Tack (14# steel ball): ≥80-150mm
Adhesion (Kg/25mm): 2.5 - 3.5 Kg
Holding power: 200 -- 500 min
PACKING:
Core I.D.: 3” (76mm±1)
Jumbo Roll：1.02 x 1000m
Packaging：Wrapped with corrugated cardboard.
Cut Roll: roll width 3mm up
REMARKS:
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and be kept away wet and/or heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
- Q: Double sided tape how to cut well, master with automatic cutting table, cut out, all askew, what reason, what should pay attention to?
- Apart from the factors of the machine, there are many other factors that affect the quality of slitting tape. For example, the material, some of the paper is of poor quality and easy to edge. And rewinding the tape itself is in place, if too loose, cutting out easily spread, roll core is easy to fall off, too easy to cut out the bowl etc.. Like this, you have to rewind it and keep the tension under control.
- Q: What adhesive tape is used on the heating wire on the electric blanket?
- High strength double sided adhesive tape, film adhesive tape, glass fiber adhesive tape, protective film adhesive tape, high temperature resistant stretch paper adhesive tape, secret anti fake adhesive tape, copper foil, aluminium foil adhesive tape, single side sponge adhesive tape
- Q: The advantages and disadvantages of the mesh double sided adhesive tape, and the influence of the density of the mesh on the adhesive tape.
- What material should be divided into mesh adhesive tape, the substrate is different, advantages and disadvantages are different, the main use is also different.
- Q: The foam on the wall will not tear off the double foamIt is convenient to ask for a rib
- 4, you can try a rubber. But in the beginning may feel more and more dirty, but rub a little longer, you will see the effect, this method is relatively tired, have perseverance.5, with blisters, put a little detergent, and then brush with an old toothbrush just fine.6, with a cloth with alcohol or Erguotou wipe.7, with a letter of sodium and water a wipe off, or can also use paint thinner.
- Q: Double sided with sun flower on the center console of car
- Very simple, you get some industrial alcohol, with a rag to kill, not to engage in alcohol directly with dishcloth Zhanshui rub slowly, do not worry, multi wipe, double-sided adhesive will remain in a heap, and then wipe off with hands as well.
- Q: What are the general use of double-sided tape?
- A lot, printing is the most! It has too many uses! See, take it
- Q: In the production process of cotton double-sided tape winding unevenness is what reason
- Coating uniformity, such a situation will be very small, but there is even a deviation from the coating can also occur.
- Q: Home decoration, with a thick foam tape to bring a whole stick that hook,It's all right now. It's falling all the time,Now to clean up, how can clean up?
- 3, with Fengyoujing rub, then dropped.4, you can try a rubber. But in the beginning may feel more and more dirty, but rub a little longer, you will see the effect, this method is relatively tired, have perseverance.5, with blisters, put a little detergent, and then brush with an old toothbrush just fine.
- Q: Construction method of butyl adhesive tape
- (1) according to the metal plate shape or the joint space, the joint width, according to the engineering design request, selects the gaugeCell size.(2) wipe the metal plate joint clean.(3) start the end of the metal plate, open the double-sided adhesive tape slowly, and make a straight line along the seam to make the sealing tape stickyAt the lap of the lower sheet metal, then gently press the adhesive tape with the hand to bond it firmly with the metal.
- Q: How can I get the double glue glued to the door?
- 1, with a hair dryer to the double-sided adhesive residual wall, a blow to the double-sided adhesive after heating, weak, can tear off lightly.2, when the wall is far from the power socket, if there is anhydrous alcohol, you can find cotton balls dipped in some anhydrous alcohol, to erase traces of double-sided adhesive.
Send your message to us
3M Double Sided Tape 2 Hot Melt Adhesive DSH-100H Double Sided Tissue Tape
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
