High Quality Copper Pipe to Plastic Fitting 45 Elbow
- Ref Price:
-
$0.31
/ watt
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 watt
- Supply Capability:
- 100000 watt/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
ppr fittings HYOSUNG PPR raw materials standard:DIN8077-8078 GB/T18742.3-2002 PN25 White grey green color
1.Material:Random Polypropylene(Hyosung R200P);
2.ISO9001&ISO14001;
3.Standard:GB/T 18742.3-2002, DIN8077/8078;
4.OEM also ok
- Q: PE is the hot melt?
- 1. When using this method, the hot melt butt welding machine is adopted, and the main operation steps are as follows:After the butt welding machine has been debugged, put the pipe to be placed on the welding jig and clamp;The cleaning pipe end to be connected and connected with two end milling cutter alignment docking, the displacement is not greater than the pipe wall thickness of 10%:When the temperature of the heating plate reaches the set temperature, put it on the heating plate:After heating, take out the heating plate, quickly start the oil pump pressure, join the two pipe heating surface, and step up to the welding pressure, keep pressure and cool down:After cooling to the specified time, open the clamp and remove the pipe from the rack, observe the roll edge, determine the quality of the connection, and complete the connection.2. Check the quality of hot melt butt jointThe determination of the quality of hot melt butt welding is still mainly concerned with nondestructive appearance inspection of welding roll edges. Usually includes edge geometry and cutting edge visual inspection, the edge to behind the buckling to prove that connected with no lack of fusion check.Ultrasonic testing and X ray examination have been applied abroad.Destructive detection. Tensile test, bending test and tensile creep test are carried out at the interface respectively.3, hot melt docking notes:The procedures for the use of the docking machines and the matters needing attention shall be observed;Operators must wear gloves, wear overalls, do a good job of self-protection, to avoid electric shocks or burns;Heating the surface of the board, and the connecting ends should be kept clean:Docking pressure should be adjusted to the actual needs of the site:Polyethylene pipes shall not be heated by open flame;The welding interface to protect from sand and rain hit.
- Q: What sizes are plastic pipe fittings available in?
- Plastic pipe fittings are available in a wide range of sizes, ranging from small diameters of less than half an inch to larger sizes of several inches or more. The specific sizes and dimensions of plastic pipe fittings depend on the type of fitting and the application they are intended for.
- Q: Are plastic pipe fittings resistant to solvents and cleaning agents?
- Yes, plastic pipe fittings are generally resistant to solvents and cleaning agents. The majority of plastic pipe fittings are made from materials such as PVC (polyvinyl chloride) or CPVC (chlorinated polyvinyl chloride), which are known for their chemical resistance. These materials can withstand exposure to a wide range of solvents and cleaning agents without deteriorating or becoming damaged. However, it is essential to ensure compatibility between the specific type of plastic used in the fittings and the solvents or cleaning agents being used.
- Q: Plastic pipe fittings are not GB?
- Plastic fittings are of national standard.Plastic pipes are usually made of synthetic resins, that is, polyester as raw materials, adding stabilizers, lubricants, plasticizers, etc., to "plastic" method in the pipe mill by extrusion processing. Because of its light weight, corrosion resistance, beautiful appearance, no bad smell, easy processing, convenient construction and other characteristics, it has been more and more widely used in building engineering.
- Q: Can plastic pipe fittings be used for pneumatic conveying systems?
- Yes, plastic pipe fittings can be used for pneumatic conveying systems. Plastic fittings are often chosen for these systems due to their corrosion resistance, lightweight nature, and ease of installation. However, it is important to ensure that the plastic fittings are compatible with the specific requirements of the pneumatic conveying system, including pressure, temperature, and material being conveyed.
- Q: Are plastic pipe fittings available in different colors?
- Yes, plastic pipe fittings are available in different colors.
- Q: Are plastic pipe fittings resistant to high-pressure steam?
- Yes, plastic pipe fittings are generally not resistant to high-pressure steam.
- Q: How can the PPR pipe be connected with the metal tube?
- This is a water storage type electric water heater installation and use of PP-R material, and is connected with the water heater outlet and below the triangle valve components is a special joint installed in the water heater, the components are used to transition metal tube connected with the plastic pipe, the connecting way is to facilitate future maintenance.
- Q: Can plastic pipe fittings be used in fish tank systems?
- Yes, plastic pipe fittings can be used in fish tank systems. They are commonly used for plumbing and water flow management in aquariums due to their durability, corrosion resistance, and affordability. However, it is important to choose fittings that are specifically designed for use in aquatic environments to ensure they are non-toxic and safe for the fish and other aquatic life.
- Q: Can plastic pipe fittings be used for power plant cooling systems?
- Yes, plastic pipe fittings can be used for power plant cooling systems. Plastic pipe fittings are commonly used in various industrial applications, including power plant cooling systems, due to their corrosion resistance, durability, and cost-effectiveness. However, it is essential to select the appropriate type of plastic pipe fittings that can withstand the temperature, pressure, and chemical requirements of the specific cooling system in the power plant.
Send your message to us
High Quality Copper Pipe to Plastic Fitting 45 Elbow
- Ref Price:
-
$0.31
/ watt
- Loading Port:
- Ningbo
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 watt
- Supply Capability:
- 100000 watt/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
