CSR 65 MET COKE

Ref Price:

Loading Port:: China Main Port

Payment Terms:: TT OR LC

Min Order Qty:: -

Supply Capability:: -

Inquire Now

Add to My Favorites

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

You Might Also Like

Foundry Coke Ash 10.5%

Foundry Coke Ash 10%

Calcined Anthracite Made from Taixi Anthracite Coal with stable quality F.C. 93%

Foundry Coke Size 80-120mm

Nut coke of 20-40mm

The NUT Coke of Size is 20 –-- 50 mm

the Coke Breeze of Size is 0 ---- 10 MM

The Metallurgical Coke of Size is 30 – 90 mm

Our companybegan to export coke when China cancelled 40% of coke export tariffs and quotason January 1, 2013.

We can offer belowgrade met coke, origin from China.

Quality(Specifications guaranteed at Load Port):

Ash 12.5% Maximum (ondry basis)

Volatile Matters 1.5% Maximum (on dry basis)

Sulphur 0.65% Maximum (on drybasis)

Phosphorous 0.035% Maximum (on drybasis)

Micum 10 8.0% Maximum

Micum 40 82.0% Minimum

CSR (ASTMStandard) 65.0% Minimum

CRI (ASTMStandard) 28.0% Maximum

Size 30-90mm 90.0% Minimum

Under 30mm 5.0% Maximum

Over 90mm 5.0% Maximum

Moisture 5.0% Maximum (asreceived)

Let me know your demands then I can check availability.

Q: We would like to export a batch of coke, I would like to know what information is required for a permit: Step 1: apply for an electronic key:The electronic key is equivalent to the enterprise identity authentication, after the application is similar to online banking U shield, the cost of 350 yuan. Including the physical Key ($150) and digital certificate price ($200), where Key is a one-time fee, digital certificates for the annual cost, valid for one year.

Q: The chemical composition of coke is m10.m25: Abrasion resistance refers to the ability of coke coke can resist friction without generating surface of glass forming debris or powder, by the M10 value. The effect of the crack of coke crushing strength, M40 value, the influence of coke pore structure of abrasion strength M10 value determination method of.M40 and M10 was more in China the migon drum test in Germany. As shown in table 31-1.After the completion of the test, the sieve with the pore diameter of 40mm and 10mm screening, greater than the percentage of 40mm particle size is M40, less than 10mm of the particle size of the M10 value. The intensity of the provisions of China Metallurgical Coke indicators are shown in table 31-2.

Q: What is the reasonable standard of volatile content of coke: 11% of the sulfur from the blast furnace charge into the furnace comes from the ore, and the other comes from the limestone; the other is from the coke, so the coke is the main source of sulfur in the charge of the 82.5% of the charge. Sulfur content in coke directly affects the production of blast furnace. When the sulfur content in coke is greater than 1.6%, sulfur increased 0.1%, the amount of coke increased 1.8%, limestone amount increased 3.7%, 0.3% increase in amount of ore blast furnace output to reduce the sulfur content under 1.5 - 2.0%. metallurgical coke is not greater than 1%, the use of large and medium-sized metallurgical coke content in blast furnace is less than 0.4 - 0.7%.

Q: Coking coal, coke, coal, steam coal what is the difference?: Coking coal is the raw material for coke

Q: Coke boiler belongs to coal-fired boiler: Coke is commonly used in the smelting industry, such as iron smelting converter, steel blast furnace, ferroalloy electric furnace, etc.

Q: Listen to a lot of people say that steel is now coke is not true?: Steelmaking is definitely not coke, but now most of the very mature iron making technology needs coke, the future direction of development of iron is not used or less coke

Q: I see that there are metallurgical coke and coke on the Internet, what is the difference between them (I hope to be able to say in detail) and a level of two points, how is this going on?.. Where is the quality of coke in China? Hunan good coke plant which? Although the problem is a little bit more, I hope that insiders can give some useful information. Extremely grateful.: I see that there are metallurgical coke and coke on the Internet, what is the difference between them (I hope to be able to say in detail) and a level of two points, how is this going on?.. Where is the quality of coke in China? Hunan good coke plant which? Although the problem is a little bit more, I hope that insiders can give some useful information. Extremely grateful.

Q: Do not understand why some of the indicators of coke is the cause of the full analysis of phosphorus or foundry use of this time?It is best to use the foundry requirements? Thank you: As everyone knows, sulfur and phosphorus is harmful substances in the metal, because the sulfur is out in coke processing, so this index is not required, but the phosphorus in this process has not been effectively removed, so this is the requirement of foundry process or smelting plant. Phosphorus can reduce the strength of the metal, will lead to the metal "cold crisp", so to control the phosphorus content of coke, to prevent phosphorus into the metal.

Q: The cost of iron ore and coke: The full cost of 2300 yuan / ton, manufacturing cost of 1950 yuan / ton, the use of iron ore per ton of steel 1.6 tons

Q: The two day of the fire is not wang you have a good way to have any good way. Such online: Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. Coke oven gas produced in the process of coking and recovery is not only a high calorific value of fuel, but also an important industrial raw material for organic synthesis.

Send your message to us

*Email

*TEL

*Quantity

*Unit