Ethylene-Vinyl Acetate copolymer F406P
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction:
EVA film is used for encapsulating solar module, endowed Excellent durability, such as weather resistance, high-temperature and high-humidity resistance, UV light resistance
which provide good light transmittance, adhesion property, and outstanding long-term performance.
Properties | Test Method | Unit | F406P |
VA content | | -- | 28% |
Tensile strength | ISO 527-3 | MPa | 16 |
Elongation rate | % | 550 | |
Young Modulus | MPa | 4.7 | |
UV cut-off
| UV-Vis | nm | --- |
Gel content | Q/HZF 001-2010 | Gel % | >75 |
Adhesion to Glass | N/cm | >60 | |
Shrinkage | MD % | <3.0 | |
TD % | <1.0 | ||
Volume | ASTM/D527 | Ω*cm | >1.0*1015 |
Thickness | GB/T6672-2001 | mm | 0.3-0.8 |
Width | -- | mm | 200-2200 |
Surface | -- | -- | embossed |
- Q: There are two years of foreign trade experience of the business to enter the basic salary and commission is what level is reasonable?Products are solar lights, solar chargers, solar power systems, solar power, LED induction lamps and other solar energy products
- Many foreign manor type home, need to decorate their homes solar lights.
- Q: Product category and comparison of solar thermal utilization
- Why choose a new type of efficient flat plate solar water heater (device) system?In recent years, the use of solar thermal products in China has been rapid development. In the solar water heater manufacturing, use and market share, China has far ahead. However, due to the use of solar thermal products in domestic vacuum tube based, in full swing in the development of the industry, but also exposed a lot of worrying problems.
- Q: What are the disadvantages of traditional solar water heater
- Because the water does not go glass tube, glass tube without fouling, the winter is not. The water heater can be pressurized, installed on the third floor, the first floor can also be used. If the water heater on the ground, the two floor, the third floor can also be used. So even if the existing architectural design is not perfect, the installation of solar energy, but also can be coordinated. At the same time, the electric water heater liner technology can also be used, so that the pressure bearing capacity of solar energy reached 6-10Kg.
- Q: In the domestic high temperature solar energy collector can achieve how many degrees, the existing product and the technology form?
- The tower system, Zhongxingpengyue pattern, looks very spectacular, is the image project of solar thermal power generation love. Its size is limited to 10~20 megawatt level, the use of special, very limited usefulness. The tower system operating temperature 600~1000 degrees Celsius, there are several foreign demonstration projects, the home also has heard, but I do not know the specific progress to that stage, both at home and abroad have not heard of commercial operation successfully.Dish type system, the operating temperature of 700~1400 degrees Celsius, stand-alone dozens of kilowatts, the system 5~25 mw. Due to the small machine, a large number of prototypes developed at home and abroad, but also did not hear of a successful large-scale commercial operation example. Due to the use of Stryn hot gas engine, its manufacturing technology requirements are high, greatly limiting its development.
- Q: What is the future of solar power
- Residents issued 1 kwh of electricity, the state subsidy of 0.42 yuan; the national standard for the purchase of electricity from the desulfurization of residents with endless self generating electricity, the price is $0.42 per degree. To install and use a set of distributed photovoltaic power generation system with an average of 1 kilowatts of installed cost about 10 thousand yuan, if the 8 kilowatt system daily generating capacity of 30 degrees, 5 degrees every household consumption (no more than a price of 0.52 yuan), about 8 years to recover the investment. In accordance with the same calculation method, 10 kilowatts of distributed photovoltaic power generation device to recover the cost of 9-10 years. Family photovoltaic power plant to recover the cost of an average of between 8-10 years.
- Q: How to make better use of solar energy
- According to the history of the use of solar energy, solar energy has been used for more than 3000 years of history. The use of solar energy as a source of energy and power, only 300 years of history. The real solar energy as a much-needed supplementary energy in the near future, the basis of the future energy structure, it is a recent thing. Since 1970s, the rapid development of solar technology, solar energy utilization
- Q: What are the third generation solar cells
- In 2004, Professor Green proposed the idea of developing the third generation solar cells. If we apply the semiconductor crystal film solar cell is called the first generation of solar cells, thin film solar cell is called the second generation solar cell, then the third generation solar cell solar cells the next generation is expected
- Q: Now there is no sun, cloudy days can use solar products?
- The amount of radiation of solar water heater is the meaning of the sun. The sun did not reach that he cannot.
- Q: Buy solar water heater mainly look at what?
- Second, liner thickness. The quality of the liner determines the life of the water heater, if the water tank, the water heater will be scrapped. Major brand manufacturers use thickness of not less than 0.5mm of SUS304 food grade stainless steel liner. Argon arc welding is adopted to ensure the service life can reach more than 15 years. Other brands of water heaters in the liner between 0.2mm-0.4mm, the use of a period of time there will be water leakage problem. Therefore, consumers in the purchase of products must ask the thickness of the liner. At the same time, but also beware of patch water tank, the water tank liner is made up of a number of scrap steel belt, the entire inner bladder welding as many as dozens of times
- Q: Outdoor solar energy products, how can we do the process of IP65 level, the design of the water which should be noted that what? Beg enlighten heroes!
- Sub form to be simple, the need to seal the place where the seal can not add the province.Second, is the protection of components, internal structure should pay attention to water and diversion, it is best not to enter the water.
Send your message to us
Ethylene-Vinyl Acetate copolymer F406P
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords