7W Led Spot Light Gu10
- Ref Price:
-
$2.50 - 3.60
/ pc
- Loading Port:
- Ningbo
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 100000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
7W led spot light GU10
+Base: GU10
+Watt: 7W
+Voltage: AC220-240V
+Luminous Flux: 430lm
+Color: Warm white, cool white, day white
+Beam Angle: 120 degree
+Material:Aluminum body
+CE, ROHS approval
+2 years warranty
Low price, quantity production, short lead time
Payment terms: 30% TT advance, the balance before shipment or LC at sight
7W led spot light GU10
2 years Warranty for led spot light 7W.
We can OEM your brand
Specification of led spot light 7W 5W.
Item | Watt. | Luminous Flux | PF | Size | Led type | Material | Color temp. |
spot GU10 5W | 5W | 340lm | >0.5 | Ø50x56mm | 5pcs 3030SMD | Aluminum lamp body | 2500K-7000K |
spot MR16 5W | 5W | 340lm | >0.5 | Ø50x54mm | 5pcs 3030SMD | Aluminum lamp body | 2500K-7000K |
| spot GU10 7W | 7W | 430lm | >0.5 | Ø50x56mm | 7pcs 3030SMD | Aluminum lamp body | 2500K-7000K |
| spot MR16 7W | 7W | 430lm | >0.5 | Ø50x54mm | 7pcs 3030SMD | Aluminum lamp body | 2500K-7000K |
Advantage:
+ Always keep high cost-effective
+ No Mercury
+ High lumen and low power
+ Long lifetime
+ Ra≥80
+ Instant start, no flashing
+ Environment friendly and 80% power saving
+ Protection of your sales area, ideas of design and all your private information
Application:
Widely used in the hotel, meeting room, offices, hospital, schools, factories, commercial lighting, shopping malls, supermarkets, kitchen, home indoor lighting and so on.
Cautions:
1, Switch off the power before replacing the lamp.
2, Keep away from direct sunshine and high temperature.
3, Indoor use only.
4, If any doubt about the installation or use of this product, consult a competent electrician.
- Q: How high is the temperature of the LED lamp?
- Because the LED can only be used under a certain stability, LED lamps, lighting is not stable,
- Q: LED to shoot the light always blink what's the problem?
- This may be the drive problem, change the drive is not bright is the problem of aluminum plate design. Try to change the first drives.
- Q: Help: anyone know how high power LED small shoot the light and the light band?
- Conventional seven holes small shoot the light with the power of flooding into account, perhaps within 3 w - 4 w LED lights with a meter with 4-15 w, if you are buying into back slot instead of T5 fluorescent tube with the words should be within 10 to 15 w
- Q: The PAR value of lamps and lanterns is what mean?
- The PAR value of lamps and lanterns is parabolic shape of the lamp. Said is the shape of the lamp. For example, PAR20, PAR30 PAR38 said maximum overall diameter size. Such as PAR38, maximum overall diameter size of 38 (1/8) * * 25.4 120.0 mm material 38 in Britain is divided into units, the conversion relation is as follows: 1 the points = 1/8 "1 inch = 25.4 mm.
- Q: The LED lamp aging is what mean
- Aging principle ditto Factory after aging in general refers to shoot the lamp to be produced at room temperature and under the condition of electricity place about three days, detects the presence of dead lights, brightness down too quickly to the naked eye can obviously see other problems.
- Q: Clothing store 20 square meters need several track shoot the light, Ann is LED
- This says to amdo To see your display, put, if your product, the goods is more than a few more words If you compare the broad is less Back a bit unprofessional Hope your business is thriving
- Q: Does the LED light have to be transformer?
- Led lamp bead can't directly answer the alternating current (ac). Alternating current (ac) to the drive power supply, drive power supply output termination LED lamp bead.
- Q: The luminous flux LED to shoot the light, technical parameters, MR16 GU10, chips and other parameters
- LED shoot the light cup MR16 voltage: 12 v, 3 x1w flux: 240-300 LM this is to see what is the single light bead chip size to LM, like 45 ml 112 LM chips do no problem, then flux have 312 LM, GU10 voltage can be done as required.
- Q: The house that new clothes builds, pick up a LED lamp Specific parameter no receive wire didn't receive zero after electrify LED lights have a dim light An estimated 10% of the after less than fully open after disconnect all electrical appliances There are light which out of the question to solve the trouble is online, etc. ~
- LED lamp belongs to low pressure constant current electric equipment, want to use the power adapter when ac 220 v power supply to drive. Now the high frequency switch power supply, LED power supply is almost working frequency is controlled in 100 KHZ, input and output impedance is very high, start up easily. When turn on the fire didn't answer the zero line, power shell or internal circuit board is exposed to air, larger area to form a minor loop and outward radiation energy, cause the power weak vibration, low output voltage. This phenomenon is not obvious when the air is dry. Therefore, in order to use electricity safety and environmental protection, use LED lamps and lanterns is best according to the standard connection, namely switch must control the fire. Of course, there are still many LED lights manufacturer in order to reduce costs, using a simple capacitor step-down type power supply for the LED power supply. Because the source is a capacitive load, even after the switch wire through line can the distributed capacitance between the conduction small current, lead to LED lights dim.
- Q: The difference between floodlight and LED to shoot the light
- Floodlight lighting shoot area/power than shoot the lamp to be big, have waterproof function.
Send your message to us
7W Led Spot Light Gu10
- Ref Price:
-
$2.50 - 3.60
/ pc
- Loading Port:
- Ningbo
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 100000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
