Features & Applications of Double Sided PET Tape DSP-275GH For Industry:

1.Feature: Good anti-rebounding and anti-warping, excellent heat and temperature resistance, strong adhesion and holding power.

Applications: On nameplates, plastic objects and film switches mounting and stikcing; sticking in TV, kinescope, speaker and sound box etc.

2. The products should be stored at room temperature and be kept away wet and/or heat source.

3. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.

5. Special requirements will be satisfied after communications.

CONSTRUCTION of Double Sided PET Tape DSP-275GH For Industry:

Carrier: PET film, 175 micron

Adhesive: Solvent based acrylic

Liner: Silicone release PE-coated paper, white colour.

TYPICAL PHYSICAL PROPERTIES of Double Sided PET Tape DSP-275GH For Industry:

Total Thickness (adhesives + PET film): 275 ± 5 micron

Initial Tack (14# steel ball): ≤100 mm

Peel Adhesion (Kg/25mm): 0.7 ± 0.2 Kg

Holding power: ≥ 1440 min

Temperature resistance: 80C

PACKING of Double Sided PET Tape DSP-275GH For Industry:

Core I.D.: 3” (76mm±1)

Jumbo Roll：1.02 / 1.24 x 100m

Packaging：Wrapped with corrugated cardboard.

Cut Roll: roll width 3mm up

Remarks Of Double Sided PET Tape DSP-275GH For Industry:

1.         The data above are typical results and subject to change without notice.

2.         Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.         The products should be stored at room temperature and be kept away wet and/or heat source.

4.         It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.         The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.