Flake Graphite Cast Iron

Hot Products

NON-RISING STEM WEDGE GATE VALVE DN40-DN600

globe valve ； CLASS150--900 gate valve ;

Cast Iron gate Valve Standard:DIN Structure: Gate Pressure: Medium

Cast Iron Gate Valve Certificate:ISO9001 CE Standard Structure: Gate Pressure: Medium

cast iron gate valve wooden box outside Standard Structure: Gate Pressure: Medium

Cast Iron Gate Valve 15--60days Standard Structure: Gate Pressure: Medium

GATE VALVE RISING STEM RESILIENT SOFT SEATED DUCTILE IRON BS5163

GATE VALVE FLAT API PN16/ PN25/ PN40 /PN64

Cast Iron Gate Face to Face Dimensions:DIN3202F5 Structure: Gate Pressure: Medium

GATE VALVE SOCKET ENDS NON-RISING STEM RESILIENT SEATED DUCTILE IRON DN50 - DN300

FAQ

What is the difference between gate valve Z41T and Z45T?

Valve Z41T and Z45T difference is that "41" is dark rod, that is, the screw is not out of the turbine,"45" is the bright rod, that is, the screw out of the turbine.Common points are copper sealed gate valves.

The difference and use of gate valve and stop valve

Medium flow is unrestricted.When opening fully, the sealing surface is eroded by the working medium smaller than the cut-off valve.The shape is relatively simple and the casting process is better.The valve is used in the system is relatively large, to close the gate off system; and the valve is used in the system is relatively small, and to adjust the flow quantity of the system, can not be closed gate and globe valves of different specifications for many kinds of occasions, the valve rod valve the dark bar gate valve, wedge gate valve, single valve, multi valve valve body structure is different, large volume.

Function of signal butterfly valve and gate valve

The signal butterfly valve applies to petroleum, chemical, food, medicine, papermaking, water and electricity, ships, water supply and drainage, smelting, energy and other system pipelines. It can be used as regulating and throttling devices in a variety of corrosive, non corrosive gases, liquids, semi fluids, and solid powder pipelines and containers. It is widely used in high buildings, fire protection systems and other piping systems that need to display valve switching status.

Which is the most expensive, check valve and gate valve?

In the case of DN50 Z15T-16 DN50: screw valve 46.200 thread copper bar gate valve Z15T-16 DN50 52 Z45F-16 DN50 97 flange valve flange valve rod Z44T-10 DN50 169 Z45T-116 DN50 flange valve dark bar 173 thread swing check valves DN50 52.090 thread straight type check valve DN50 57.280 flange screw check H44T DN50 129 flange valve lift check valve H41T-16 DN50 124

What is gate well?

Technical requirement:1: the valve itself can not seep, it must ensure its tightness;2: water supply pipeline during use, pipeline will be pressure from different aspects, which will produce different degrees of jitter or settlement, which requires the connection of water supply pipes and valves in the well to be reliable, able to adapt to a certain degree of jitter and settlement, and to prevent water infiltration into the well chamber in the pipeline valve wells; deep, slightly larger are generally made of cast iron valve (such as the cut-off valve, butterfly valve) iron valves long-term immersion in water, will affect the service life or cause fracture, so the sealing requirements are higher;3: valve shaft, shaft and well body, manhole cover way of connection should be reliable, not because of heavy rain or water seepage water into the well room.4: valve well is buried in the ground, to bear from different directions of different pressure, and different chemical substances corrosion and damage, and requirements of its pressure capacity and acid and alkali corrosion is better.

What are the structural differences between parallel and wedge valves?

The double gate is pushed aside so that the sealing surface of the valve gate is tightly sealed with the valve body. These double gate parallel gates are mostly used on low pressure pipelines such as small pipelines. Parallel gate valves are also available with single gates, but are rare.That the sealing surface has a certain angle with the vertical center line, bearing higher medium temperature valve, angle the greater the possibility to reduce the temperature when wedged gate rice.Wedge gate valve single, double all.

Why is gate valve or butterfly valve used for water pump?

General pressure is small, use the butterfly valve, when the pressure is big, use the gate valve. The two main function of the valve is to adjust the flow and easy to overhaul.Zibo Boshan new Duke water supply equipment

How to distinguish between gate valve and cut-off valve?

Two can be closed, in the flow of linear requirements are not high, you can adjust the flow. Just because of its structural characteristics of the valve to make its flow resistance, so there is a demand for throttling with a little more than the gate valve. In addition, the cut-off valve, whether it is a formal or reverse installed, in the opening and closing process, there is always a very difficult, and therefore can not do a great deal, or it is not easy to open and close. In addition, the cut-off valve has a one-way sealing effect of good features, so in the prevention of reverse flow of the working fluid, it also has a place to play.Hope to be of some help to you!