15Ah cylindrical cell Lithium-ion CNBM rechargeable batteries 15Ah lithium battery
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
15Ah cylindrical cell Lithium-ion CNBM rechargeable batteries 15Ah lithium battery
Scope
This specification defines the requirements of the lithium-ion rechargeable battery supplied by CNBM.
Product Classification and Model
Item | Specification | Remark |
3.1 Capacity | Minimum 15Ah | By Standard Charge and Discharge(see 5.3,5.4) . |
3.2 Nominal Voltage | 3.2V | Standard Discharge Average 3.2V |
3.3 Max Charge Voltage | 3.65V | / |
3.4 Standard Charge Current | 0.5C | / |
3.5 Standard Charge Time | 2.5h | CC-CV |
3.6 Continuous Charge Current (Max.) | 3C | Not for Cycle Test |
3.70 Min. Discharge Voltage | 2.0V | -20℃(1.8V) |
3.8 Standard Discharge Current | 1C | / |
3.9 Continuous Discharge Current (Max.) | 5C | Not for Cycle Test |
3.10 Cell Weight | less than290g | / |
3.11 Cell Internal Impedance | less than3mΩ | AC, 1kHz |
3.12 Storage Temperature | -20~50℃ | 1 month |
3.13 Standard Charge |
Constant current
| 0.5C
|
3.14 Standard Discharge | Constant Current End voltage (Cut off)
| 1C
|
3.15 Temperature of Charge or Discharge | Charge:0~45℃ | / |
The structure of cells
Nominal Specification
Item | Specification | Remark |
3.1 Capacity | Minimum 15Ah | By Standard Charge and Discharge(see 5.3,5.4) . |
3.2 Nominal Voltage | 3.2V | Standard Discharge Average 3.2V |
3.3 Max Charge Voltage | 3.65V | / |
3.4 Standard Charge Current | 0.5C | / |
3.5 Standard Charge Time | 2.5h | CC-CV |
3.6 Continuous Charge Current (Max.) | 3C | Not for Cycle Test |
3.70 Min. Discharge Voltage | 2.0V | -20℃(1.8V) |
3.8 Standard Discharge Current | 1C | / |
3.9 Continuous Discharge Current (Max.) | 5C | Not for Cycle Test |
3.10 Cell Weight | 290g | / |
3.11 Cell Internal Impedance | less than3mΩ | AC, 1kHz |
3.12 Storage Temperature | -20~50℃ | 1 month |
3.13 Standard Charge |
Constant current
| 0.5C
|
3.14 Standard Discharge | Constant Current End voltage (Cut off)
| 1C
|
3.15 Temperature of Charge or Discharge | Charge:0~45℃ | / |
Appearance and Dimension
4.1 Appearance
There shall be no such defects as scratch, rust, discoloration, dirt, deformation, leakage which may adversely affect commercial value of the cell.
4.2 Dimension
Height (Including pole) :140±0.3mm
Height (Except pole) :138.4±0.3mm
Diameter (Except PVC) :33.3±0.2mm
Diameter(Including PVC) : 33.5±0.2mm
Lithium Battery BMS / PCB / PCM
Li-ion cells should always be used with a protection circuit to prevent the cell from over charging or over dis-charging. Choosing the correct circuit and applying it appropriately is vital to the longevity your batteries and your own safety.CNBM test each Cells and BMS/PCB/PCM before manufacturing and promise it is functional and safe.
BMS / PCB / PCM is the "heart" of Lithium battery pack. BMS (Battery Management System) is any electronic system that manages a rechargeable battery (cell or battery pack), such as by monitoring its state, calculating secondary data, reporting that data, protecting the battery, controlling its environment, and balancing it.
Packing
The Packaging with regard to Source Factory Deep Cycle LiFePO4 Lithium ion Battery 12V 100Ah for Solar system/RV/Motorhome/Boat
FAQ
Q1: Why choose us?
1. Quickly respond to customer inquiries within 12 hours.
2. Strong research and development capabilities, all kinds of latest products.
3. More than 10 years of experience in producing battery products in a variety of applications.
4. Value quality and long-term cooperation to achieve a win-win relationship.
Q2: Are you a factory or a trading company?
We are a factory located in Zengcheng District, Guangzhou.
Q3: When is the order placed, when will the product be delivered?
We guarantee to deliver the battery within 7 days, and the custom theme takes 20 days.
- Q: There are two years of foreign trade experience of the business to enter the basic salary and commission is what level is reasonable?Products are solar lights, solar chargers, solar power systems, solar power, LED induction lamps and other solar energy products
- Yes, for example, solar lights, developing and developed countries are in great demand
- Q: Product category and comparison of solar thermal utilization
- The solar industry did a survey on the overall evaluation of the use of solar energy users, think very satisfied with only 3.5% basic satisfaction was 12.6%, average and unsatisfactory accounted for 35.2% and 48.7%; the user evaluation of the service, satisfied and satisfied for a total of 24%, and that no service dissatisfaction accounted for 76%.
- Q: Solar energy has some disadvantagesDetailed description of the problem, to help the respondents give accurate answers
- Disadvantages of solar energy:The use of solar energy has its drawbacks:First, the current density is low, the sun is better, the ground floor area of 1 square meters of energy received only about 1 kilowatts. It is often necessary to set up a large number of lighting surface to meet the use requirements, so that the large area of equipment, materials, cost increases.Second, the greater the impact of the atmosphere, to bring a lot of difficulties.
- Q: Solar energy products, that is, I would like to open a home solar products Daquan
- Photoelectric, two large blocks of light and heat, I think it will be a complete. But a lot of financial strength to do it
- Q: Now there is no sun, cloudy days can use solar products?
- At present, I have not found this kind of solar energy
- Q: PV solar products market sales
- According to the State Administration of taxation policy released last year, from October 1, 2013 to December 2015 3l, according to the 3% levy rate calculation. In Takamatsu as an example, if a month sales of 30 thousand, that he should pay the tax is 30 thousand x 3% x 50%=450 yuan.Residents issued 1 kwh of electricity, the state subsidy of 0.42 yuan; the national standard for the purchase of electricity from the desulfurization of residents with endless self generating electricity, the price is $0.42 per degree. To install and use a set of distributed photovoltaic power generation system with an average of 1 kilowatts of installed cost about 10 thousand yuan, if the 8 kilowatt system daily generating capacity of 30 degrees, 5 degrees every household consumption (no more than a price of 0.52 yuan), about 8 years to recover the investment
- Q: Good solar polymer or monocrystalline
- Strongly recommended products tested in the sun or cloudy days will not be worse than the single crystalPolycrystalline solar panels solar panels with batteries, our company is committed to the development of solar cell production, processing and sales as one of the most professional. Product solar panels: respectively, including epoxy encapsulated battery board (PET process components) monocrystalline silicon, polycrystalline silicon, as well as laminated toughened glass packaging large components and amorphous silicon solar panels. Can also be produced by a variety of shell materials or solar panels processing production cooperation. Products are widely used in small and medium-sized solar lighting, solar street lights, electric cars, mobile phones, toys, calculators, digital chargers, POLY crafts, can drive small motors, such as charging, power generation with. We can design according to your requirements. Respect every buyer to buy and put into operation
- Q: Solar energy product development prospects?
- 3 local regulations activate the project market, the development of the industry ushered in new growth, the rapid development of solar water heating system engineering market, government policy support. Engineering market is mainly concentrated in the town, the construction of new rural residents in the housing construction, but also for the development of the engineering market provides a new opportunity. To November 2010, some enterprises in the hot water system engineering sales have accounted for the overall sales of 40%, compared with the previous total of only 5% to 15% of the proportion, this growth can be described by leaps and bounds. In the completion of the sale after the maximum sinking, hot water engineering market city building will become the brand of a hotly contested spot, always adhere to the rural areas as the focus of the strategy in the next few years, may turn to the rural market both strategic transformation development market as the leading city.
- Q: The advantages and disadvantages of solar energy?Want to buy solar energy solar energy what is bad? Know about
- I personally think that the use of solar energy is not very environmentally friendly, because the market is currently the main products of solar energy use monocrystalline silicon or polysilicon, thin film with very little. We all know that silicon is a heavy metal, pollute the environment and can not be removed, because the film component cheap but the conversion rate is low, can only be used in small products, such as computer, application of technology products such as lamps, although the silicon conversion rate is high but the price is expensive, so the application of products currently on the market to see the most use of polysilicon, 25 years after this type of product, service life expires, how to deal with??? Is a problem, so I still want to improve the conversion rate of thin film components.
- Q: The best authoritative research report, even if their YYThank you for the answer to the first floor, but I found the 2000 water heater Research Report, although a bit long, but you can also use
- Competitor analysisThe solar water heater industry faces competition and substitute competition, has formed a professional brand, regional brand, brand and brand-name appliances co-exist in the market, the industry has fish, uneven in quality situation. With the competition and homogenization aggravating industry "reshuffle" is inevitable in the competition, need to break through the differences, creating a unique selling point, can focus on the product itself, can also be separated from the product itself, to create new demand from the consumer point of the competition range, consumers in the purchase of solar water heater in the purchase of solar energy is not, but convenient, safe, saving, healthy use of hot water. If you can surround the tube"
Send your message to us
15Ah cylindrical cell Lithium-ion CNBM rechargeable batteries 15Ah lithium battery
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
