PVC White Tape for Electrical Insulation at Lowest Price
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of KC71 Tape
• KC 71 is a self-amalgamating ethylene propylene rubber (EPR) tape used on solid dielectric cable for electrical insulation and jacketing in splices up to 69Kv and for building stress cones in terminations up to 35kV.
• The tape comes with a separator that is removed during the taping process.
• Its 0,76mm thickness and quick amalgamation facilitates a rapid, void free insulation build-up that is electrically stable and moisture proof.
• KC 71 is suitable for use with conductors rated at 90°C with an emergency overload rating of 130°C.
• The tape is also resistant to corrosion, chemicals and ultra violet light.
• KC 71 fully meets the Table 1 requirements for Type III tape in ASTM D 4388.
Dimensions of KC71 Tape
1” x .030” x 16.4'
25mm(width) x 0.76mm(Thickness) x 5m(length)
Consult us for other sizes
Specifications of KC71 Tape
Applications of KC71 Tape
• Electrical insulation and jacketing in splices of solid dielectric cable up to 69kV
• Building stress cones in terminations of solid dielectric cable up to 35kV
• Jacketing of indoor terminations
• Bus bar insulation and corrosion protection
• Jacket repair and restoration in all types of cable
• Moisture sealing applications
FAQ
Q1.Can we have the customized size tape?
A1:Consult us for other size
Q2:Is this Tape environmental-friendly?
A2:This tape is flame/arec resistance and environmental-friendly.
Q3:Can we have the sample/trail order to test quality?
A3:Surely we support the sample/trail order.
- Q: I want to use the PVC electric tape to wind the broken wires. The copper wire is out. I want to wrap it with PVC electric tape. This is the kind of picture
- It's an insulating tape, but you have to wrap it up a few times and tie it tight. This tape doesn't stick much longer
- Q: Is the transparent aluminum foil tape the same as the PVC tape?
- PVC (PVC) film is used as base material and applied to rubber pressure-sensitive adhesive to make good insulation, pressure resistance and weather resistance. Unique adhesive formula, good adhesion and touch, good adhesive force. Applicable to wire feeder, electrical insulation protection, automotive wiring and other electrical insulation protection.
- Q: PVC pipe and duct tape tape what is the difference
- Its cohesive force is very strong, paste is very solid, if the pipe burst, the basic will not burst, glue bonding department, sticky good, absolutely not leak and burst. Therefore, it is mainly used in pipeline corrosion protection.
- Q: Is the Teflon tape used for the construction of the project? Is it the usual band of raw material?
- The natural gas pipeline also has a special Teflon tape, in fact, the main raw materials are PTFE, but some processes are not the same.
- Q: What's the difference between an electrostatic tape and an PVC tape?
- PVC electrical tape is in soft polyvinyl chloride (PVC) film substrate, manufacture coated rubber pressure sensitive adhesive, has the characteristics of good insulation, flame resistance, voltage resistance, cold resistance, suitable for automotive wiring, wire winding, insulation protection etc..
- Q: Purchase insulation tape PVC Slitter
- What's your expected price? We are now aiming at different tape manufacturers recommend two kinds of equipment, the price is a little high, the current domestic customers are mainly 3M, Henghe rubber industry, France Saint Gobain, achem technology etc..
- Q: PVC insulation tape can withstand high temperature for a long time without aging failure
- PVC tape at temperatures below 70 degrees can not aging, where you are used, and if the environment requires high temperatures, you can use high temperature insulation tape
- Q: How to improve the tensile strength of PTFE defatted raw meal
- Generally referred to as "non stick coating" or "easy cleaning material". The material has the properties of acid fast, alkali resistance and various organic solvents. It is almost insoluble in all solvents.
- Q: What specifications do you have for PVC electric tape?
- In terms of product quality. The main difference between SG-8 and SG-7 resin is in viscosity number. Other indexes have little difference. In production, the risk coefficient of SG-7 resin is greater than that of resin. The production cost is basically the same as the SG-8 resin, SG-7 resin, which is slightly higher than the SG-7 type. Most enterprises indicate that the cost of SG-8 is slightly higher than that of SG-5, but there is a slight difference in the cost spread between the different enterprises. Need to and other types of enterprises, the cost is slightly higher than SG-8 type SG-5 type between 100-150 yuan / ton, but the line production enterprises said SG-8 and SG-5 costs less.
- Q: PVC tape does not contain any gum. What's the best idea?
- PVC tapeCharacteristics: a PVC film to the substrate, flash or matte surface, soft, elastic, high strength, good insulation properties, good transparency, good viscosity, excellent electrical insulation and sealing, insulation performance is stable in damp environment and water electrical.
Send your message to us
PVC White Tape for Electrical Insulation at Lowest Price
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
