Frp roofing sheet corrugation machine tile making machinery
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 set
- Supply Capability:
- 5200 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Applications:
The products are widely applied to green house, skylight, porch, door, sandwich panel,
ceiling, transportation body, concrete form and liner panels.
Product Advantages:
1.It adopts advanced mechanical structures & technilogy. It has achieved domestic advanced level with advanced technology and reasonable craft, high degree automation and high outputs.
2.It is PLC digital control,including resin feeding.It can achieve vacuum charging resin to doctor blade.Even mixture, easy cleaning and more automation.
3.Easy operation, low noise, obvious electricity conservation, small size, compact structure, low energy consumption, high durability, good looking, etc.
4.Combined with powder collector to absorb the harmful substances to keep the healthy of the worker and prolong the service life of the machine.
5.Increase the operation rate of the material and lower the cost
Main Product Features:
1. Easy operation based on PLC intellectual control system. Only short-term training
can make operators complete production independently.
2. Unique arithmetic on temperature control makes oven heating fast, temperature control
precise. Which improve quality of products, reduce energy consumption and shorten the
preparing time effectively.
3. Roving chopper speed can be synchronous with the production line.
4. Special cross cutting machine and good synchronization performance make cutting accurately.
5. All the machine parts adopt international standard steel make machine with high stability.
6. System failure can be automatically alarmed and show fault point. Make maintenance easily.
7. Particular parts adopt special purpose wire, durable in use.
8. Size and layout of machine can be made according to customer requirements.
Basic Parameter:
Name | GRP FRP GFRP Composite profiles pultrusion Machine and frp rebar machine |
Power Supply | 380V |
Main Frame | 350 H-Beam |
Main Power | 37kw |
Pump Power | 3kw |
Forming Speed | 10 m/min |
Roll Station | Upper Level 11 Stands, Down Level 11 Stands |
Roller Diameter | 70mm |
Hydraulic Pressure | 10-12 MPa |
Forming Size | 840mm, 900mm |
Feeding Thickness | 0.3-1.2mm |
Feeding Width | 1000mm |
Backboard Thickness | 14mm, 16mm |
Chain Size | 20mm |
Cutter Standard | Cr12 |
Roller Standard | Cr12 |
Cr-Plating Size | 0.05mm |
Overall Size | 7500*1700*1300mm |
Total Weight | 10t |
FAQ:
1. What's your MOQ?
Answer: 1 set.
2. When to deliver the machine?
Answer: We deliver the machine within 40 days after receiving the prepaid. Some machines are in stock, so can be delivered at any time.
3. Are you a foreign trade company or factory?
Answer: We are a factory, specialized in producing all kinds of roll forming machines.
4. How can i visit your factory?
Answer: Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick you up.
Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick you up.
5. How can i trust you?
Answer: As for the quality, CE&ISO certifications have been achieved. For our innovations on the machines, We also get the Certificate of Utility Model Patent from State Intellectual Property Office of the People's Republic of China. And, we are Trade Assurance supplier, our customers are covered for on-time shipment, pre-shipment product quality, most importantly, alibaba.com will refund you the covered amount when we supplier does not meet the requirements in the contract. so trade with confidence.
Pictures:
- Q: this month bought a 180 thousand of the equipment and issued a value-added tax invoices, this sum of money can be deducted? How much deduction?Previously fixed assets are not deductible? Is this a policy that has just been changed this year? What's the tax rate? Thank you！
- Can be deducted from the value-added tax invoices on value-added tax deductible, in addition to the purchase of equipment costs, if there are qualified transport documents, you can also by freight * 7% deduction of input tax
- Q: Plastic blank in the gear hobbing machine processing, hob and workpiece is not to heat, then plastic is not easy to stick on the machine body.Just want to know the plastic gear processing technology is how, and ordinary steel gear processing technology difference where?.The more detailed, the better. Thank you
- LZ, Hello, about plastic gear processing and technology, I suggest you go to China Machinery CAD forum to see, I believe it will help you,
- Q: I want to use POM plastic to do mechanical disc cam, processed with sheet metal. (small dosage)Do other plastics have mechanical strength?
- Can be processed, but pay attention to cutting tools to be sharp, cutting force should be small, and fully cooled.The material is of good mechanical strength, and I know nothing in the plastic can match it.
- Q: Rubber, plastic, machining specialty, which university is good?
- Dalian Light Industry Institute, Tianjin College of Light Industry, Chengdu University of Science and Technology are good.
- Q: I do not know the classification details and processing procedures, as well as the purchase of such equipment, the need for experienced master guidance, you can also join the cooperation,
- Different kinds of waste plastics have different characteristics. As far as impurity content is concerned, waste materials in the middle and outer corners of the factory produce impuritiesThe content of less than 0.1%, piled up scrap for a period of time and other products used for% impurity content 0.1 ~0.5%, mixed with aluminum, cloth and paper composite plastic waste impurities are often more than 10%. For used waste plastics,According to different use conditions, will include ultraviolet radiation, heat, oxygen aging effect, pollutants.Ring. For different shapes of waste plastics, the volume density of materials after crushing is very different, film, sheet, flatThe volume density of the crushing material is smaller, which is a problem that must be considered in the process of waste plastics recycling and granulation.Two. Pretreatment of waste plasticsFrom discarded packages, such as bags, shopping bags, bottles, cans, boxes and waste agricultural film waste plastics, inPretreatment prior to granulation. The pretreatment process mainly includes classification, cleaning, crushing and drying.Classification work is the classification of miscellaneous waste plastics products according to the type of raw materials and product shapes classification. By raw materialsClass sorting requires operators to have a good knowledge of identifying plastic varieties, and the purpose of sorting is to avoid different speciesThe resulting polymers are incompatible with recycled materials and have poor performance. They are classified according to the shape of the product to facilitate the use of waste plasticsThe crushing process can be carried out smoothly, because the film, flat and fabric used in crushing equipment with some thick and hard wareThe crushing equipment often can not replace each other.
- Q: What's the price? How much does it cost to run a processing plant? What's better about that one?
- The material is mainly petExtrusion blowing is a molding process. The machine is the corresponding extruder and mold and auxiliary machineWhich one you use depends on what shape and material your bottle isI hope I can give you some help
- Q: Such as "computer embroidery processes" - Programming - sample preparation, shipment packing production computer
- Process flow of plastic products1. Preparation before moldingA, grain preheating and drying: if the grain is affected with damp, it should be dried;B, insert preheating: in order to reduce the gap between the cooling shrinkage value of metal and plastic, the larger metal insert should be preheated.C, barrel cleaning: when changing the product, changing the raw materials, cleaning cylinder is required.2, injection molding process feeding - plasticizing - injection - holding pressure - cooling - die opening piecesA, feeding: each feeding should be quantitative, in order to ensure uniform plasticization;B and plasticization: the grains are heated to a molten state in a barrel;C and injection: the injection molding machine uses a screw to inject molten plastic into the mold cavity;D, keep pressure: after the mold is finished, maintain the pressure for a certain time;E and cooling: keep cool for a certain time in the mold cavity;F, mold opening parts: mold open, take out the product.3, plastic parts after treatment: plastic parts after treatment:A, remove the fly edge, material handle.B, inspection and packing.
- Q: What chemicals should be used in plastic products?
- Several commonly used plastic additivesPlastic additives can be divided into seven categories according to their specific functions: additives for improving processability, such as thermal stabilityA constant agent, lubricant, etc. Additives for improving mechanical properties, such as plasticizers, toughening agents, etc.. The changeAdditives for good surface properties, such as antistatic agents, coupling agents, etc.. Additives to improve optical properties, such asColorant, etc.. Additives to improve aging properties, such as antioxidants, light stabilizers, etc.. The reduction of plasticAn additive such as an extender, a filler, etc.. The specific effect of giving other additives such as foaming agent,Flame retardant and anti mildew agent etc..Additives are meant to be dispersed in the plastic molecular structure without serious impactA chemical structure of plastics that improves its properties or reduces its cost. Addition of additives, energyThe plastic can improve the processing, physical and chemical functions of the base material and increase the physics and chemistry of the base materialCharacteristic。
- Q: What kind of machine is needed for the production of plastic products?
- Seventy thousand or eighty thousand an injection molding machine, a crushing machine, a drying machine forty thousand or fifty thousand, workshop, rent, labor, water and electricity to ten thousand months Duoliangwanyi, mold materials, another operator, of course cost large scale is low.
- Q: ABS plastic processing flow
- ManufacturabilityABS is an amorphous polymer with no apparent melting point. Because of its grades, grades, in the injection molding process should be based on the different grades to formulate the appropriate process parameters, generally in 160X: above, 270C can be formed below. Because the temperature is too high, there is a tendency to destroy the rubbery phase in ABS and begin to decompose over ZTOC. In the process of molding, ABS has better thermal stability, wider range of choice, and it is difficult to degrade or decompose. Moreover, ABS melt viscosity is moderate, its fluidity is better than the polyvinyl chloride, the polycarbonate and so on, moreover, the melt cooling solidification speed is relatively quick, generally in 5 ~ 15S can be cold solid. The mobility of ABS is related to both injection temperature and injection pressure, where the injection pressure is slightly more sensitive. Therefore, in the process of forming hand from the injection pressure to reduce the melt viscosity, improving the filling performance. ABS because of the different components, the performance of different water absorbent and adhesion, the adhesion and absorption of water between 0.2 ~ 0.5% and sometimes up to 0.3 ~ 0.8%, in order to get the products ideal for the drying process, before molding, the moisture content below 0,1%. Otherwise, the surface will appear on the silver bubble,.
Send your message to us
Frp roofing sheet corrugation machine tile making machinery
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 set
- Supply Capability:
- 5200 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
