3 Double Sided Tape DSC-3406
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
CONSTRUCTION:
Backing: Cloth
Adhesive: Hot melt based
Liner: white/ light yellow / dark yellow release paper
TYPICAL PHYSICAL PROPERTIES:
Thickness (adhesives+cloth): 250 ± 10micron
Tack rolling ball: 22#
180° Peel Adhesion to steel: 13-16N/25mm
Holding Power: 20H
Elongation: 2-5%
Temperature resistance: 60 oC
PACKING:
Core I.D.: 3” (76mm±1)
Jumbo Roll：1.02 x 500m
Packaging：Wrapped with corrugated cardboard.
Cut Roll: roll width 3mm up
REMARKS:
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and be kept away wet and/or heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
- Q: How do you use double-sided adhesive for cloth? What is its purpose? Must heating be applied to glue? Will there be residual glue after bonding? Please speak more detail.
- Cloth can be directly adhered to the top with double-sided adhesive, without heating. Hot glue is called hot melt adhesive
- Q: How to remove the double adhesive on the tile completely?
- 4, you can use an electric hair dryer to dry, and then gently scraping on it5, with cotton swabs dipped in a nail polish water.6, wiping fengyoujing.7, use special cleaning agent or sports shoe decontamination cream to wipe.8, with the drawing 4B rubber is very soft, that kind of Korean eraser can erase it.
- Q: How to fill in the property when releasing adhesive tape?
- First of all, to understand your kind of tape, that is, its use, and then define attributes. I hope I can help you!
- Q: With scissors to cut the foam double-sided tape, the scissors left a foam glue, sticky extra strong, difficult to remove, what is the way to remove the residual foam on the scissors?
- First, use wire ballTools / raw materials: steel wire balls (for washing dishes, washing dishes) and dishwashing detergent.Methods / steps:1. Bring out the scissors glued to the glue, dip the water into the wet scissors, and apply the detergent;2. Brush with steel wire brush;3, clean water on a clean.
- Q: Double sided adhesive tape for flexographic printing machines
- Mount tape is a double-sided tape, play a major role in two: first, flexo plate fixed on the printing roller or the sleeve, to prevent the printing plate in the printing process to tilt or displacement, ensure the normal printing process; two, through the selection of foam tape core density, to achieve fine control over in graphic design with the printing pressure, printing plate, improve the printing effect.
- Q: There are several kinds of tape knowledge
- According to the scope of application division can be divided into:Warning tape, carpet tape, electrical tape, protective film tape, winding tape,Sealing tape, die cutting adhesive tape, etc..4, according to market penetration rate can be divided into: ordinary adhesive tape, special adhesive tape.5, according to the application of environmental temperature division can be divided into: low temperature tape, room temperature tape, high temperature adhesive tape.
- Q: In the production process of cotton double-sided tape winding unevenness is what reason
- Back paper smoothness and with or without moisture.The above situation may occur when the volume of winding is not smooth, pay attention to observation when gluing,
- Q: Will double face adhesive affect its stickiness in summer?
- Quality inspection of double sided adhesive tape:1, check whether there is a crack on the double-sided adhesive tapeDouble sided tape in slitting, if the cutting tool adjustment is inappropriate or the blade is not sharp, will be in the double adhesive tape on the surface or bottom paper cracks, cracks at the pull out of the fiber will be adhesive stick. The occurrence of cracks may be continuous, may also be random, may appear in the side of the double-sided tape reel, may also be on both sides, so, double-sided tape processing, not to look carefully at the end of the paper and paper on whether there is a small crack.Then, take a piece of paper that has been checked, peel it off the bottom, and check again whether there is a crack on the bottom and the bottom of the paper, because the crack is sometimes very small and can only be found after separating the base paper and the tissue.
- Q: What are the uses of video tapes in life?
- 1. boxes are fixed to protect a variety of products, and 2. provide protection during production3., widely used in metal, plastic, glass, ceramics and other materials, such as electronic products, plastic parts fixed, laminated glass and so on4. antistatic tape is used for electrostatic sensitive products or anti-static area as a warning role5. anti-static warning floor tape is used for anti-static areas, including Chinese and English warning slogans
- Q: What is an engraving tape?
- 1., using high strength synthetic rubber as base cloth, strong toughness, not easy to break
Send your message to us
3 Double Sided Tape DSC-3406
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
