Coke Breeze of 3 to 6 mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Coke Breeze of 3 to 6 mm Description：
Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.
Coke is mainly used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, compound and the function of stock column frame.
2. Main Features of the Coke Breeze of 3 to 6 mm ：
• Quality assurance
• Mutual benefit
• Preferential price
• Various choice
3. Coke Breeze of 3 to 6 mm Images:
4. Coke Breeze of 3 to 6 mm Specification:
Parameters | Ash(DB) | Moisture (ARB) | Volatile Matter (DB) | Fix Carbon (DB) | Size 3-6mm | +6mm | -3mm |
Guarantee | 12.5%max | 15%max | 1.5%max | 83%min | 90%min | 5%max | 5%max |
5. FAQ
We have organized several common questions for our clients，may help you sincerely：
1) How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
2) What are coke's main physical properties?
on the relative density of density, coke, coke porosity, thermal conductivity for the heat capacity of coke, coke, coke, coke ignition temperature, coke thermal expansion coefficient of thermal stress and coke, coke shrinkage rate, coke resistivity permeability, etc.
The average heat capacity is 0.808 kj/(KGK) (100 ℃), 1.465 kj/(KGK) (1000 ℃)
Thermal conductivity is 2.64 kj/(MHK) (room temperature), 6.91 kj/(MHK) (900 ℃);
Ignition temperature (air) is 450-650 ℃.
3) How about your company？
Our company began to export coke when China cancelled 40% of coke export tariffs and quotas on January 1, 2013. We export many kinds of coke, such as CSR60 % and CSR 62% metallurgical coke (met coke), the NUT coke of 20 to 50 mm, coke breeze of 3 to 6 mm, and so on.
- Q: The total amount of heat released by the fully burnt 200g coke is 60% by mass of 10kg water absorption [q coke =3.0 * 107J/kg, C water =4.2 * 103J/ (kg = C)], q:(1) how much heat is absorbed by water?(2) if the initial temperature of water is 10 degrees C, then, after absorbing heat, the temperature will rise to how much?
- (1) the amount of heat released from complete combustion of coke:Q put =mq=0.2kg * 3 * 107J/kg=6 * 106J.Heat absorbed by water:Q =Q * 106J suction ETA =6 * 60%=3.6 * 106J;(2) Q =cm t suction dreams,Dry water temperatures:Delta t=Q ceilingC water m water=3.6 x 106J4.2 x 103J/ (kg * c) * 10kgC = 85.7,
- Q: What are the uses of these early industrial iron and steel? Any difference?What kind of carbon do we eat in the middle of a long strip of carbon?
- Charcoal:1 metallurgical industryIn the past, the charcoal was used to smelt iron ore, and the pig iron was melted by charcoal and coke. The structure and mechanical properties were not the same even if the chemical composition was the same. The charcoal smelting pig iron generally has the fine grain structure, the casting is compact, does not have the crack the characteristic, the pig iron with the charcoal production contains the impurity is few, is suitable for the production high quality steel. Due to the reduction of charcoal, so in the metallurgical industry can be used to restore ore smelting metal.In the non-ferrous metal production, charcoal used for surface flux, non-ferrous metal melting, the surface flux in the molten metal surface protective layer, so that the separation of metals and gases, can reduce the loss of molten metal splash, and can reduce the melting material in gas saturation.A large amount of charcoal is also used to produce crystalline silicon, silicon used charcoal ash production should not contain too much carbon and head.
- Q: With the number of 1 tons of steel smelting coke
- Because it can reduce energy consumption and reduce costs. So in the iron and steel enterprises coke rate decreased as the main goal of public relations, all the staff for the blast furnace coke rate reduction efforts. A few data in Liaoning, the average coke rate of Anshan and Benxi, Anshan Benxi is 330kg/t, is 360kg/t, that is to say a pig needs 330 360kg and coke production 2 saddle of the iron and steel enterprises. Shanghai Baosteel coke for the best in the country, can reach about 280kg/t. Is about 280kg per ton iron coke, the national leading level.
- Q: Listen to a lot of people say that steel is now coke is not true?
- With the rapid development of the domestic and international iron and steel industry, the demand for coking products is increasing rapidly, the investment is heating up, and the industry is expanding rapidly. But the coking industry of high resource consumption, production and emissions, especially the emissions of harmful substances, causing serious waste of resources and environmental pollution, brings great pressure to the sustainable development of national economy, which also hindered the rapid development of coking industry.
- Q: I see that there are metallurgical coke and coke on the Internet, what is the difference between them (I hope to be able to say in detail) and a level of two points, how is this going on?.. Where is the quality of coke in China? Hunan good coke plant which? Although the problem is a little bit more, I hope that insiders can give some useful information. Extremely grateful.
- Coke is a special and molten iron cupola coke. Coke is the main fuel cupola molten iron. Its role is to melt the burden and make the hot metal overheating, the support column to maintain good ventilation. Therefore, the foundry coke should have large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough
- Q: Can the sulfur content of coke affect the casting process of nodular cast iron at 0.65?
- If the control is not good, the manganese content in the molten iron can be increased by increasing the reagent
- Q: What is the use of coke
- From the distribution of coke production in China, the distribution of coking enterprises in China is unbalanced, which is mainly distributed in North China, East China and northeast china. Three, the use of coke coke is mainly used in blast furnace ironmaking and copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting furnace, reducing agent, heating agent and the role of the material column skeleton. The use of coke instead of charcoal in the blast furnace has laid the foundation for the large-scale development of modern blast furnaces and is a major milestone in the history of metallurgy. In order to achieve better technical and economic indexes of blast furnace operation, the coke (metallurgical coke) must have proper chemical and physical properties. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Such as foundry coke, generally require large size, low porosity, high fixed carbon and low sulfur; chemical gasification, strict requirements for strength, but requires good response, high ash melting point; calcium carbide and coke production requirements to improve the fixed carbon content.
- Q: The sulfur content of coal and coke in general, the coking process of sulfur content of coal into the output of sulfur content of coke compared to those who are high and low?
- 80% to 90% of the sulfur in coal into coke, the other into the coke oven gas.
- Q: What are the requirements for the quality of coke in blast furnace smelting
- 4, volatile in coke: according to the volatile content of coke can determine the maturity of coke. Such as volatile content is greater than 1.5%, is said to produce coke; volatile less than 0.5 - 0.7%, it is said to be overdone, the general maturity of metallurgical coke volatile is divided into about 1%.5, the moisture in the coke: water fluctuations will make the measurement of coke is not allowed, resulting in fluctuations in furnace conditions. In addition, the increase in the moisture content of Coke will make the M04 high, M10 is low, the drum index error.6, the screening of coke composition: in the blast furnace coke particle size is also very important. In the past, the particle size of coke in our country is as follows: the coke size of large coke oven (1300 - 2000 square meters) is greater than 40 mm; the coke size of medium and small blast furnace is larger than 25 mm. However, some of the steel test shows that the coke particle size of 40 - 25 mm as well. Larger than 80 mm of coke to be whole, so that the particle size range. The coke block is uniform, the gap is large, the resistance is small, and the furnace condition runs well.
- Q: Mechanism of carbon and coke is not the same as the price which high?
- Stick out almost all with crack. And they say the yield of 180 kg / hour also is very different, not only the normal production hours when the output of 100 kilograms. I had also directed his blog to the thought, the personality is good. It seems that I really fooled. Later on the Internet listen to friends that they and Beijing Shouke, and sell equipment are a group of Shouke and powerful equipment are factory Hebei Ba Chau do, the technician will not help garbage shit escape love who are also the factory to help Hebei Ba Chau cultivated. It is the general black crow. The wolf escaped, and ventured into the mouth. I put my story and I just hope I don't have the same people cheated, Juyuan suzerain is the biggest liar. Equipment market is too dirty, the bone charcoal mechanism shall not ah!
Send your message to us
Coke Breeze of 3 to 6 mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
