GM D-201H Double Sided Tissue Tape
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
CONSTRUCTION:
Tissue: 14gsm
Adhesive: Solvent based acrylic copolymer.
Liner: Silicone release PE-coated paper, white color.
TYPICAL PHYSICAL PROPERTIES:
Total Thickness (adhesives + tissue): 120 micron
Rolling Tack (11mm steel ball): 10 cm
Peel Adhesion: Unwind Side -- 20 N/25mm (20 min dwell on stainless steel)
Liner Side -- 17 N/25mm (20 min dwell on stainless steel)
Adhesion to liner: 0.5 N/25mm
Application Temperature: +10 ~ +40 Celsius degrees
Temperature Resistance: -10 ~ + 80 Celsius degrees
PACKING:
Core I.D.: 3” (76mm±1)
Jumbo Roll:1.04 x 1000m; 1.04 x 500m
Packaging:Wrapped with corrugated cardboard.
Cut Roll: roll width 3mm up
REMARKS:
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and be kept away wet and/or heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
- Q: Double sided tape how to cut well, master with automatic cutting table, cut out, all askew, what reason, what should pay attention to?
- Two, aspects of the tape of the material itself may be a problem, some of the material almost cut when the effect is not too good, will play a flash, or volume, complex will also affect the cutting effect, to spread the trouble, in addition, mechanical equipment has great influence, we are do the cutting device, cutting time, feed speed is that, because the first two are no problem, good automatic cut several section of cutting speed, feed, cutting, cutting paper and so on, if not cut it, only one speed in, too may the flash, uneven cut
- Q: I use double-sided tape to paste things, but now I want to take things down, and now things are glued to the gum, how can I clean it?
- Try to use Fengyoujing rub, then no eraser,Gasoline is also organic, you can try
- Q: The door frame is glued on both sides of the curtain. Now the curtain doesn't work. It can't be cleaned on both sides. How can it be removed? But it doesn't break the paint on the door It's a little bit on the wall, too.
- 3, and so on 5 minutes later, with a dry cloth to wipe, you can quickly get rid of.4, if you still feel a little sticky, just do it again in the same way.
- Q: Curtain wall double glue is used for what? What is the use?
- In the 102 specification, the action of double-sided tape (i.e., double-sided adhesive) you mentioned is referred to for controlling the location of the structural adhesive and the cross sectional dimensions. The material is a double coated polyurethane, a low volume polyethylene, and a low foam material
- Q: How do you apply double-sided adhesive tape?
- 7, in the printing process to clean the printing plate, should avoid cleaning solvents, contact tape, so as not to damage the tape;8 when the plate is removed from the tape, the angle between the plate and tape shall be no more than 90 degrees.9, the interface version of the place to stay 5mm or so, the use of 3M 1600 electrical insulation tape seal version of the effect is good, you can effectively avoid wiping the plate caused by the interface version of the resulting ink pollution, and very economical.10, double-sided adhesive over repeated use can produce overprint bad phenomenon, especially in the new situation, and used for a long time in registering are likely to happen.
- Q: PET what's the advantage of double-sided adhesive?
- Can be applied to a wider range of temperature and harsh environment, such as Shanghai Yao adhesive tape factory produced PET double-sided tape, there is a good initial viscosity and viscosity
- Q: What is the relationship between the temperature of the double adhesive tape and the force of the adhesive tape?RT, double-sided adhesive tape at room temperature bonding fixed plastic products, with the increase in temperature, the adhesive force will increase or decrease, the temperature drop?In use, the material is subjected to certain external forces and minor shocks. If you want to ensure the optimum state of viscosity, should you avoid high temperature or avoid low temperature?
- When the temperature decreases, the stickiness will increase, and the initial viscosity and peel strength will decreaseAs can be seen, it is generally guaranteed to be placed at the right temperature
- Q: Double sided with sun flower on the center console of car
- Very simple, buy a roll of transparent adhesive, adhesive tape will do, paste you have double-sided adhesive place, and then put it after tearing, repeated a few times you can stick it offThis is a very good method, very simple and practical, easy to save trouble. I used, good, support
- Q: How to separate water-based double-sided adhesive and oily double-sided adhesive?
- Double sided tape is made of paper or cloth, plastic film substrate, then the elastomer pressure-sensitive adhesive or resin adhesive coating made in the substrate of the roll type adhesive tape is composed of base material, adhesive, release paper (film) is composed of three parts
- Q: Classification of base material of double sided adhesive tape
- They are widely used in leather, nameplate, stationery, electronics, automobile decoration, shoes, paper making, handicrafts, paste, positioning and so on.
Send your message to us
GM D-201H Double Sided Tissue Tape
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords